Jump to content

Trx Pinpointer Song Easter Egg


Recommended Posts

Today was out in a park, shooting coins with a friend. (Between us, got three forties wheats, 1940 Jefferson, a Mercury, and a silver ring) Beauty weather for December: high fifties, sunny. Nice day. In the middle of it all, whilst I was rooting in a hole, my TRX pinpointer started playing a song! I thought it was telling me to change the battery. No, it was playing a weird little ditty. Neither my friend or I could recognize the tune. Anyone have any light to shed on this? I found a YouTube video from 6 six years ago, but I'm not even sure it was the same song... I wish I had thought to record the song with my phone, but I admit I failed to think fast enough.   😞     Oh, White's Electronics, you shall be missed!

  • Like 5
Link to post
Share on other sites

The little ditty, is Money Money Money by Abba.  I wish less time was spent wasting time on an easter egg, and more on the development and testing.  I had no end of trouble with the TRX, water ingress, around the on off switch, foam insert in battery cap failing and not pushing against the battery,   sounding off when nowhere near ground especially if you rotated it towards the sky.

All were known issues, I had 4 TRX's in the end White's UK replacing them.  I went back to my old garrett pinpointer

Link to post
Share on other sites

I think my ML Profind 35 plays green acres in monotone but that could be the iron audio if I hold it just right...

  • Like 1
  • Haha 1
Link to post
Share on other sites

Did you have to hit any buttons in a sequence to get the easter egg or was it just random?

I think that is one of those cool things that makes machines interesting.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By mh9162013
      I've been debating whether to get a Fisher F-Pulse due to its greater sensitivity compared to my Garrett Carrot. But I wonder about its "closing range." What's that? Let me try to explain.
      Today, I tried using my Garrett Carrot for a full hunt, but had it on maximum sensitivity. I appreciated its extended range as it made it easier to determine if my target was in my plug or hole. However, I realized that the greater sensitivity isn't as useful as I had hoped given the amount of trash where I hunt. So while my Fisher F2 could discriminate out trash, during my dig, my Garrett Carrot might detect a piece of trash before it could get the actual target I was digging for.
      But I confirmed that the greater sensitivity of my Garrett Carrot isn't as useful as I had hoped because of the short "closing range" it had. What I'm referring to is its ability to change its beeping as the poinpointer gets closer to the target.
      For instance, the pinpointer might detect a target 3 inches out. But when it's still 1 inch away, the steadily increasing beeps have stopped and now it's a solid tone. And it stays this solid tone no matter how much closer you get to the target. Ideally, the steadily increasing beeps (what I'm referring to as its "closing range") will continue until the pinpointer is touching the target.
      I see tons of videos on a pinpointer's sensitivity. But none on its "closing range." I'm realizing that having a pinpointer with the ability to detect a coin at 4 inches, but only has a "closing range" of 2 inches may not be as useful as a pinpointer with the ability to detect a coin at 3 inches, but has a closing range of 2.75 inches (assuming this kind of pinpointer even exists). I also understand that the size of the target makes a big difference. With my ring, I may never get a solid beep from my pinpointer even when it touches my ring. Yet when next to a metal trash can, I get the solid beep when the pinpointer is 4+ inches way.
      So my question is: what pinpointer(s) have the best closing ranges? For example, the Fisher F-Pulse has the best (or among the best) range/sensitivity of most major pinpointers on the market. But does it have a correspondingly long closing range, too?
    • By GeoBill
      I recall that there were several people here who were looking for the TRX pinpointer and not finding them in stock anywhere. I was just looking at the Centreville Electronics website and they have them listed in stock for $199 with 2 year warranty. I was able to add one to my cart so it appears real.
      https://www.centrevilleelectronics.net/newunits.htm
      Cheers
    • By Mr Swing king
      Hey everyone! I just upgraded to a nox 800 at the start of the month, moving over from a simplex and pulsedive. I was having trouble getting used to the nox at first and was thinking of sending it back because I couldn't even detect in tot lots. Thanks to some posts on here, it's going a lot smoother.
       
      My question is this, is there a way to pair the pulsedive with the equinox headphones?
    • By SG CT
      This morning I wanted to charge my XP MI-4 pinpointer but couldn't open the knob covering the charging plug. After many fruitless attempts, I contacted XP service at metaldetector.com. In an on-line chat, they suggested soaking the tip in warm water for 15 minutes, then to try twisting to open and even reversing directions a few times. After a few tries, this worked.
      Hope this helps anyone else who might have this problem.
       
    • By GeoBill
      Earlier people were looking for a TRX pinpointer. Centerville Electronics has a refurbished one on their used page for $95 with a 6 month warranty. Already have one or I would have jumped on it.
      Cheers
    • By schoolofhardNox
      Does anyone know specifically what goes wrong with the Garrett AT pin pointers? Both of mine were sent in previously, and both of them developed the same issue again. They turn on but do not detect any metal. Is it the electrolytic capacitor, the flat pack The IC or is it in the coil itself that is the problem? Is that long rod a radio frequency coil? I'm kinda getting tired of pin pointers dying like that. Any ideas would be helpful.
×
×
  • Create New...