Chase Goldman Posted June 1, 2020 Share Posted June 1, 2020 I suppose that the APTX people would not be putting out incorrect information while at the same time trying to market their product. But I found the above chart to be in conflict with the one posted below. Specifically, if I read the above chart correctly, the time lag on APTX would range from 40 ms to 80 ms. But the chart below which was posted a couple of years back on the Equinox forum (I've included the link here btw) shows APTX from 60 ms to 80 ms (vs. 40 to 80 ms) and APTX-LL 30 - 40 ms. That extra 20 ms can make a huge difference. Presuming your are leisurely swinging the coil over 3 times its width over a target centered in the middle and it takes about .8 second to traverse that distance of say 3 feet. Then .070 seconds delay (70 ms average aptx delay) = 36 inches/.8 sec * (70/1000) sec is ~ 3 inches. In other words, your coil has traversed about 3 inches over the time it has taken to hit the target with coil until it actually reaches your ear. At APTX-ll average delays of 30 ms, that distance has narrowed to 1.3 inches. Not ideal, but better. SBC (regular bluetooth) is 220 ms and it is just unbearable with a swing error of almost 10 inches! Basically, every 20 ms delay results in a swing error of about 1 inch and gets worse the faster you swing the coil. Regular SBC bluetooth delay is unusable. APTX I have found to be annoying but if I had no other choice could deal with it. APTX-LL is pretty indistinguishable from real time from my experience. Minelab Wi-Stream proprietary wireless protocol delay is about 16 ms which I suppose is similar to Garrett's Z-Lynk wireless performance. Let us know how it goes with those APTX buds, Rick. Would like to know if they do better than the ones I have tested. Thanks! Link to comment Share on other sites More sharing options...
Rick Posted June 4, 2020 Author Share Posted June 4, 2020 I finally received everything charged all took everything outside threw a silver ring and a gold ring in the grass I went over them with the wireless and without , I can not tell the difference........So for me the AptX-Low latency TX and the AptX buds are working together.....At least for me. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now