phrunt Posted August 6, 2023 Share Posted August 6, 2023 12 hours ago, AFinley said: I was planning on just going back to the original software, but I see now that that is not an option? You can easily revert back, there is a little dots thing that doesn't stand out in the firmware update tool you can click and revert back, if you read the entire thread you'll see all about it and how to do it. 1 1 Link to comment Share on other sites More sharing options...
TerryinHawaii Posted August 6, 2023 Share Posted August 6, 2023 Do not forget to do a reset after downloading the older software. 1 Link to comment Share on other sites More sharing options...
AFinley Posted August 6, 2023 Share Posted August 6, 2023 10 hours ago, phrunt said: You can easily revert back, there is a little dots thing that doesn't stand in the firmware update tool you can click and revert back, if you read the entire thread you'll see all about it and how to do it. Yep, thanks. Shortly after I posted I saw that, so I’m now back to the original version. Link to comment Share on other sites More sharing options...
GB_Amateur Posted August 7, 2023 Share Posted August 7, 2023 19 hours ago, AFinley said: I was planning on just going back to the original software, but I see now that that is not an option? You need to dig deeper into this forum's posts. At first people thought you couldn't go back but there are three dots ( ... ) in the lower right hand corner of the update window which allow you to do so. Addendum: I didn't read far enough in this thread, either. I now see that Simon (phrunt) already pointed this out. 2 Link to comment Share on other sites More sharing options...
Medina Posted August 15, 2023 Share Posted August 15, 2023 mornin' so...whats the consensus? Revert, or a noticed specific issue with the new update? This is the busiest time of year so I'm trying to read the pages/forum, but work continues to whine till I focus on it... haven't been swingin since.... almost 3 weeks ago ffs... thanks in advance Link to comment Share on other sites More sharing options...
Yatahaze323 Posted August 15, 2023 Share Posted August 15, 2023 2 hours ago, Medina said: mornin' so...whats the consensus? Revert, or a noticed specific issue with the new update? This is the busiest time of year so I'm trying to read the pages/forum, but work continues to whine till I focus on it... haven't been swingin since.... almost 3 weeks ago ffs... thanks in advance Kinda depends on the areas you're hunting. It seems if you're in moderate to higher mineralized soil the old software might work better. Look through the thread for the videos by Abenson showing the differences between the two. I'm keeping the update cause I don't have heavily mineralized soil. Plus I like the new stabilizer feature for the heavy iron sites I hunt. Even without using the stabilizer it seems quieter and has less falsing. 3 Link to comment Share on other sites More sharing options...
Medina Posted August 16, 2023 Share Posted August 16, 2023 thanks, I'll revisit the vids. Like I said...been 3...4.. weeks since I was sweeping.. LOST a 1900 house site due to construction, house gone, another foot of topsoil on top of the front yard area... looking forward to wringing this one out when the year slows down- Link to comment Share on other sites More sharing options...
TTT2866 Posted August 24, 2023 Share Posted August 24, 2023 Deeper if anything. I pulled some nice coins in Australia that were down 13-14 inches. Loud and clear. Video here https://www.instagram.com/p/CwWCRqxrrBX/?hl=en 1 Link to comment Share on other sites More sharing options...
soreshoulder Posted August 29, 2023 Share Posted August 29, 2023 I was excited to try the update but unfortunately the update rendered my Manticore seemingly useless for anything deeper than 2" at one of my sites in WI. I was forced to reduce sensitivity. Constant 98 falsing/signals everywhere. I would have been happy if it was simply a matter of turning the stabilizer function off. But there is definitely something different happening even when it is turned off. Thank goodness the software tool let me revert back to the old software! I'm hoping they fix this in the future or I will never be able to utilize new software features using this state of the art $1600 machine. I'm glad to hear I'm not the only one having trouble with the update. I haven't heard any official recognition of the issue and hope we don't go unheard. 1 1 Link to comment Share on other sites More sharing options...
phrunt Posted August 29, 2023 Share Posted August 29, 2023 Minelab rarely ever apologise for their mistakes, I'm still waiting for the apology that they released the Pro-Find 35. ? 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now