Impulse AQ In Surf / 36 Psu Salinity

[deborah195412]

As far as hunting wet sand it does fine with both the old coil and the new coil. I will ttry next time in the water I'll test it with only the coil in the water.

 

 

[dewcon4414]

Alexandre.... I was simply pointing  out Tom is here where the ... alleged problem is.  Yes he did do the testing with Carl.... but my understanding is this is a far better machine.  He’s an worked with Fisher for years.  I was attempting to be constructive since several would like to have this machine her.  I’m sure you will work it out. I apologize for stepping on you toes.

[Willy]

1 minute ago, Rick Kempf said:

Just for clarity - Alexandre, when you write “when only the new searchcoil is in the water” do you mean when the coil is submerged, but the control box and coil connector are not - 

YES, just the coil.

[ALEXANDRE TARTAR]

2 minutes ago, dewcon4414 said:

Alexandre.... I was simply pointing  out Tom is here where the ... alleged problem is.  Yes he did do the testing with Carl.... but my understanding is this is a far better machine.  He’s an worked with Fisher for years.  I was attempting to be constructive since several would like to have this machine her.  I’m sure you will work it out. I apologize for stepping on you toes.

No problem

[jimpugh]

Meci beaucoup

tu es très gentil

[Carolina]

3 hours ago, ALEXANDRE TARTAR said:

Thank you for your positive, constructive and very spiritually enriching message. 

We were eagerly awaiting your comment. 

Do not hesitate in the future...

I believe that Mr Dankowski had the opportunity to test the first version with Carl Moreland.

And he said this is the 2nd best PI detector for the beach he had ever had.

According to him, the first was the Aquastar, which I had for years with retro engineering at the time (just for fun), and which has no ground adjustment, and is at least 40% in below the sensitivity of the IMPULSE AQ on all of our tests.

Nostalgia sometimes obscures reality, but I think any good prospector reacts that way ...

[Joe Beechnut OBN]

14 hours ago, ALEXANDRE TARTAR said:

If this phenomenon only happens when the detector is completely in water, the diagnosis is not the same as if it also appears as in the video.

What happens when you are not in neck deep water? Have you the same result as the video?

For those that are having issues, make sure the connector is full seated. Almost has a snap in place..... feel as your turning the Lock Shell.

Researching question and Off subject question....Is the Souriau connector for the coil the ..... UTS1JC142G1P ...or the UTS1JC103P or am I off on those..........Thank You Alexandrea and Willy..

[ALEXANDRE TARTAR]

3 hours ago, Joe Beechnut OBN said:

For those that are having issues, make sure the connector is full seated. Almost has a snap in place..... feel as your turning the Lock Shell.

Researching question and Off subject question....Is the Souriau connector for the coil the ..... UTS1JC142G1P ...or the UTS1JC103P or am I off on those..........Thank You Alexandrea and Willy..

none of that, it's the one: UTS6JC103P

[Carolina]

3 hours ago, Joe Beechnut OBN said:

For those that are having issues, make sure the connector is full seated. Almost has a snap in place..... feel as your turning the Lock Shell.

Researching question and Off subject question....Is the Souriau connector for the coil the ..... UTS1JC142G1P ...or the UTS1JC103P or am I off on those..........Thank You Alexandrea and Willy..

Joe because of the wear on the nibs we both know occurs over time, I always push in with pressure the connector as I rotate the bayonet style locking ring clockwise until it stops dead. This prevents the nibs from pulling the connector in to seat it therefore helping stop the wear and eventually a loose connector. Just for those who have no experience with the Souriau connectors. The VALLON PI also uses them but in a metal version.