martygene Posted June 23, 2017 Share Posted June 23, 2017 has anyone played around with silencer much? Whenever I switch reactivity you know that the silencer changes with it and I usually then adjust silencer to 0 but I SHOULD try silencer where the reactivity says to... but I don't. Has anyone played around with it much to see what effects it has? thanks for all the great posts. gene Link to comment Share on other sites More sharing options...
Condor Posted June 23, 2017 Share Posted June 23, 2017 All I know is one of the videos, testing the various Deus functions, showed a significant depth loss by adding too much silencer. I have only used mine for gold prospecting, but I always adjust to 0 just in case. My own testing has been relatively sparse using the 9" HF coil on gold nuggets. Link to comment Share on other sites More sharing options...
Deft Tones Posted June 25, 2017 Share Posted June 25, 2017 Silencer filter kills depth. It also causes loss of subtle tone variations when in full tones mode. I always keep it off unless I forget while making changes on the fly. And yes, it is super annoying XP couldn't divorce the reactivity settings from the silencer filters. Link to comment Share on other sites More sharing options...
strick Posted June 26, 2017 Share Posted June 26, 2017 -1 is what I always keep it on. strick Link to comment Share on other sites More sharing options...
Mark Gillespie Posted June 27, 2017 Share Posted June 27, 2017 Did a lot of side by side comparisons on deep +7" targets and found in fairly clean ground a setting of 0 on the Deus would still provide enough depth. When increased to 1 or 2, then the deep targets failed to respond. 1 Link to comment Share on other sites More sharing options...
Steve Herschbach Posted June 27, 2017 Share Posted June 27, 2017 The Deus Silencer setting is like most filters. Nearly all work by trying to eliminate weak signals in favor of stronger signals. This being the case, applying a filter always results in some loss of depth and sensitivity. The trick is that that problem you are trying to fix (false signal) has to be worse than the problem you cause (decreased sensitivity). The Silencer is supposed to reduce faint spurious signals created in dense ferrous trash. Let's say on a scale of 1 - 10 most good targets beep at 6 and above, but you are getting lots of distracting faint 1 and 2 signals. Increasing the Silencer can greatly reduce these faint false signals allowing you to concentrate on the better signals. Now on a later hunt this spot is "cleaned out" and you want to find what you missed. It may be that one of the faint 1 - 2 signals is a faint good target. By reducing the Silencer setting or turning it off, you now get these faint hits. Thirty are false signals but one is that nice silver coin you were looking for. Of course they could just as easily all turn out to be trash. Basically, I leave filters turned off unless forced to use them. I know when this is because I am ready to give up because of too many false signals or "noise". Apply just enough filter to do the trick, and no more. As always it is an individual thing as we all have different tolerance levels both for noisy detectors and for the amount of trash we are willing to dig to get a good item. People who do run detectors noisy basically don't trust the machine to do the filtering and prefer to use their ears instead. This can be fatiguing and a judicious application of a filter can result at the least in a more pleasant detecting experience. 3 Link to comment Share on other sites More sharing options...
rehupuntti Posted June 28, 2017 Share Posted June 28, 2017 -1 silencer...reactivity 2.... 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now