strick Posted January 7, 2023 Share Posted January 7, 2023 On 1/6/2023 at 4:58 AM, George Kinsey said: I have also noticed on many videos that ground mineral noise is mistaken for actual iron targets. Just some thoughts. What say you. This 2 Link to comment Share on other sites More sharing options...
midalake Posted January 8, 2023 Share Posted January 8, 2023 13 hours ago, Ringtail said: I also think that auto ground balance drifts when you spend extra time investigating an iffy target causing changes in discrimination and sensitivity. These are just my opinions based on years of using a V3i then an Equinox 800. Maybe auto ground balance is better than I thought, There were what I call "rumors" or "feelings" about Tracking Ground Balance in the beginning. ALL FALSE with an Equinox 800. If anyone would know it>>would be me. In 4 years, I have investigated 1000's of targets that would not TID with the horseshoe mode on. The faintest of whispers when first found. NOT ONCE have I had to switch out of Tracking GB because of some issue where the target gets weaker or lost. There is not much more I can say...... Link to comment Share on other sites More sharing options...
longbow62 Posted January 8, 2023 Share Posted January 8, 2023 I have witnessed a starting ground balance of X with tracking ground balance accidentally left on. It drifted quite a bit by the time I noticed auto tracking was on. I re-grounded balanced and it was back to very close the original ground balance number. This has just been my experience. Hunting on land I don't think I want tracking on, but a person should use whatever works for them. 2 Link to comment Share on other sites More sharing options...
Digalicious Posted January 8, 2023 Share Posted January 8, 2023 My fear with ground tracking on trashy sites, is the detector ground balancing over a target...and in trashy sites, the coil is almost always over a target. I imagine there are algorithms that try to average out situations like that, but still. Then again, I'm thinking ground tracking isn't designed for trashy sites, or most sites for that matter. More for non-trashy sites in which the ground mineralization changes as you wonder around. 4 Link to comment Share on other sites More sharing options...
khouse Posted January 20, 2023 Share Posted January 20, 2023 It blows my mind how many videos I've seen of not ground balancing. To me this is tied with noise cancel as being #1 in stable performance. 2 Link to comment Share on other sites More sharing options...
Daniel Tn Posted January 20, 2023 Share Posted January 20, 2023 Yes yes yes!! Not ground balancing, and then also doing comparisons with 2 or 3 (or more) detectors with ALL of them on at the same time, right beside one another. It drives me batty. I also agree that the noise a lot of them are hearing is feedback/blow back from not balancing. I was running Auto Tracking on the Manticore this past hunt and could hear the ground changes way before the machine actually auto tracked to it. In that regard, by manual balancing, I could keep up with it faster than Auto could, and stay on top of it. Link to comment Share on other sites More sharing options...
Shelton Posted January 20, 2023 Share Posted January 20, 2023 You should to always ground balance to obtain right ground stability. Some machines without it could be terribly noisy... Link to comment Share on other sites More sharing options...
palzynski Posted January 20, 2023 Share Posted January 20, 2023 1 hour ago, Shelton said: You should to always ground balance to obtain right ground stability. Some machines without it could be terribly noisy... Over here in France the soil is low or moderately mineralized, ground balancing doesnt change anything the detectors are already stable with their default fixed GB setting . I have done bed tests ( moderately mineralized soil) comparing the depth and stability without GB and with GB . There is definitely a slight improvement when doing the GB but I prefer to save time in the field and the default fixed GB setting works very well for me for me at least for XP ( D1 and D2 ) or ML ( Equinox 800 ) .. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now