Gary985112 Posted January 24, 2023 Author Share Posted January 24, 2023 43 minutes ago, F350Platinum said: That's the beauty of the Equinox, and what it's revered for ?. I love mine. I've found both the earring and the tiny clasp 3 feet apart! ?They get flung off towels. From all I've read here another thing that will give you fits (if you find it not being detected) is an open gold hoop earring. The heavy hitters can explain it much better than me, but it has something to do with the shapes. I found that ring my first beach hunt, and a 10k ring on a hill behind my house, that was in my first year. Nether was marked so somebody took me under their wing and showed me how to test gold with an acid kit. Forgot about those... ? This past year I've found 4 hallmarked gold rings! But I only go to the beach a few times a year. "Persistence pays off" is another tenet of metal detecting. ? Sorry to always jump in man, I'm testing my knowledge of the subject, and looks like I'm doing ok by the likes. ? Others will be along soon. ? That's awesome! ? No feel free to chime in anytime ha. I love talking about metal detecting and I still have a lot to learn. I've found 3 hallmarked rings and I just all the time wonder if I am missing something. I want to make sure I am set up to find just about anything metal out there lol. 2 Link to comment Share on other sites More sharing options...
unox Posted January 24, 2023 Share Posted January 24, 2023 When I get a 1 or 2 with the 800 I always get a bit excited. The Equinox is renowned for throwing up those numbers for some types of Gold Jewelry as seen in F350 post. If you look at my profile pic that small nugget that you see on the end of the coil came in as a 1 as well. 4 Link to comment Share on other sites More sharing options...
F350Platinum Posted January 24, 2023 Share Posted January 24, 2023 Just had a thought: If you're getting lots of 1s and 2s that happen spontaneously when the machine has been running quiet, you might be hitting little "waves" of black sand, or you are just at the edge of the water enough to catch moving water. At that point you might want to lower sensitivity or change your beach program to the other. Look what your coil is over, change accordingly. I generally go to beach 2 when the sand is getting wet from the waves. That little ring was high on the beach which is why it stood out. The other I found on the hill was a 10/12, what I would expect for a thin small ring ? 2 Link to comment Share on other sites More sharing options...
strick Posted January 24, 2023 Share Posted January 24, 2023 8 hours ago, Gary985112 said: Wait, it didn't pick up the chain at all? Even going over it? Was iron bias the reason? Or was there another reason as to why the 800 didnt pick it up? The detector sees the links on a chain as individuals not as one big piece of gold. Often they are too small to detect Plus gold is a lower conductor which makes it even harder.. When you are digging gold chains you are more often then not hearing the more solid metal clasp rather then the links of the chain...so yea your gonna want to be digging ones and twos if your looking for chains. Strick 3 Link to comment Share on other sites More sharing options...
Knomad Posted January 25, 2023 Share Posted January 25, 2023 Be Aware, In Gold Mode in typical gold country, a 1 or 2 or bouncing between them is Very Common, and it often will be small gold or lead. BUT, a solid 1 is much more likely to be aluminum foil, a solid 2 is not often foil, and may be gold, a 1-2 that becomes a 2 or higher as you dig closer may also be gold, But keep all iron discrimination off, and if Negative numbers consistently pop up with Positive Numbers, it becomes more likely that iron is fooling the detector. AND, Just Slightly larger gold will often readout what I call - a Perfect 10.! Side Note -- Discrimination does lower overall sensitivity, the more you eliminate the more it effects general sensitivity, Especially in Gold Modes that will often give you Maximum sensitivity and depth in most soils, but may be too unstable for salt beaches. SO, YES, readings of 1 or 2 can be good.! 1 Link to comment Share on other sites More sharing options...
midalake Posted January 25, 2023 Share Posted January 25, 2023 On 1/23/2023 at 7:53 PM, Gary985112 said: Wait, it didn't pick up the chain at all? Even going over it? Was iron bias the reason? Or was there another reason as to why the 800 didnt pick it up? Some chains are too small to detect. I have little foil here, so 1 and 2's for me are gold chains or small pendants. Iron Bias 6 or below will not affect the reading of a gold chain. 1 Link to comment Share on other sites More sharing options...
FloridaSon Posted January 26, 2023 Share Posted January 26, 2023 I run no discrimination also and lowered the volume of the iron so it can barely be heard. Makes it easier to focus on the non ferrous tones. 1 Link to comment Share on other sites More sharing options...
Badger-NH Posted January 28, 2023 Share Posted January 28, 2023 On 1/24/2023 at 8:17 PM, Knomad said: Side Note -- Discrimination does lower overall sensitivity, the more you eliminate the more it effects general sensitivity, Especially in Gold Modes that will often give you Maximum sensitivity and depth in most soils, but may be too unstable for salt beaches. That may have been true of detectors of long ago but not of most modern detectors like the Equinox. All discrimination does is turn off the sound associated with certain VDI numbers. It has no affect on sensitivity or depth. The advantage to running no discrimination is that it allows you to hear the full audio signal of all targets. 4 Link to comment Share on other sites More sharing options...
Knomad Posted February 5, 2023 Share Posted February 5, 2023 This is not a Theory, I have repeatedly tested the sensitivity and dept in Gold 2 Mode in the bad ground of gold baring areas. Maximum Sensitivity and depth is with No Discrimination and running as hot as you can, at these settings it acts almost like an analog detector but with target I.D readout. The more numbers notched out the more time the detector is processing that signal instead of just reporting the signal, and so if that is a small target in ground it is fighting to find it in that extra processing can take away from it reacting to that target. I find that if most hot ground and hot rocks read -7, -8 or-9, -8 and -9 most common, if needed I can notch out one or both of them with little loss, the more numbers notched out the more it effects both depth and sensitivity. NOTE -- If you are hunting big targets like coins in good or modest ground you may not notice it, But try a small target at near max detection depth in other modes, then try the gold modes, in most cases you will gain depth. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now