Voyager32 Posted March 27, 2018 Share Posted March 27, 2018 Looking at the chart it appears that modern Canadian coins would be discriminated out like a nail or screw, what would be the best setting for these? Any Canadian Equinox hunters out there? I’m a retired complete newbie with a 600 looking for any tips to help me along. Also plan to do some snorkeling in lakes and ocean. Thanks Link to comment https://www.detectorprospector.com/topic/6022-canadian-vdi-numbers/ Share on other sites More sharing options...
canslawhero Posted March 27, 2018 Share Posted March 27, 2018 simply not the right machine if you want to dig Cdn clad. I've had mine for a while now and have only found a few of the earlier 'nickel' based clad coins, some by accident, ie co-located with a copper penny. if you really want to try to ID them then hit the horseshoe button and experiment with where they show up in the ferrous T1 area. I believe the nickel coins bounce around 16-17 or there-a-bout.... sorry I can't help more but I use a dedicated machine for clad....cheers Link to comment https://www.detectorprospector.com/topic/6022-canadian-vdi-numbers/#findComment-63114 Share on other sites More sharing options...
Voyager32 Posted March 28, 2018 Author Share Posted March 28, 2018 1 hour ago, canslawhero said: simply not the right machine if you want to dig Cdn clad. I've had mine for a while now and have only found a few of the earlier 'nickel' based clad coins, some by accident, ie co-located with a copper penny. if you really want to try to ID them then hit the horseshoe button and experiment with where they show up in the ferrous T1 area. I believe the nickel coins bounce around 16-17 or there-a-bout.... sorry I can't help more but I use a dedicated machine for clad....cheers Thanks for the tip. A bit disappointing to have this cutting edge machine with all the different modes and not be able to utilize them. Hopefully beachmode will be fun and not too frustrating. Now for waterproof headphones. Link to comment https://www.detectorprospector.com/topic/6022-canadian-vdi-numbers/#findComment-63119 Share on other sites More sharing options...
canslawhero Posted March 28, 2018 Share Posted March 28, 2018 it is a cutting edge machine for non-ferrous items.....modern Canadian clad is steel core, ferrous.... and the older 'nickel' core coinage has a ferrous component, hence it's being magnetic...bouncy readings... now the deeper, older silver/copper coinage is where it will shine, ask me how I know, lol 1 Link to comment https://www.detectorprospector.com/topic/6022-canadian-vdi-numbers/#findComment-63125 Share on other sites More sharing options...
Tyran Posted March 28, 2018 Share Posted March 28, 2018 Hi Voyager32, I have tested in my backyard in Park 2 and All Metal. The results were pretty well identical in both modes. Coins were buried in 5 to 6 inch plugs. Not entirely the VDI's you would get in an actual dig, of course, but it's likely better than an air test. I am in the Kelowna area of British Columbia. My backyard soil is similar to what I would get in any local parks or schools. Therefore low mineralization. And as you know Canadian coins vary in composition with vintage. I suggest you check on the "Canadian Mint" website for composition vs year of mintage. Here are a few VDI's: Penny:1942-1979: 25; 2000-present: -4 Nickel:1955-1981: 12,14; 1982-2000: 12; 2001-present: 7,11 Dime:1920-1967: 27, 28; 1968-1999: 3; 2000-present: 2,3 Quarter: 1920-1967: 30; 1968-1999: 8; 2000-present: 2 Half Dollar: 1920-1967: 35; 1968-1999: 8 Loonie: 1987-2012: 8; 2013-present: 2 Toonie: 1996-2012: 13: 2013-present: 6 As you can see in my soil, only the "steel" penny (a 2007 penny) is in the Iron zone. Your soil may give you different results. Hope this helps you to get started. Tyran 3 3 Link to comment https://www.detectorprospector.com/topic/6022-canadian-vdi-numbers/#findComment-63138 Share on other sites More sharing options...
Voyager32 Posted March 28, 2018 Author Share Posted March 28, 2018 Tyran Thank you so much! This is just what I was looking for, I’ve done some testing in my backyard with newer coins but the numbers seem all over, but I may be doing something wrong to cause it, noise cancel and auto ground balance then have a go. I’m a 68year old newbie in the sport lol, should be a lot of fun. Thanks again. Link to comment https://www.detectorprospector.com/topic/6022-canadian-vdi-numbers/#findComment-63141 Share on other sites More sharing options...
canslawhero Posted March 28, 2018 Share Posted March 28, 2018 Tyran, big thanks, I was too lazy to do what you did... I'm going to incorporate this info into my park 1 settings and give it a shot today, cheers heck, enough loonies and toonies and it'll pay for itself, lol Link to comment https://www.detectorprospector.com/topic/6022-canadian-vdi-numbers/#findComment-63176 Share on other sites More sharing options...
InTrouble Posted March 30, 2018 Share Posted March 30, 2018 Thanks Tyran, great info will get me up and running a lot sooner. Link to comment https://www.detectorprospector.com/topic/6022-canadian-vdi-numbers/#findComment-63402 Share on other sites More sharing options...
Tyran Posted April 8, 2018 Share Posted April 8, 2018 In the low mineralization of the Kelowna, British Columbia Canada school and park grounds, the modern Canadian coins do not fall in the "Ferrous Zone" as stated in the Manual, but fall in the "Very Low and Low Zones". However, this could change in the rest of the Okanagan Valley as volcanic rocks abound. The older coins with silver and copper composition do fall in the High to Very High Zones, just like the US Coins, other than nickels, of course. 2 Link to comment https://www.detectorprospector.com/topic/6022-canadian-vdi-numbers/#findComment-64703 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now