Jump to content

Recommended Posts

Hi All,

I'm new to detecting and this group. Have only been out a few times myself looking for coins/relics/jewellery etc. I'm a bit of a shed tinkerer and decided to knock up some picks from old leaf springs from a LandCruiser. Made two different sizes. One for my older son and one for my girl. Thought I would share them with you guys. I was pretty stocked with them!

Cheers

PS. They do not look like this anymore... I didn't want to get them dirty at first. They were almost mounted on the wall! hahaha

IMG_0187.jpg

IMG_0188.JPG

IMG_0189.jpg

IMG_0193.jpg

  • Like 8
Link to post
Share on other sites

Heavy duty Westy. Welcome to the forum  👍

Link to post
Share on other sites

They look nicely made mate but you ground the angle on the scraper end on the wrong side. It should be the top side not the underneath. The tips too will want angling on the top side too. Makes digging and scraping so much easier. Google up a walco and you'll see what I mean. 

  • Like 1
Link to post
Share on other sites

Thanks Busho,

Yeah I was tossing up on which side to grind the bevel while holding the flappy disk grinder in my hand. Ended up choosing the non-standard side (won't say wrong side because they still work a treat). Lesson learnt for the next round of picks.

I haven't tackled any really hard earth yet so the tip as is is working fine. I'll have to bevel it before heading to any rocky areas. 

Slowly building my faith in them as I swing harder and harder... 

Link to post
Share on other sites

Man, I really need to learn welding.  Great job!

Link to post
Share on other sites

Cheers all,

I did consider knocking a few of them together and seeing if I can sell them. Bit hard to sell them to you guys being spread all over the world!!! 

I'll test them out for a while on some harder earth and see how they go. I need to have some confidence in them before handing them off to people to use. My kids did attempt to dig a hole in some concrete at one point although a 6yo swing is a bit different to a grown man swing!

Link to post
Share on other sites

They look really good, well done... I prefer a wider scraper on my picks, you may want to consider going wider on the next model 🙂

 

  • Like 1
Link to post
Share on other sites

I did consider this in the original builds phrunt. Ended up against the idea due to the additional straight welds required when using 70mm LandCruiser leafs. 

I have a heavy diesel mechanic mate who might be able to get me some wider truck leafs. May need to do some upper body strength conditioning to swing them haha

Link to post
Share on other sites

Could you just use lighter steel for the scoop blade welded onto the leaf spring, leaf spring provides the support. You aren't really bashing anything with that end. (Disclaimer: I know nothing about prospecting picks)

  • Haha 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By ColonelDan
      On 9 August, I posted my initial impression of Steve Goss’ latest offering---carbon fiber scoop handles for the T-Rex, Stealth and X-treme series of sand scoops.
      I’ve been using his product exclusively now for over a month and thought I’d submit a few follow up thoughts. Bottom line up front: Does his handle still impress me as it did when I first got it? ABSOLUTELY.
      A few descriptive words/phrases come to mind when evaluating this handle after many beach outings:
      Stout: This handle is indeed worthy of the term. It leaves no doubt that what you have in your hand is a very stout piece of carbon fiber. There isn’t one hint of flex or weakness in this thing.
      Reliable: I’m more than certain Steve’s handle will serve me well for years to come.
      Professional construction: Steve’s handle is not your big box store, mass produced item. This man takes pride in what he makes and each one reflects his strict attention to detail.
      Conclusion: I’m even more impressed now than I was when I first posted my initial report. If you decide you’d like a top notch carbon fiber handle, you can buy this with the utmost confidence that you’re getting the best I’ve seen since I bought my first detector in 1970.
      Again, I have no financial interest in Steve’s business. I’m just passing along my personal opinion.
    • By Allen in MT
      I made this video a few years ago as I always had people wanting to know about prospecting and what to use. So here it is.
       
    • By jimpugh
      Old magnetron magnets good holding shopping list on fridge and keeping rare iron in the bottom of your scoop for easy retrieval....
      Happy Trails
      jimpugh
    • By Aaron
      I’ve had a lot of questions regarding my Sun Spot water scoop so I thought I’d do a quick video. Thanks!
      Aaron
       
    • By JohnnyRox
      New scoop from RTG.  Anyone using one yet?
       

       

       
    • By ColonelDan
      I got my hands on a new product from Steve’s Detector Rods--a scoop handle for my Stealth 920!
      As we all know, Steve has a well earned and most deserved reputation for giving us top quality shafts for a variety of metal detectors and now he’s dedicated that same level of attention to producing carbon fiber handles for the Stealth, X-treme and T-Rex scoops. It really is a great day for the detecting world.
      As soon as I opened the box, that professional manufacturing and precise attention to detail was clearly evident. You can just tell it’s first class when you see and hold it. The feel of this handle immediately tells you it’s ready for anything you can throw at it. The look of it tells you this is a professional piece of equipment...it’s simply a great looking handle.

      I took it to New Smyrna Beach, Florida for its 3 day maiden voyage and the bottom line: It proved itself to be a real beast...but a very light beast! There was absolutely no flex in this handle even when pulling out a 920 scoop full of very wet sand. This handle felt and performed like the extremely substantial shaft that it was designed to be and there were no exceptions regardless of the various conditions under which I used it.
      Fit, finish and texture: Like all his other shafts, Steve’s scoop handle is a work of art. The carbon fiber is top quality and the finish is truly professional in every way. The top cap is a perfect fit with no sign of twisting...no matter how hard I tried and the handle at the business end slipped perfectly into the 920s tube. It has a shark skin texture that ensures a firm solid grip regardless of how wet it was.
      Specifications: Overall length is right at 46.5 inches; the wall thickness is an impressive 2.5mm; the diameter of the handle is 35mm except at the point it slides into the scoop tube where it’s shaved down to 34.7mm. The weight is a scant 23.73 ozs (1.48 lbs). Even the bolt washer Steve uses to attach the end of the handle to the scoop is larger and thicker than others I’ve used measuring 1.25 inches by 0.050 inches! Simply put, Steve has built this thing for the long haul and the tough going with no detail being overlooked.
      Wet sand or dry, shells or surf, I found it’s all the same to this handle...tough as steel yet light as anything. It makes your scoop sing and a real pleasure to use.
      My “go to” set up is now 100% Steve Goss--both of my EQX shafts and 920 scoop handle are his creations. In summary, I’m convinced that I have the best of the best.
      Finally, rest assured that I have absolutely no financial interest in Steve’s business. My sole purpose is to simply share my views on what I consider great equipment. Another superb job by Steve Goss.
      Note: The two vertical grips shown in the photos are not part of Steve’s handle--I added those.
       
      www.stevesdetectorrods.com
      www.facebook.com/stevesdetectorrods
       
       

×
×
  • Create New...