Steve Herschbach Posted September 9, 2017 Share Posted September 9, 2017 Just curious. Excepting the Deus, which has no coil cable, what are people's thoughts on cable routing? There is the original "wrap around the rod" method. There are also a few detectors that route the cable up the shaft like the Minelab Explorer/E-TRAC/CTX series, the GPZ, Garrett ATX, and Nokta Impact. I am especially interested to hear what people who have used both systems think - pros and cons. I have a few thoughts but don't want to bias the responses so will weigh in later. Link to comment Share on other sites More sharing options...
Ridge Runner Posted September 9, 2017 Share Posted September 9, 2017 Steve I've had the best of both worlds but I do like the internally run cable the most. Now if they being Minelab would make it where I could hookup a after market coil that would make it outstanding. I've yet to get a call from anyone on what I like until your post. Chuck PS That's why I like this forum so much is you make it so interesting. 1 1 Link to comment Share on other sites More sharing options...
fredmason Posted September 9, 2017 Share Posted September 9, 2017 When I got my ctx, I thought the internal wire was a pain...wrong! I especially love the system with my 7000...no wires to hang up on anything-Brilliant! This is way, way better than the wrap around system. fred 1 Link to comment Share on other sites More sharing options...
Norvic Posted September 9, 2017 Share Posted September 9, 2017 The only MDs I`ve had with internal routing of the cable are the Z, CTX and the SDC and to me that beats "wrap around". Rest have all had cables "rap around the rod" with the Deus as you point out Steve has "maybe" the ultimate cable solution......no cable. I think in the recent thread about the Monsters touch sensitivity, the main advantage of internal routing has been illustrated very well. Eastwest got this across to me when he pointed out the Monster is the first MD he has had without internal routing. So yeah for me I`ll go for internal routing the pro being that touch sensitivity issue has been eliminated but there is one con, placing and connecting this internal cable can be fiddly and there is a trap if you do not use care you can end up damaging the cable end where it screws onto the electronic box. Also I suspect the engineering and process required to allow this internal cabling has added extra cost to the MD, but that to me is money well spent. 1 Link to comment Share on other sites More sharing options...
LipCa Posted September 9, 2017 Share Posted September 9, 2017 As far as the GB 2, I run the wire straight up the shaft and create a 3" coil near the connection and zip tie it to the shaft there. I don't like the "wrap the shaft". As far as the ATX internal wire, it's ok but I read about wires fraying? Would prefer no wire..... With the technology today why doesn't every detector have it? 1 Link to comment Share on other sites More sharing options...
Steve Herschbach Posted September 9, 2017 Author Share Posted September 9, 2017 39 minutes ago, LipCa said: As far as the GB 2, I run the wire straight up the shaft and create a 3" coil near the connection and zip tie it to the shaft there. I don't like the "wrap the shaft". It's still external to the rod. When I said wrap I simply meant it as an explanation/clarification of "external". How it is wrapped or routed externally is another issue. Like you, all my cables go straight up with excess at the top bear control box. Link to comment Share on other sites More sharing options...
LipCa Posted September 9, 2017 Share Posted September 9, 2017 I knew that Steve. I was just explaining how I handled the external 1 Link to comment Share on other sites More sharing options...
strick Posted September 9, 2017 Share Posted September 9, 2017 Internal. No zip ties to mess with and no catching on things. Faster to change the coil as well. strick 1 Link to comment Share on other sites More sharing options...
Andyy Posted September 9, 2017 Share Posted September 9, 2017 I hated the external wrap system on the GPX. Removing the velcro wraps was a pain. I tried clips and they just got lost. It made it a real pain to switch coils. I love the GPZ internal coil method. Link to comment Share on other sites More sharing options...
Cabin Fever Posted September 9, 2017 Share Posted September 9, 2017 I'm definitely a fan of the internal method.. The CTX system works great. I sold the CTX after running an E-Trac which I now prefer for coin hunting but the internal cable system doesn't work quite as well as the CTX.. It dosent shorten up as good as the CTX. Still much better then the external wrap though. Bryan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now