Salsapants27 Posted August 23, 2022 Share Posted August 23, 2022 Welcome everyone! New to this hobby. I just recently aquired my grandfathers old detector that he bought new back in 2003(ish?). It's a Whites 5900/Di Pro model. He got sick around the time he bought it, and never used it. Its been in its case ever since. Just pulled it out today and other than the battery box, it looks like it's brand new. Im trying to get any info from people that actually used this model might have. As mentioned, the only issue that I can see is the battery box. The batteries that were in there were there since he purchased it and they were (to say the least) verrrrrrrry nasty. Appreciate any help! 2 Link to comment Share on other sites More sharing options...
kac Posted August 24, 2022 Share Posted August 24, 2022 Welcome to the forum. Lot of Whites users here that should give you some good pointers. Link to comment Share on other sites More sharing options...
JCR Posted August 24, 2022 Share Posted August 24, 2022 Visit the Detector Database at the top of this forum's header. You will find a lot of information. That is still a good detector. Link to comment Share on other sites More sharing options...
Tony Posted August 24, 2022 Share Posted August 24, 2022 Or just do a search on the model right in this website. If you got to “AHRPS” website…..Monte will chime in big time for you. Link to comment Share on other sites More sharing options...
rvpopeye Posted August 24, 2022 Share Posted August 24, 2022 Welcome aboard ! Use white vinegar on the batt box.? Link to comment Share on other sites More sharing options...
Cascade Steven Posted August 25, 2022 Share Posted August 25, 2022 Welcome to the forum?. Just a little food for thought on cleaning the battery box. If the white vinegar method does not produce the desired results may I suggest a solution of baking soda. I have used a baking soda solution successfully to clean corroded battery compartments. The solution I use is 1 level teaspoon of baking soda in one cup of warm water, mixed together (dissolved) in a glass or plastic container. When batteries leak they emit an acid. The goal is to find something that will neutralize the acid. A chemical base will neutralize the acid and baking soda is a very mild chemical base and will accomplish the task. For small areas or tight spaces I dip a cotton swab into the solution and rub it onto the affected area. Multiple swabs may be needed for larger projects. You may notice some bubbling as the baking soda solution neutralizes the acid. These bubbles are the harmless gas carbon dioxide, the same gas that we exhale. When the surface is relatively clean I dry it with a cloth or let it air dry. If there is a lot of corrosion, then it may be necessary to repeat the cleaning process and also let the baking soda solution sit on the affected area for a half hour or so during each cleaning cycle to accomplish its task. Hope this helps and best wishes with you metal detector. 4 Link to comment Share on other sites More sharing options...
Salsapants27 Posted August 27, 2022 Author Share Posted August 27, 2022 On 8/24/2022 at 4:57 AM, rvpopeye said: Welcome aboard ! Use white vinegar on the batt box.? Awesome! I appreciate the tip! Link to comment Share on other sites More sharing options...
Salsapants27 Posted August 27, 2022 Author Share Posted August 27, 2022 On 8/24/2022 at 10:40 PM, Cascade Steven said: Welcome to the forum?. Just a little food for thought on cleaning the battery box. If the white vinegar method does not produce the desired results may I suggest a solution of baking soda. I have used a baking soda solution successfully to clean corroded battery compartments. The solution I use is 1 level teaspoon of baking soda in one cup of warm water, mixed together (dissolved) in a glass or plastic container. When batteries leak they emit an acid. The goal is to find something that will neutralize the acid. A chemical base will neutralize the acid and baking soda is a very mild chemical base and will accomplish the task. For small areas or tight spaces I dip a cotton swab into the solution and rub it onto the affected area. Multiple swabs may be needed for larger projects. You may notice some bubbling as the baking soda solution neutralizes the acid. These bubbles are the harmless gas carbon dioxide, the same gas that we exhale. When the surface is relatively clean I dry it with a cloth or let it air dry. If there is a lot of corrosion, then it may be necessary to repeat the cleaning process and also let the baking soda solution sit on the affected area for a half hour or so during each cleaning cycle to accomplish its task. Hope this helps and best wishes with you metal detector. It wasn't as bad as i'd have expected for 16 year old batteries, but it was still pretty gnarly. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now