Mike Hillis

Time travel?.....3K in my pocket.....take me back to 2008 just before the crash. I'd spend 40 bucks on a used tracker IV and buy stock with the rest on the day after the market crash. HH Mike

Those bubblegum machine rings will eventually lead you to mom's gold, Kac . Keep at it. HH Mike

I like my Gold Kruzer. I haven't had any time to write about it. HH Mike

Thanks phrunt, Its a neat looking ring. I'm going to have to have the amethyst ring tested. I found it's twin on Amazon. Its twin is 14k White gold. My ring even has a marking at the same location, only its filled in with the coating and un-readable. Fingers crossed..... Mike Presentation1.pdf

First rings with the Gold Kruzer. The anchor ring is rose colored 925 silver. The white ring is costume but the stone looks to be real. It is very pretty. The camera just doesn't do it justice. Everyone I show it to tries to keep it. HA. A fun couple of hours. HH Mike

Was out scouting a new site Sunday morning and found this little gem....10K with about 12 diamond chips. Only got to spend about 40 minutes there before the people ran me off (read : when people show up I leave). I have a feeling this is going to be a good site. I'll have to get there earlier next time out. Again....F75LTD DST, default settings, 1N tone, solid 24 TID. HH Mike

Only wild mushrooms I ever ate grew out of cowpies

Nice Gold!. 22 VDI is pretty solid in the tab range if the MX7 follows White's normal VDI chart where a 19 is a nickel. HH Mike

I bought this package with a good discount. Quite happy with it. One thing to note that it doesn't come with headphones so you either have to purchase the Garrett Headphones separately or purchase the headphone adapter to use your own headphones with it. In my case I also bought the adapter. HH Mike

I was hoping to be posting Gold Kruzer finds but haven't gotten to use it yet due to a missing part saga that is dragging out into week 4. So I took my trusty F75 LTD out this weekend and found this little white gold beauty. A nice solid 18 TID number on the F75. Resizing has clearly removed the K content. I'll have to have it tested to find out. Thought it was platinum at first but decided the stones dictate a white gold. Anyway....it made my day. Maybe it will juice up yours too. HH Mike

My tinnitus normally sounds like summer cicadas singing in the background most of the time. Kind of makes me feel like its a late summer afternoon all the time. Only affects one ear though and is more noticeable when its quiet. The hearing loss is more of a bother than the singing cicadas as I can't locate the rattlesnake's location without moving around to triangulate with my one good ear. HA! Just dialing in the right threshold tone pitch works wonders, and varying it through out the hunt a little. After an hour or so it sort of fades out and I need to change it up. Tone Id is nice. Good luck. HH Mike

Thanks SL, I'll have it in hand in a couple of days and will see whats what. Mike

I'm back to the Gold Kruzer. I know. crazy.

You are not going to find it with what you have. An F75 with the 3x6 concentric coil in Disc, boost mode, at 99 sensitivity will hit it if you get within an inch of it. It will be a tiny signal that bounces all over the place, mostly into the 40s. Hunt in1 tone VCO with the Disc at 6 and notch out everything above foil and hunt for the tiny tight response. The GoldbugPro/F19/G2 will hit it almost as good as the F75 but the F75 boost mode has a much better audio. Good Luck. Even prospecting units have it tough on white gold studs. HH Mike

The poor operating manual means you really got to hunt for explanations of the feature set everywhere else. I've had to read Steve's review four times and ask questions on the board to find out setting ranges and explanations. The GM24K has a fixed low tone break point. That took it off my list. Per Steve's review its fixed at the 50 VDI. HH Mike .

Decided to walk away from this one. HH Mike

This looks like a very innovated detector for a pulse unit when you examine the feature set. Pulse delay starts at 7 and runs up to 12. (A pulse delay of 7 is a feat right there) Iron Mask Noise cancel SAT settings Sensitivity (Coil Voltage) All Metal mode Tone ID mode Mute mode (silence a tone ) Looks like something to pursue to me. What would you add for inland use? A progressive mute mode tied to the iron mask setting to give a mineral vs metal break point? Choice of mute mode selection. Tie it to the pulse delay selection. 7 -10 mute high conductors. 11, mute hole (medium conductors) 11 - 12 mute low conductors. Any ideas???? HH Mike

For small gold I use the Whites TRX. It runs at 12 kHz and it detects off the tip. Finds it all. I also use the Tek-Point. It runs good too, but its locked in 15 ns pulse delay so it doesn't always hit the small stuff well in my opinion. But it is a gen 1 model so I can't speak to the gen 2 model as I don't have one. HH Mike

Thank you Jimmy. That helped a lot. I am looking for processed gold, particularly fine chains and bracelets and fine gold earrings in sand and turf locations so iron reject is important to me. From your response I believe I can say it should have the iron rejection control I'll need. I feel much better about going ahead with my purchase now. HH Mike

Hi Aureous, Can you answer a couple of questions for me? 1) how many points of iron disc does it have and how does the iron disc setting equate to the iron disc bars? Like is there 10 numbers to a bar? 2)how many points of hot rock reject or bars does it have? None of the reviews go into the setting very well and the operating manual isn't very clear either. All I have to go by are some pictures, some that show one bar of iron disc, another picture on another site that shows two bars of iron disc, and then another picture on another site that shows three bars of iron disc. One video show up to 9 or 10 settings, another video shows where they ran it up into the twenties, but there isn't any definitive information about it anywhere by anybody. Same questions for the hot rock setting. Hate to play 20 questions to buy something but nobody is talking much about it. Thanks in advance, Mike

Tom, I enjoyed watching your GM24K video. You presented very well. It was clear you were very familiar with the detector and its features and performance. Good luck on your next endeavor. HH Mike

That is what is left after a troll chews a tire. Trolls chew tires like we chew bubble gum. They cough those up like an owl afterwards. I dunno shrug HH Mike

Looking forward to hearing how you do! HH Mike

Thanks everyone. HH Mike

Thank you for all the feed back and the pictures. I really appreciate them as I come back here and research. I really hope the GMK does good on my test target as the feature set is attractive. I'll find out in few weeks. I'm half way with the funding. HH Mike