abenson Posted January 29 Share Posted January 29 You can try either updating you software or go back to an older version and see if that helps. Link to comment Share on other sites More sharing options...
GB_Amateur Posted January 29 Share Posted January 29 In what sensitivity setting are you operating for these tests? Link to comment Share on other sites More sharing options...
dman97844 Posted January 31 Author Share Posted January 31 I've tried everything from 10 to 25. I've already contacted minelab and they had me ship it to the service center. after I hear from them I'll post a follow up. 1 Link to comment Share on other sites More sharing options...
bklein Posted January 31 Share Posted January 31 On my trifield meter the all terrain was a high output mode. Maybe you have an issue with the detector or coil resulting in too low tx signal in the other modes. Link to comment Share on other sites More sharing options...
steveg Posted January 31 Share Posted January 31 On 1/28/2024 at 2:50 PM, dman97844 said: Ok thanks Steve..what about the vdi issue is that normal on a manticore? NO, VDI increasing in other modes is not correct, either. You might see a digit or two difference at most, but a nickel going from 27 to 39? No, something is definitely wrong... Steve Link to comment Share on other sites More sharing options...
steveg Posted January 31 Share Posted January 31 Yes, please do let us know what you find out, after Minelab receives the machine and checks it out. Thanks! Steve Link to comment Share on other sites More sharing options...
BigSkyGuy Posted February 1 Share Posted February 1 On the first Equinox 700 that I bought dimes and quarters read as iron. I sent it back and ML sent me a new one. 1 Link to comment Share on other sites More sharing options...
dman97844 Posted February 1 Author Share Posted February 1 I just got a call from minelab it ended up being a defective coil. Turns out they had a bad batch of coils that went out to other customers as well. Thanks for all your help. 3 Link to comment Share on other sites More sharing options...
Yooper Posted February 2 Share Posted February 2 Interesting. Seems like the repair shop jumped on assessing the problem rather quickly. Link to comment Share on other sites More sharing options...
Tony Posted February 2 Share Posted February 2 Was this problem with the standard issue M11 coil? Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now