Jump to content
Website Rollback - Latest Updates ×

Minelab GPX 6000 Full Reveal In February 2021?


Recommended Posts

If this 6000 is in a slightly slimmed down GPZ style case, uses regular mono loops, and has a smaller battery than the GPZ then those factors alone should get it to 5lbs from the GPZs 7.2lbs I would think. I wonder if the shaft might be lighter too as it need not be as large diameter if it isn't accommodating an inner cable or a large mounting knuckle. 

JANUARY 2021 UPDATE - Minelab GPX 6000 Revealed!

I suppose its futile to ask at this stage when things are so mum still, but i might as well try...JP can you say whether you field tested this machine or not yet? Or if we will get public field test reports as we did prior to the GPZ release?

  • Like 1
Link to comment
Share on other sites


I have another question besides the weight issue and ergonomics.  Will this machine find 'invisible' nuggets on existing patches?  We 'assume' that most if not all of the gold has been found on many patches these days.  We also know that no one gets it all.  The 5000 was designed to be more quiet relative to the ground and you could pick your coil for coverage and depth.  It succeeded for many in that regard and new nuggets were found.  The GPZ came out with the 40% deeper advertising and it proved with its ZVT to pull out some pretty nice nuggets from hammered patches that were previously invisible.  Minelab has many different other gold detectors such as the 2300, Gold Monster, Equinox 800 that will find tiny shallow nuggets missed and invisible in these same patches.  That does not make the gold taken off of these patches return.  I can now go back to some of our patches and not find any nuggets with an array of these detectors and coils or find so few that it is time to move on.

How will this 6000 fare on finding the invisible nugget?  Will it see specimens as its claim to fame?  Will it have a better audio enhancement on 'good' targets?  Will it make my 18" NF coil do back flips and make my most productive coil ever get put back on a detector?  If it does not fare well then will it be the cat's meow at helping someone find new patches which are getting harder and harder to find with good research.

What in the 'sales proposition' will be offered to make me part with one of my other detectors, money or both?

  • Like 4
Link to comment
Share on other sites

  ?????? Wish.thumb.jpg.e1dce9eef5a1a2b6e34e7b6ab8b3dd17.jpg

Features:

It is universal and very easy to use.

Two modes of operation,all metal mode, recognition mode.

Adjust the speaker and headphone volume for volume adjustment. Adjustable rod,you can adjust the length.

Waterproof probe which can use metal detectors in shallow water.

Through your detector, everywhere you can explore the coins, jewelry, gold and silver.

Description:

Perfect search engine on the beach, old castles, old battlegrounds, forests and fields and farmlands.

Professional metal detector that can be used to locate valuable metal such as silver and gold from iron relics, coins and household items.

It is also suitable for high speed cable detecting in walls, ceilings and floors, with both electrical and water pipes can be located precisely.

Specification:

Model: MD4030 Color: Black

Item Size: 550*230*85mm Power: 2 9V x (6F22) Frequency: 5KHz

Current: static: 10mA Max: 70mA

Voltage: 7.2-9.6V

Sensitivity: US 25 Cent: 130mm

Display Mode: mechanical pointer mode Expansion length: 30.7-42.1 inches Detecting disk diameter: 6.5 inches

Model: MD3010 Material: plastic Color: yellow Size: 43*13*20CM Description:

Battery: 6*AA laminated cell(NOT included) Current: standby~65mA MAX ~150mA Operating voltage: 7.1 ~ 9.6V

Signal frequency: 7.5KHz+/-1KHz Working environment: -20 ~ 60¡æ Depth of detection: 1-1.5M

??????

 

 

  • Like 1
  • Haha 1
  • Thanks 1
Link to comment
Share on other sites

There is a Free Trade Agreement between Australia and USA so if the AQ is being made in the USA  no import duty would apply just the normal 10% GST (Goods and Services Tax) which also applies to Minelab products. Any price differences between USA and Australia for non Minelab products is usually down to small volumes being sold through a small distributor who has larger margins than their US counterparts in order to survive. Based on my observations I would guess 80% + of the market in Australia is Minelab.

If Fisher Labs want to keep the price down in Australia and gain some market share they should allow direct individual/personal imports from a large USA distributor.

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

It looks Minelab requested a delay in the release of the user manual and test photos until Dec 18, 2020 -  "ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices"

So maybe an October release is a little early. 

I don't want to direct link a .pdf, so here is the website with the request for revised confidentiality letter from which I quoted above. Minelab sent that letter the day after the FCC material was posted here on the forum, wonder if they read this and went "oops"...

Link to comment
Share on other sites

On 8/16/2020 at 5:53 AM, Steve Herschbach said:

The article at the link set a low bar at 4 lbs and US$2000 but my internal limit is more like “no more than 5 lbs, no more than $3000

G'day Steve, would the QEDs meet your criteria? I've been looking for a cheap but reliable PI detector since I've moved further afield from Magnetic Island.. for the past month I've been looking in the catchments of the Closhey River, Barron River, Musgrave River and Davies Creek in Northern Queensland.. I based my searches on the location of known gold mines..

I'm ready to make the big leap from my Equinox 600 and Chinese Gold Bug Pro, both of which indicated gold in one small patch along the Barron River (the Nox consistently read 01 to 02 and the GBP 39-40-41).. my son panned the soil that i dug up (we couldn't see anything by eye) and he got two tiny little flakes.. I don't have any photos to prove this, you only have my word.. the truth is that we lost the bloody things on the way back.. we didn't have anything to put such little pieces in so he knotted them in the corner of his shirt.. I changed his mind about this halfway back down the river and told him to carry them in his mouth.. in the confusion he lost the only pieces of gold I've had a hand in finding.. but at least now we know where to take a PI detector.. 

Anyway back to the point, I've heard quite a bit about how good QED detectors are on hot ground, which all these river catchments were.. Are they as widely used in the USA? Can you form an opinion about these detectors one way or another? Thanks for your advice..    

  • Like 1
Link to comment
Share on other sites

9 hours ago, Erik Oostra said:

G'day Steve, would the QEDs meet your criteria?

Anyway back to the point, I've heard quite a bit about how good QED detectors are on hot ground, which all these river catchments were.. Are they as widely used in the USA? Can you form an opinion about these detectors one way or another? Thanks for your advice..    

I do get into it all including the QED in the aforementioned thread on inexpensive PI detectors. The only reason I don’t have a QED is they have no U.S. dealers or service. My opinion about the machine is based on every forum QED post. You can read them also and come to your own conclusions. It appears to be a very decent detector at a great price. Maybe a couple quirks, but all machines have those. It honestly has been a sort of work in progress moving target for several years, so partly I have been waiting for the design to settle down. While I’ve done that, other detectors that do have U.S. service and support have come into view, and I decided to wait preferentially on those. I have an Impulse AQ right now and like what I’m seeing, so I’m more than happy to wait and see what the nugget version does. And now with the GPX 6000 right around the corner... I’d sure want to know what it sells for before going with anything else. I’m hoping the AUS$8000 is not correct and that it ends up selling for less. If not, I’m pretty sure the Impulse Gold is going to fill the bill for me. If not either of those... there is the QED. :smile:

  • Like 6
Link to comment
Share on other sites

 

Taken from todays Codan (Minelab) stock exchange report for financial year ending 30th june 2020. Im assuming they are referring to the GPX6000.

"DuringFY21, Minelab will introduce a new gold detector, which will include the best features from both the SDC 2300®and GPX platforms"

So FY21 ends 30th June 2021 therefore we can expect product launch before 30th June. My guess is March 2021 - just before everyone heads over to Western Australian gold fields for the cooler months.

Best Feature of SDC - very robust, deadly on small gold, compact, water proof.

Best Feature of GPX - very stable in high mineral soils, can easily swap with wide range of coils to suit conditions, easy to swing.

Add blue tooth headphones (and maybe some new Geo Sense -PI (what ever that is)) and presto you have the GPX 6000. 

 

  • Like 2
Link to comment
Share on other sites

Maybe they have worked out the coil water proofing - add a high salt / beach mode and you have a competitor to FL  AQ.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...