NCtoad Posted March 24, 2021 Share Posted March 24, 2021 I have one of the first runs of the equinox. Got on a wait list with a dealer and got mine in April or May of 2018 (please correct me if I’m wrong on this, but I think I’ve had my nox for 3 years now). I had a slight case of the shaft wobble issue and ended up getting an Anderson carbon fiber upper and lower rods. When Steve first came out with his rods I inquired about getting just the upper from him mostly for the cam lock, but also for the balance pod. We sent some messages back and forth and realized that the Anderson lower rod was a slightly larger diameter and wasn’t compatible with Steve’s upper rod. Since I had just shelled out $150 on the Anderson I decided I would make my own balance pod. I had some 6/6 nylon rod and had this big piece of aluminum left over from another project. You can see from the pic how it works. The aluminum counter weight can be slid closer or farther from the fulcrum point (the equinox control box grip) to fine tune the balance. I forget what the nylon rod and counter weight weighs, but even with the counter weight slid all the way to the end, it still doesn’t perfectly balance the 11” coil, however it’s nearly perfect for the 6” coil. I wanted the overall weight of the detector as light as possible, but still help significantly with the balance. I think I got it at a fairly sweet spot between balance and overall weight. 7 Link to comment Share on other sites More sharing options...
FloridaSon Posted March 24, 2021 Share Posted March 24, 2021 Great idea! I have seen others velcro a water bottle holder on. Pint will be 2# or yo can adjust the amount of water. I have a Steve Pod and it works great! Great invention. Link to comment Share on other sites More sharing options...
Joe D. Posted March 24, 2021 Share Posted March 24, 2021 Not to downplay Steve G's great shafts and balance system, they are awsome! But I have a soft spot for diy fixes! Good job!!?? 1 Link to comment Share on other sites More sharing options...
Popular Post Tom Slick Posted March 24, 2021 Popular Post Share Posted March 24, 2021 Here's mine. Snap on what ever size socket you want. The socket pictured weighs 16 oz. I don't use it as I like the way my "S" rod mod. swings. 11 Link to comment Share on other sites More sharing options...
Joe D. Posted March 25, 2021 Share Posted March 25, 2021 Great idea Tom, And you have a very nice back yard!?? 1 Link to comment Share on other sites More sharing options...
F350Platinum Posted March 25, 2021 Share Posted March 25, 2021 13 hours ago, Tom Slick said: Here's mine. Snap on what ever size socket you want. The socket pictured weighs 16 oz. I don't use it as I like the way my "S" rod mod. swings. Brilliant! If you need more weight and have a beat up socket you could fill it with lead. I second your great backyard and lawn. ? 1 Link to comment Share on other sites More sharing options...
steveg Posted March 25, 2021 Share Posted March 25, 2021 Nice mods, guys! Steve 1 Link to comment Share on other sites More sharing options...
relicmeister Posted March 26, 2021 Share Posted March 26, 2021 I switched from adding weight to a bungee tether attached to the arm cuff strap. It seems to pull the coil directly up the axis of the shaft as compared to attaching it to the handle. But alternatively I have a weight that can be pressed into the shaft end, but I prefer not adding weight. 1 Link to comment Share on other sites More sharing options...
Badger-NH Posted March 26, 2021 Share Posted March 26, 2021 I made a really nice counter balance weight with a piece of carbon tube and some lead. It looked just as good as the one that you can buy. The trade off is yes the balance is better but now the detector is heavier. It just replaced one problem with another problem. If I had the big coil, I would go the bungee route like I did with my Explorer. The best material to use for the cord is surgical tubing which they sell at Home Depot and other stores. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now