Comrade Posted November 25, 2015 Share Posted November 25, 2015 Hi,guys! I want to receive an expert advice. I’ve got some old electronic equipment (of Cold War times, came from USSR) and want to remove gold from the contacts. What can you say about this equipment http://www.ishor.com/refining-and-recovery/refining-systems-processes Is it worth the money? What kind of equipment you can recomend? Link to comment Share on other sites More sharing options...
tvanwho Posted November 25, 2015 Share Posted November 25, 2015 It involves using some nasty chemicals with nasty fumes.I was going to strip gold off PC circuit board fingers and chip pins some years back but decided I didn't want these nasty chemicals/acids in my house. The fumes alone could hurt you bad and we don't want govt types to come snooping around investigating strange odors and chemistry sets. Aqua regia was one of the nasty solutions as I recall. I'd say to sell the electronic scrap on Ebay instead and stay safe at home... Link to comment Share on other sites More sharing options...
Steve Herschbach Posted November 26, 2015 Share Posted November 26, 2015 So Comrade, by chance are you in the SEO business trying to boost traffic by creating links? There is usually another name for that related to sandwich meat in a can. You fit the pattern first time poster and all. Normally you just get banned as has happened to you on other forums but for once the link was actually close to being on topic and some interesting information there so I am letting it go. Now I am just curious to see if you answer or this was just a drive by post on your part. 1 Link to comment Share on other sites More sharing options...
Sourdough Scott Posted November 26, 2015 Share Posted November 26, 2015 I used the shor refining system years ago. I used the saltwater electrolysis with the battery charger. It did work. But spendy. Link to comment Share on other sites More sharing options...
KS Stick Posted November 26, 2015 Share Posted November 26, 2015 I have not tried this yet But heard of a fellow busting up electronics and putting them in a small cement mixer until they are ground up then panning the remains. Don't know if it works but it shows what some folks will try. Link to comment Share on other sites More sharing options...
Reno Chris Posted November 26, 2015 Share Posted November 26, 2015 The Shor stuff is way, way too expensive. You can do the same with home made stuff and a few things bought at Home Depot or similar places for literally few pennies on the dollar of the same would cost from shor. They hide the names of the chemicals so you wont go out and buy it elsewhere for cheap. Normally, recovering scrap gold is a lot of work for a few grams unless you have easy access to loads of electronics stuff. I was given a few pounds of old, gold plated military contact pins, and after fiddling with it for a while, I ended up with nearly half an ounce of gold. That's highly unusual. A pound of close trimmed computer card edges (where they fit into a slot and are gold plated) will yield roughly a pennyweight of gold - and that's the edges only not the whole card. 1 Link to comment Share on other sites More sharing options...
vanursepaul Posted November 26, 2015 Share Posted November 26, 2015 Sounds like me metal detecting...lol Link to comment Share on other sites More sharing options...
mn90403 Posted November 26, 2015 Share Posted November 26, 2015 Steve, I think you are right. Anyone with electronic 'scrap' should take it to an authorized recycling center and be paid by the pound for it. They handle all the knocking the fingers off and board scrap. They will even take all the old tubes with lead and other hazards. It doesn't just go to China any more. That is what I did with my computer scrap as a business for 10 years. Mitchel Link to comment Share on other sites More sharing options...
Comrade Posted November 26, 2015 Author Share Posted November 26, 2015 So Comrade, by chance are you in the SEO business trying to boost traffic by creating links? There is usually another name for that related to sandwich meat in a can. You fit the pattern first time poster and all. Normally you just get banned as has happened to you on other forums but for once the link was actually close to being on topic and some interesting information there so I am letting it go. Now I am just curious to see if you answer or this was just a drive by post on your part. Hi Steve, You are semi-right My job is related to online marketing, but not for ishor. In this case I really found access to some scrap and want some gold from it, and looking if this worth or not to invest in to it. Reno, Sourdough and others who reply - thank you! 1 Link to comment Share on other sites More sharing options...
Steve Herschbach Posted November 26, 2015 Share Posted November 26, 2015 Good for you on responding Comrade. Welcome to the forum, despite my earlier less than warm welcome! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now