George Kinsey Posted January 6, 2023 Share Posted January 6, 2023 Seems like everyone will never ground balance in the videos. My hot soil will actually get rid of small iron during the GB process. I have also noticed on many videos that ground mineral noise is mistaken for actual iron targets. Just some thoughts. What say you. 2 Link to comment Share on other sites More sharing options...
Digalicious Posted January 6, 2023 Share Posted January 6, 2023 I always ground balance, no matter how mild I think the soil is. What I always shake my head at in a lot of those videos, is when they ground balance without checking that there aren't targets under the coil. 2 Link to comment Share on other sites More sharing options...
longbow62 Posted January 6, 2023 Share Posted January 6, 2023 I've always thought it was best to ground balance myself. I always thought keeping the Equinox on zero was a mistake. The further away from zero your detector balances the more it matters in my opinion. I have from single digit to mid 50's ground balance numbers with the soils where I live. 3 Link to comment Share on other sites More sharing options...
scoopjohnb Posted January 6, 2023 Share Posted January 6, 2023 Getting to know and trust a detector takes a little longer than the unboxing video and quick start they run us through in these early days. I know a few detectors I’ve owned that let me know with the iron falsing that the GB was off. These machines I came to trust and they pulled some really nice targets out of the ground. It’s those machines that run silent nearly all the time you really have to watch out for. They are engineered not to annoy and lack depth with hair splitting discrimination. I like a good ground balance channel. 4 Link to comment Share on other sites More sharing options...
Cliff490 Posted January 6, 2023 Share Posted January 6, 2023 A lot of the places I hunt I cant find a clean spot to ground balance over. 3 Link to comment Share on other sites More sharing options...
Digalicious Posted January 6, 2023 Share Posted January 6, 2023 7 minutes ago, Cliff490 said: A lot of the places I hunt I cant find a clean spot to ground balance over. Use that weird detector thing in your hand and clear out a small area just a bit larger than the coil, then ground balance over that ? 6 2 Link to comment Share on other sites More sharing options...
midalake Posted January 7, 2023 Share Posted January 7, 2023 All of my salt beach hunting is done in Tracking Ground Balance. 5 Link to comment Share on other sites More sharing options...
F350Platinum Posted January 7, 2023 Share Posted January 7, 2023 11 hours ago, Cliff490 said: A lot of the places I hunt I cant find a clean spot to ground balance over. Chase mentioned another method in a trashy area, use the pinpoint function to find a spot where there's nothing, and ground balance there. You have to be a little more precise when pumping the detector but it works. 5 Link to comment Share on other sites More sharing options...
Ringtail Posted January 7, 2023 Share Posted January 7, 2023 2 hours ago, F350Platinum said: Chase mentioned another method in a trashy area, use the pinpoint function to find a spot where there's nothing, and ground balance there. You have to be a little more precise when pumping the detector but it works. This is the method I have always used. I also always ground balance manually and frequently. I suspect that in an area with lots of iron trash auto ground balance will drift away from the correct ground balance. I also think that auto ground balance drifts when you spend extra time investigating an iffy target causing changes in discrimination and sensitivity. These are just my opinions based on years of using a V3i then an Equinox 800. Maybe auto ground balance is better than I thought, and hopefully it is much improved in the Manticore. I would be very interested in hearing from the experts. Ringtail 5 Link to comment Share on other sites More sharing options...
strick Posted January 7, 2023 Share Posted January 7, 2023 On 1/6/2023 at 4:58 AM, George Kinsey said: I have also noticed on many videos that ground mineral noise is mistaken for actual iron targets. Just some thoughts. What say you. This 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now