EL NINO77

My 3D deep separation test was the answer to this YT test ... Of course, properly set up Equinox has no problem to pass such a test. as well as many good detectors on the right coils. , because for this test enough detector with a frequency of 6.6 Khz ............. Over time, I have made this test even more challenging ... and more difficult ... it's a 0.6gram 9KT gold ring ... but you can also use a 17mm -0.6gram silver hammered as the same equivalent .. Here, it will be necessary to increase the frequency of the detector ...- but only increase the frequency ... here is still not automatically guaranteed only a good result .. This demanding test can handle only two of my detectors so far .. Equinox 800 at multi frequency and Rutus Alter 71 at frequency from 14khz -18.4khz ... Vista Gold Gain 30khz gives only partial and also and quite irregular signal ....- but it can already be considered a success .. in separation..

So far, I've tested some of my detectors in this 2D "Monte-style nailboard test" ... but I'm going to continue testing the 4g Silver Coin and test Teknetic G2 .... and Tesoro Mojave ... and more detectors I own .. An essential element in my separation tests is also the Deep Separation 3D Test of this type .... 2D nailboard and 3D deep separation test excellently show the separation capabilities of Detectors and coils of various sizes ...Because 2D nailboard tests and 3D depth tests have conflicting requirements for optimum coil size .. 2D nailboard Test -small 4-6" DD coil its better. 11 " DD coil is still significantly worse ... 3D deep separation test -11 " DD coil works great here .. Small 5-6 "or ellipse DD coils .... I work very poorly in this test ... or I don't work in general.. An excellent compromise here could be a 9 "round DDcoil... - and it also lies in the magic of Deus ,Golden-Mask detector ..excellent 2 and 3D separation, excellent sensitivity, and sufficient depth range in one 9 "coil of powerful detectors. This test is a bit less demanding ... assuming a good combination of detector setup and appropriate coil size ... this test can pass many "good" detectors. --------------------------------------------------------------------------------------------------------------------------------------- Another 3D test is already very demanding ... and perfectly shows why some detectors are exceptionally in 3D deep separation ..0.6 gram 9Kt gold ring is a very demanding target ... -------------------------------------------------------------------------------------------------------------------------------------------------- But we depart from the main theme of the MINELAB VANQUISH 340 .... IT IS A EXCELLENT DETECTOR FOR THAT VALUE FOR WHICH IS SALE. AND THE MULTI ID ACCURACY AT THE BORDER OF DEPH DETECTION ... IT IS UNKNOWN IN THIS PRICE CATEGORY ..

I did a small separation nailboard test .... on a 4 gram silver coin ... Vanquish 340 - V10 coil ... gained 5 points out of 8max .. Equinox 800- 11 "reel ... scored in the nailboard test this 6-6.5 points out of 8 points max ... Equinox 800 -11 "has been tested in Park2, ... recovery speed 6, IronBias F2 ... has been set to 5 .... to eliminate false signals from nails ... By default, the Iron Bias F2 at Vanquish. 340 .. guess at value = 4 Equinox ..- ..Vanquish falsifies a little more on nails .. Equinox 800 on Iron bias F2 =5 .....falsifies on nails less than Vanquish 340 ....

Equinox's excellent separation on 6"coil..... is based on correct discrimination of 0 or less (or allmetal), tone break of 0, and iron bias of 0-3 ...., recovery speed 6-7 ...of standard 11 "coil is excellent in deep 3D separation .. in recovery speed-6.... Vanquish 340 has recovery speed set to approximately Recovery speed 3 .... therefore its separation capabilities are a bit limited ... Teknetics G2....Here is the question of coil size ,,, on coil Nel snake separates excellently on the surface ,, on coil 13 "ultimate is also good but in deep separation ..

...Palzynski ..... thank you for the information and Test....... do you have the ability to compare the Vanquish 340 with the Vanquish 540 in these tests? .. For me, the Equinox 800 is still better than the Vanquish 340 ...but the Vanquish 340 is less 1/3 of the price of the EQ800 ....but it's an excellent "low cost" alternative to Equinox.."ID" But I also assume that Minelab continues to develop in multi-IQ, and in the development of Vanquish, some improvements in Multi -IQ tech... boilers may not be included in Equinox 2.0.12 firmware. Of course, a lot of "magic" can be done by the V12 coil itself in the actual size of 9x12 "... which can be better optimized by Vanquish's Multi-IQ tech... I still believe that a properly selected coil can optimize the detector's properties .. and also directly enforce its success in detection .. This is a problem for many branded detector manufacturers who simply can't make the right coil.....and so restrict otherwise high quality detector either in terms of depth or ... separation, as EMI resistance ... "C" ... Palzynski ....health is just one .... take care of yourself. ..👍

The Equinox 800 will be somewhat more powerful than the Equinox 600 ... because the Gold programs are sensitive enough in -Mix mode to match the sensitivity and range with the Fisher Gold-Bug2 detector. 6" Equinox coil Range... for 0.003 gram gold -Gold 1 program : in Mix mode- 3.2cm... - Park 2 program : in Disc: 1.8-2 cm .... Another good advantage of Equinox 800 is the possibility to use separate 1F frequencies 20 Khz and 40 khz also programs type Park1-2, and Field1-2 , Gold1-2 programs... for example in places with strong EMI ...where sometimes the multi-frequency at the set high sensitivity may be poorly usable .... Wanquish is sensitive enough ... but will not reach deeper for small gold than Equinox 800 or Equinox 600 ..

If I compare my 9 "dual coil 14khz for Aka Signum with the classic 13" DD coil .. so the 13 "DD on the 12kHz coil is generally deeper on all targets .. in slightly mineralized terrain .. Practical field detection on mix mode is a no problem ...OK One of the intriguing features of this dual coil is that I can run it on AKA Signum as well as the maximum Gain10 .. -with no false response from the ground ... or EMI ..

KAC .... I do not have multi kruzer ... regarding coil 7x 10 "... / 11" DD Fisher style / ... so this coil is still a compromise between 2D surface and 3D depth separations ... .... even though I think there is a round 9 "DD coil / Deus, Golden-Mask, and Rutus 23cm O-OR/ more optimum solutions for me ... for better 2D and 3D separation ... as well as depth of detection .. for perfect certainty which coil is better ... you would have to compare both coils on Multi kruzer detector ...... elliptic11 "DD coil as well as 11" DD round coil .. ... someone who has both coils available can do a similar test ..

I'll write something about it... ..3D separation Test for 4 gram silver coin goes through significantly more of my detectors .... and there are working only 9-11 "coils ..... Small 5-6 "coils and 5-6x10" ellipses coils don't work well in this test .. .... about the tests in the strong mineralization ,, so I pay a lot of attention ... ... even in this mineralization test, the small 5-6" DD coils do not achieve the best depth results for coin-size targets .. ,, Standard 11 " DD coils are better here. Even though special coils can handle significantly stronger mineralization .. like DD coils ..

Is this Predator 3+ ..= Golden Mask 3+ clone? OO coil has favorable properties in mineralization ... I just say 11 "coils and the and larger coils improve 3D separation .. Only 2 of my detectors on 11" standart DD coils in this test well and reliably.. separate this very light.. 9Kt- 0.6gram gold ring between 6" long nails .. Minelab Equinox 800 .. on multifrequency .. and Rutus Alter 71 v.2 on frequency from 14khz -18.4khz .....

A simple test ... to determine which recovery speed is used by individual Vanquish programs. is to find out ... from what distance detects an object of the size of a can or shovel .., lower recovery speed is much more sensitive to objects of this size and has a greater reach .. My Vanquish 340 detects my field shovel .. Fiskars from quite a long distance ... So in detection I carry it further from the detector coil .. I estimate recovery speed at equivalent recovery speed = 3 for Equinox .. and working in strong /6-bar /mineralization also suggests...you have to reduce the sweeping speed a bit... Equinox recovery rates are strongly associated with a certain level of mineralization ... I would say that they correspond to the number of Fe3o4 mineralization bars in fisher F75 / Teknetics T2 / G2 ... The Recovery speed function in Equinox mainly addresses the following tasks: 1. Enable to achieve, correct detection maximum detection depth and correct ID for given terrain mineralization .. 2 ... Increases and decreases detector separation properties. So ... if you detect in the field with a level of 5-6 bar Fe3o4 mineralization .. Equinox will be optimally set recovery speed to levels somewhere 5-6 .. where you will get the best depth for this terrain ... as well as regular and reliable signal detection ..in normal coil sweeping ... in such terrain .. On something less than 3-4 recovery speed such as optimal recovery speed (5-6) you can also get a possibly deeper signal .... but it may not be regular .. or it is only a one-sided signal ..Detection is possible .. but not is optimal ... and you can simply go through several targets ...if you sweep the coil at normal speed ,,, Conversely, at too high recovery speed 7-8 ... on given terrain / 5-6 bar / ... you can start to lose the maximum brain depth for this terrain .... but further increase the 2D separation properties of the detector .. Anything in very low mineralized terrain / 1-2 bar Fe3O4 / can easily use all Equinox recovery speed ... 1-8, where recovery speed 2 gives the deepest ID ... but Recovery 3 is the most optimal for all small size items , and small,medium, large size coins .. ...but on items larger than coins will be recovery speed 1 and 2 deeper ..

Time frame for product introduction .... Impulse... has been established .. ...Carl Moreland defined it and specified it for up to six months ....... And that's not too much of a time ... let's not forget Fisher can work on developing some new detection products at the same time. What I would consider a rational step ... For example.......... before the time mentioned new Fisher F-50 ... However, This also applies to the new design standard and technical capabilities of a modern metal detector.... The manufacturer should also respond to this....in an appropriate manner...

In Central Europe there are coils for Vanquish available for sale ... coil price is: V8 = 104 euro. V10 = 127 euro V12 = 138.50 euro

👍Thank you for the answer Abenson ..... I know that these are the conditions from a very strong salinity environment..such more than... the salinity of the sea....

Abenson ... do you see any noticeable difference in the work of the Vanquish detector programs ...on the Great Salt Lake detecting? ... ...And which program do you prefer in such conditions?...

JW...... I would like ... if you were to continue to contribute to the X-coil thread ... with your rich gold prospecting experience ..., I know that you try to use the detection equipment of what works best for you ...

Stephen .. I'd be very careful about buying such a detector .... especially when you look at other long range detection products ... that it produces .... even if the products look like Hi-tech .... doesn't mean they really work ... pay attention to what you are buying ...

As you can see programs gold 1 and gold 2 are multi-frequency ... EQ 800 program Gold1 EQ800 program Gold2

Multifrequency Vanquish 340 contains 4 frequencies : 7.8kHz, 13.4kHz, 18,7kHz and 39kHz ... ....regarding the sensitivity of the Jewerly program on Vanquish 340 and V10coil. versus the Beach 1 program on Equinox - in the airtest, and certain predominance of the Jewerly program / Vanquish / within a range of 0..1grams of gold 11cm/vanquish/ and 10-10.5cm /Equinox/. I also see the Vanquish 340 increased range to 1.15 grams open gold earrings with a range of 13.5cm ... compared to the program Beach1 / Equinox / there is a range of 11cm .. Equinox I have for sure .. tested on 11" coil / sensitivity 20 / and also 6" coil / sensitivity 22 / but I got about the same reach on the open gold earring which was 10.5 and 11cm .. Vanquish with a range of 13.5cm has actually increased sensitivity to ... this type of conductivity of the object .. the coin size objects no longer see this difference ..

I made a scan of the Vanquish Tx signal using an oscilloscope and I can say that it is very similar to the Beach1 program of Equinox. Vanquish Tx Jewerly program Equinox Tx Beach1 program

..To make it very light ... and yet a well balanced detector on the 11 "Equinox coil / 510 grams / ... is not that easy .. because the weight of the 11" coil // 510 grams and the weight of the middle and lower rods / total 200 grams / already on the start limit the correct balance .. if Equinox offered a 9 "coil ... weighing up to 400 grams and 2-piece construction of the upper and lower rod ../- 100grams / then the balance of Equinox would be excellent .. note that each treats Equinox on a small 6 "reel (300grams) as very easy and well balanced....: In the picture is...Equixox, spectra V3 and Teknetics G2.. : 1.Equinox on telescopic rod :..... metal armrest.. and the heavier upper part.... of the telescopic rod tie Equinox well balanced on the 11 "coil. 2 .. Yes ....Whites Spectra V3.... is very well-balanced and also lightened by replacing the accu-pack NI-Mh... for a lighter- but stronger Li-Ion pack.. / -180gram less / .. Whites Spectra V3... design allows very heavy 13"-18"coils/680grams-1030grams/to be used with acceptable balance... 3 ..Teknetics G2 modified 2-piece rod /upper part from Equinox+ longer bottom carbon rod/-also is -150gram easier and better balanced .. not only on standard 11 "coil but also on 13" ultimate coil /530 gram coil/.. My personal opinion is that the S_classic desing rods works very well only with a certain coil weight .. / max 400-maybe 500 grams/ .. after that is better straight bar ..

Vanquish340 even at its low price can be quite light and compact ..