Popular Post Rob Allison Posted January 17, 2021 Popular Post Share Posted January 17, 2021 Hello All, Had a great time testing the new Nugget Finder "Z Search" Searchcoil today on a wash I haven't hunted in some time. This small coil for the GPZ 7000 is much lighter, more sensitive and easier to pinpoint small targets with. I was super impressed with the new coil, wish I had a few dozen in stock. I also love the fact you don't have to modify anything, just mount and plug in like a stock GPZ coil. I have already had 3 customers burn up their $8000 GPZ 7000 by making some wiring mistakes on adapters for aftermarket coils. In my opinion, I don't recommend anyone voiding a warranty or sacrificing a $8000 metal detector if you make a mistake. Pictured below are nuggets found today with the new coil here in Arizona. The coil comes with a lower shaft, mounting hardware and skidplate. 20 Link to comment Share on other sites More sharing options...
flakmagnet Posted January 17, 2021 Share Posted January 17, 2021 (smiling) 1 Link to comment Share on other sites More sharing options...
vanursepaul Posted January 17, 2021 Share Posted January 17, 2021 I know of two ... both were the same man... well documented on the forum when it happened.... no big deal... people will decide which they want to buy... let the coils speak for themselves with performance... 6000 will end all this ? 2 3 Link to comment Share on other sites More sharing options...
mn90403 Posted January 17, 2021 Share Posted January 17, 2021 1 hour ago, vanursepaul said: I know of two ... both were the same man... well documented on the forum when it happened.... Did it take $8000 to fix it? 1 Link to comment Share on other sites More sharing options...
mn90403 Posted January 17, 2021 Share Posted January 17, 2021 4 hours ago, Rob Allison said: Had a great time testing the new Nugget Finder "Z Search" Searchcoil today on a wash I haven't hunted in some time. This small coil for the GPZ 7000 is much lighter, more sensitive and easier to pinpoint small targets with. I was super impressed with the new coil, wish I had a few dozen in stock. Rob, That is a lot of nuggets in a day for any coil. Good for you and good luck with whatever you are swinging. I've had good luck with Nugget Finder coils in the past and these will be good to add to the alternate coils available for the Zed. Mitchel 2 Link to comment Share on other sites More sharing options...
Rob Allison Posted January 17, 2021 Author Share Posted January 17, 2021 Hey Guys, For the people, Yes and I'm not going to say names or exact numbers. I have been a dealer for almost 25 years, so there are customers that had units burn up, had to purchase completely new detectors were purchased. As you see, there is already a friend and forum member that stated one person had two units burn up. Please keep in mind, I can't speak for someone else, just know there were issues/damages from modifications. These were not faulty coils, but rather a "modification process" that allows you to use a aftermarket Minelab coil on a Minelab metal detector. I just want to make sure that is "crystal clear." Minelab will not warranty, nor fix/repair a burned up GPZ related to a modification or tampering. The only coils endorsed by Minelab at this point are Coiltek. I can't speak for how a person does the work, wires it, or whatever the issue(s) might have been. These coils are probably great, I had a handful of opportunities, even from the designer to test a few. I didn't find the value at that time, with a smaller coil to see that much performance difference (risk vs. reward). I decided I was finding enough gold with the 14x13 that I didn't really need to risk any potential damage, so I waited it out for another Minelab coil or a coil that was 100% endorsed and backed by Minelab. After over 4 years with the Minelab GPZ 7000 and stock coil, I found this new NF Z Search coil a pleasure to use. Its lighter, more sensitive, well built and plugs right in. It also includes all the hardware and lower GPZ Shaft. Furthermore, I just want to plug a coil in and go play. I don't want to tinker or modify. Rob 9 Link to comment Share on other sites More sharing options...
vanursepaul Posted January 17, 2021 Share Posted January 17, 2021 11 hours ago, mn90403 said: Did it take $8000 to fix it? I have no idea what it cost to get them up and running or replaced...but you could pm him... I know there was a lot of very frustrating downtime while in OZ trying to get on the gold with no ZED. A premade connector makes a lot of sense, right? 1 Link to comment Share on other sites More sharing options...
jasong Posted January 17, 2021 Share Posted January 17, 2021 10 minutes ago, Rob Allison said: The only coils endorsed by Minelab at this point are Coiltek. ... I decided I was finding enough gold with the 14x13 that I didn't really need to risk any potential damage, so I waited it out for another Minelab coil or a coil that was 100% endorsed and backed by Minelab. Rob, are you saying Coiltek is helping making the NF coils? I'm not sure I understand how Coiltek can be the only coil endorsed by Minelab but the NF coil is also 100% endorsed by Minelab? Link to comment Share on other sites More sharing options...
Popular Post Rob Allison Posted January 17, 2021 Author Popular Post Share Posted January 17, 2021 Hey Dave and Phrunt, I appreciate your comments. However, my business ethics over the years don't have to be explained, I think all my customers would say I have been upfront, honest and gave them the best service and advice any dealer could give. That being said, I'm not sure about your selling techniques, or if you even sale. When anyone calls and tells me they damaged a $8000 metal detector due to a modification error/issue, then it's only fair for me to tell anyone out there to be careful and make sure it's worth the potential risk. I have never told anyone not to inquiry, test or purchase any product or coil, just make sure you do enough research. I'm not sure either of you called Minelab and tried to satisfy the customer, but I did. I did everything in my power to have Minelab work with the customer(s) to see what type of options they have (if any). On another note, I had to make a small correction on my original post. I posted "that the new Z Search" coil was endorsed by Minelab" and I was told today, this is not correct by Minelab. I'm going to follow up with Minelab Americas/Australia to find out. This is a question someone might ask. It's my understanding today, the only Searchcoils endorsed by Minelab are Coiltek Manufacturing. P.S. As for the pinpointing issue, it's more about time then true issues of finding the target. Lets just make it easy, the smaller coil makes it easier to pinpoint more precise and less time recovering nuggets that are grains in size, not sub-grams, or grams. Rob 10 Link to comment Share on other sites More sharing options...
Rob Allison Posted January 17, 2021 Author Share Posted January 17, 2021 Hey Jasong, I just got off the phone with my rep to clarify. It was my understanding and I just make the correction and posted above about it, that Coiltek right now is the only manufacture endorsed by Minelab. I mis-heard that NF was also endorsed on this new coil, but I was wrong as of now. My rep is going to inquire more from Minelab Australia, but as of now, Coiltek is the only manufacture that is endorsed by Minelab. This does not mean any other manufacture such as Nugget Finder, X-Coils, Detacc, NEL or whomever don't make great products. I guess it's more of being backed by Minelab, more of maybe a safe guard to a customer. Rob 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now