Jump to content
Website Rollback - Latest Updates ×

Has Anyone Tried Non Minelab Bluetooth Earphones Yet Apt-x


NSC

Recommended Posts

3 hours ago, Wayfarer said:

Steveg good info.  Just curious, but which aftermarket brand is identical to the Minelabs AND is aptx-LL?  The Miccus SR-71's look identical and at least claim to be LL.  What are the other brands?

Wayfarer --

ZZSY makes a BT80 set that are NOT low-latency, just aptX (this is the pair I have that I'd sell).  Iselector also has a BT80 that is just aptX, not aptX low-latency.  Then, there is a version made by Trond (model TD-BH01 and it has a few extra features on it, so it's a tad more expensive, but the look is identical and it is aptX low-latency).  The Miccus SR-71 Stealth are identical, and low-latency.  There are a few others...

Steve

  • Thanks 1
Link to comment
Share on other sites


6 hours ago, Wayfarer said:

There shouldn't be any noticeable lag.  You need to make sure it is connected in LL mode by looking at the LED on the headphones after you make the connection.  If it doesn't connect in LL mode, then you need to reset the headphones and try again.  Once you get them to connect in LL mode, then don't fully reset the phones, just turn them off and then next time you connect them, they should quickly connect in LL mode.  It was a little tricky the first time I set them up, but since getting them to work properly the first time, I haven't had any more difficulty. 

This is true of any LL headphones and why you should get a model that has an LED indicator (like the Audition Pros) to verify they are indeed connected in LL mode.  

Thanks Wayfarer.  I did check that, and they were connected in LL mode based in the led indicator light.  I will probably do a full factory reset on the E600 and re-pair the headphones and see if that helps.  Tim

Link to comment
Share on other sites

What has been the experience here with noise cancelling phones?

I had some hardwire ones I loved.  I bought them originally for the plane and they had a battery power but I used them with great success on my GPX and SE Pro.

Mitchel

Link to comment
Share on other sites

  • 2 weeks later...

The LEVN M78 Earphones came in today via DHL direct from the factory in China.

Info from box: IPX7 Waterproof, Bluetooth V4.2, Aptx Low Latency

They appear to be the real deal as far as Low Latency. The "+" symbol comes up on the NOX display.

They will pair with the NOX and my S7 concurrently. I took them to my test garden and they sounded good and had no apparent lag. Tried 5 tones and 50; both sounded good and volume seemed more than adequate. They are not as loud as the NOX headphones, but I doubt many of the small BT buds will be.

I much prefer earbuds to headphones in most situations. Much cooler in the summer and I can bundle my head with caps and hoods easier in the winter.

If I find any issues after hunting I will report back.

20180418_173118_001_resized.jpg

20180418_173352_001_resized.jpg

20180418_184338_resized.jpg

  • Like 2
Link to comment
Share on other sites

10 hours ago, parkgt said:

The LEVN M78 Earphones came in today via DHL direct from the factory in China.

Info from box: IPX7 Waterproof, Bluetooth V4.2, Aptx Low Latency

They appear to be the real deal as far as Low Latency. The "+" symbol comes up on the NOX display.

They will pair with the NOX and my S7 concurrently. I took them to my test garden and they sounded good and had no apparent lag. Tried 5 tones and 50; both sounded good and volume seemed more than adequate. They are not as load as the NOX headphones, but I doubt many of the small BT buds will be.

I much prefer earbuds to headphones in most situations. Much cooler in the summer and I can bundle my head with caps and hoods easier in the winter.

If I find any issues after hunting I will report back.

 

 

 

 

3

Can you post a link to the company or supplier you purchased from?

I can't find a supplier with less than a 100 piece minimum order!

Link to comment
Share on other sites

1 hour ago, SittingElf said:

Can you post a link to the company or supplier you purchased from?

I can't find a supplier with less than a 100 piece minimum order!

I found the exact same problem.  There does not yet seem to be a retailer carrying them.

That is why I got my sample directly from the factory.

Link to comment
Share on other sites

  • 2 months later...
  • 8 months later...

well i ordered some tronds  for my equinox 600 paired ok but all they did was crackle  really bad    and also could not get any other phones  which i had to pair with my 600 which was only a week old  so took it back and tried the phones on another 600  and they  were the same paired but just crackle noise  and my other  bluetooth phones would not pair with the shop 600 ether  so ended up getting  minelab phones which paired  quick and no crackle  even tried  the lads across the road his £200 beats  paired ok but no sound  just a very faint crackle noise   could be heard so any more info on the tronds and how you got them to work i would really like to know 

thanks  andy 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...