EL NINO77

First of all, you need to realize that Equinox is a very effective detector at its price ... and the third firmware confirms that it wants to go further ... That doesn't change the fact that MXT is super Good .... and Spectra V3 ... if it had another upgrade that was planned, it would also be significantly higher than it is now .... Although my colleague claims that the original.. Spectra-Vision.. was the sharpest and deepest of all Spectra ... He already had 4 Spectra ..and he still uses Vision.... In 2 months we will hopefully do some Whites Spectra-Vision, V3.. and V3i tests on the test field .... and confirm or refute this idea ...

First of all, it is necessary to realize ... that every metal detector ... even the successful one ..can be further improved..to perfection ... ,, and if it is not the right way .... then it is necessary to continue and to produce a new metal detector which will be better than before .... but at the same time it can address the requirements of many detectors for better performance of the detector and its effective design .. There is no other way ... It is still necessary to go further ... It is still a competition ... where the other manufacturers of supers are also really good ... If Whites get me a kind of chance .... it's right now for him .... to come up with something innovative .. "New Spectra" .and also rightly supported and advertised his still well and proven MXT detectors ...

English subtitles will be included here in the evening....

Vanquish 340 is a multifrequency for $ 200 ... which is practically the price of a better pinpointer ... it is practically free ... It is clear that I would also like the programs all metall, coin, jewelry could have different iron bias settings ... but at this price it is a detail .... which can be forgotten ....

I will have such a Two box available for the next week. The coils of the Two-box are thermally compensated .. I will test it on the Spectra V3..on individual 1Ffrequencies and on 3Fmultifrekvenci..and I will pay close attention to the use of TX bost On .... and I will present the results of the field test .. Here on the detectorprospector.com forum ... As a loyal user of the Spectra V3 and V3i, I am glad that this Two-box coil has been created ... and especially with the Spectra V3 which provides so many analytical possibilities ... This Two-box will also be available for Whites MXT and DFX detectors ... as well as for the Whites 5900/6000 series ...... For the next week, there should be tests and other additional information from the manufacturer itself ... from which means in a few days ... http://twobox.eu/

I'm glad you solved it .... Locator ... Spectra is an exceptional machine..and I have a lot of detection options ..... in the picture is Spectra VX3 with Taktyk Two-box ... The Signal probe screen on the Whites Spectra VX3 is the same as on the Spectra V3i .. except for the TX bost function ...

Hello * Locator .... 1. First go to Sensitivity in the live control Bar menu ... and 2. then ... press the Zoom / View button...

When setting the Alter * 71 reaction, you must take into account that this setting affects 2 things. 1. work in various mineralized terrain ... where the higher setting Reaktion 3-4-5 will work well even in high mineralization. 2. The reaction setting also affects the separation speed of the detector ... with the reaction setting 6 you will get excellent separation results. Here it is necessary to add that the separation is also affected by the frequency used ... the frequency around 13-14khz will already have excellent separation properties ...

In any case, I would not underestimate the depth capabilities of the Whites Spectra V3 even on a small 7 "coil .... when you use 3 F multifrequency with a Tx bost or a separate 1F 7.5 khz ... they are really deep and with a good ID ... The weight of the Spectra V3 on this small 7"coil is 1900 grams with a Lithium Battery pack ... but the balance is so perfect that you can't feel the weight ..

For equinox you can still use 1F -20khz and 1f 40 khz ... to improve the separation in certain cases.. Apex ..this has a 6x 11 "coil and it helps separation ... we'll see in practice.

Whites MXT All detection combat versus Minelab Equinox 800 on gold programs ... on the Top Digin test field. Who will win? Will it be a 20-year-old Single-Frequency Sophisticated Detector Whites MXT ... or a Modern Multifrequency Detector Equinox 800? .. The terrain of the test is mineralized and the target detectors are masked with iron .. so the task for these detectors will not be easy ... This test is from my colleagues from Top Digin ... both colleagues Jack and Mike have already had something to do with various detectors, among others, in recent years with Equinox, both of whom I consider to be an excellent detector. You can see for yourself which detector can play a better result ....

7 "ultimate gives a much better signal to 0.05gram gold ... than 5.3" CC on tracking .. sensitivity and depth on the field test is the ultimate practically identical to the 6x8 "SEF coil. but when I do a Trick on a 5.3 "Concentric Coil..and I manually remove it in a locktrac at +2, the numbers above the tracking value are the sensitive ones and it also has a depth .. if with MXT it was possible to manually add +1 + 2, + 3 / or minus...additional numbers to the tracking, it would be great=Super....... .. because such a setting does not yet negatively affect the correct ID ... and adds a better signal as well as a deep ID......

7 "Ultimate coil... I tried it on MXT yesterday .... and it detected my hand ... The 7 "Ultimate coil itself has a diameter of 19 cm with a cover ... and a total weight of 445 grams... With black sand 7Bar Fe3O4 = 4% magnetite ... test I can set Gain to 9.5 for this coil without overload ... it's the same as for SEF 6X8 "- it also works on MXT to a gain of 9.5 .. The range of the 7 "Ultimate and Sef 6X8" coils is very similar in terms of sensitivity, depth and ID on the MXT .. but in my opinion the 7 "ultimate will be better separated from the point of view of its circular design also because its detection window is narrower than the SEF coil... Black sand box= 4% magnetite..

Mr. Steve ... are you proposing ...... that Fisher make a replacement long-shaft lower shaft ... as an accessory ?.. It's clear to us that the U-shaped coil holder is specifically..and only the manufacturer can solve this thing...

Now that i tested the coil of 7"detech ultimate i tried to pass my hands in front of the coil ... yes it detects minerals in my hand .. it's a very sensitive coil .... and I have incredibly good parameters V rated on Spectra V3 ... I have multi 3F .. and 1F 22.5khz is the best Gain 15 ...

One of the good alternatives for maintaining a 2-piece construction for a Fisher IMPULSE AQ for people who have a higher height ... is to use a longer bottom rod. Thus, it maintains the planned strength and durability of this construction of the Impulse AQ detector. ...modified TEK.G2 from a 2-piece construction with long bottom carbon rods...

Thank you Jonh ... the coil 10x14 excelerator will be in my wish list ..... ,, mainly because my colleague has a very good experience with a similar type of Mars Tiger .. Today I tested the coils 4X6 "shooter, 18" detech excelerator II and again the coil Sef 6X8 ".... as a comparison coil .. Coil 18 "Detech excelerator ... will detect coins ... but not enough gold ...

Thank you John ... I believe ... that the 5.3 "coil of concentric coil is the most sensitive to the smallest gold ... ,, I have a similar observation in the 4.5" CC Sniper from Garrett ,,, I know you are one of those .... ..... who have the most experience with different coil..... for Whites MXT ... And I really appreciate your opinions ....👍.... The main task of my comparative Test is to find the coil that gives the best signal and also the numerical ID at 0.1 gram .... All the coils that I could try so far did not give any numeric ID to this tested target, even though the sound signal gives very good ... Coils I tested on Whites MXT ALL Pro are: Coil 6X8 "SEF, .. 2x coils 12X10" SEF, ... 2x coils 10 "DD Whites, coil 5.3" Concentric Whites Eclipse, coil 6x10 " Whites Eclipse, ... coil 6X10" Mars Sniper ,, ... coil 13 "Detech Ultimate ... and coil 13.5" Taktyk Rainbow ... Such a coil must also pass my 4x4 field test correctly for various deeply tested objects ... 50 eurocent in 37cm whit ID... I want to find the optimal coil to make it ... what the Whites MXT itself can do For the detector can be seen in this test ... which, although not in English ... in the test shows the quality of the MXT ..

Since I have had an MXT ALL Pro detector for a few days now ... I tested a pretty nice pile of coils on my test field ..... Does anyone have experience with the 7 "Detech Ultimate coil? .. I'm looking for a coil ........with the best ratio of sensitivity - and a range of 0.1 grams of gold ... Any relevant answers will be welcome ..👍 6x8" SEF Coil in test...give a nice signal but no ID... 5.3" CC Whites Eclipse coil... in Test...very weak signal without ID... 6x10" DD Whites Eclipse coil ..in Test...give a nice signal but no ID... 0.05 gram gold in 10cm....

I tried the reaction of the magnet to 1 Euro and 2 Euro coins .. The 1 Euro coin is slightly magnetic, but the 2 Euro coin is much more attracted to the magnet.

I believe that out of 100 detectors in the hands of users in the USA, a strong discussion will develop very quickly and, first of all, experience with the use of Impulse AQ in the detection itself ... I wish these users success ... And I am very pleased to receive direct information on the Impulse AQ team directly from Mr. Steve Herschbach as well as other members of the Detector Prospector Forum ... For detectors who don't live in the USA..and waiting for this detector to come to Europe and further to the world .., I just want to say ... First of all .. that Fisher is not sleeping and continues to develop Impulse .. that Impulse is also solving for Terra detection ..., and also Gold prospecting detection ... so we have something to look forward to ... Very it pleased me ..👍 I believe that there will be a really strong communication about Impulse, both on the part of Team Fisher and also from Impulse users. As Mr. Steve noted ... maybe it's a good idea to give a little more openness in Fisher's Information.. regarding the delivery of the first 100 Impulse in the US ... It will help any other interested parties in the world to properly accept this fact..and prepare in time and money for the possible 2 wave of distribution of Impulse detectors ..., or even the Improved Impulse model ..

....Two days ago, a colleague sent me a video from the test of a VLf detector which passed the tested targets..one of one of the targets was a very thin gold chain folded into a ball at a depth of 6cm ... The Golden Mask detector hit it with a nice signal ... as well as other deep targets ... wrote me ... The interesting thing about this test was ... that this Analog detector had a very high level of discrimination at the level of up to 5.5 ... which would in any case prevent detection .... if the chain was only on the ground ...because you are already discriminating against 3 .0 ... you are already eliminating such low-conductivity objects... ... we discussed this topic for a while ..because they are analog detectors - so you don't see the ID of the target you are detecting here...... I experienced a similar situation with the detectors Tesoro mojave and golden Mask..where the low-conducting targets in the depths were detectable and severely increased discrimination, which would in any case make it impossible to detect four targets stored in the shallow depths .. With this simple example, we come to the essence of the problem with the ID of classic VLF detectors, that is, the increase of the ID of objects to be stored at a greater depth ... - to the extent that at the limit of detection can be this ID up to the iron. As for Garrett's Ace, it is known that even on deep targets with ID 80 and more they give a nice strong bell tone signal ... which in some cases really helps in the effective detection of deep signals. So far, it is difficult to say how Apex will have the calculation of goals with ID solved, but I feel that the multifrequency here will be very helpful in the correct identification of the goal ... Equinox - I consider exactly multi-IQ ID in depth to be one of the best features in this detector ... - because it eliminates the shortcomings of the classic VLF detector in the field of shifting the display of ID in depth. of course..no it will suit everyone......

My proven setting of the alter for terrain heavily polluted with iron .., use the program fast 14khz-18.4 khz ... using Mix mode with a sufficiently fast Sat ,, and also set low volume iron ... I would be careful to use a VCO for strong separation ... because then you may have too much signal in from the iron ,,, but it can be adjusted with reduced iron volume .., and discrimination and the VCO will then work more in the non-ferrous field. . You don't have to worry too much about setting the mask ... because Alter adjusts the Mask according to the set Filter speed ... At a filter speed of 6 j you set the maximum mask to the level of 2 max ... of course you can reduce this masking as needed.

Some coils designed for DFX .. when used on the spectra V3 of the brain, certain phase-shifting of the coil is manifested at a high frequency by the ID on the High Conductive Coin already transitioning to iron ... with one exception ,,, and these are the high conductive coins detected on edges - these are detected in areas of non-ferrous objects ... It is a very problem especially at a 1Ffrequency of 22.5khz ..., as well as with the use of 3F multifrequency..........but it occurs at the multifrequency proving frequency of 7.5khz and 2.5 khz well enough to replace the detection deficiencies at 22.5khz .. I discovered a similar problem a few years ago with the Detech 6x8 "SEF MTX / DFX coil - which I used on the Spectra V3 ... Congratulations to Steve .. for the "new" DFX detector .... and I believe that the Bigfoot coil will perfectly complement this detector ...👍 I have now also gone in a similar direction ... and I bought a Whites MXT All Pro ... which will complement my Spectra V3 and V3i in detection..where there are also advantages it ...because of that I can use all the coils from Spectra ..