brogansown Posted September 13, 2015 Share Posted September 13, 2015 Last week my brother's GP 3500 quit working right in the middle of a patch. We've tried new cables, coils, earphones and switches, so we know it is internal. Who repairs the older Minelabs-does Minelab or is there an independent repair expert out there? We've heard that Minelab doesn't support the older models, but don't know that for sure. Link to comment Share on other sites More sharing options...
vanursepaul Posted September 13, 2015 Share Posted September 13, 2015 Ismael Jones Perth, Western Australia Tel: +61 8 9452 2992 Mob: 0417 947 764 URL: http://www.minelabmods.com Email: ij@minelabmods.com Link to comment Share on other sites More sharing options...
Steve Herschbach Posted September 13, 2015 Share Posted September 13, 2015 First off, sorry to hear about that. The list of machines Minelab considers obsolete is at http://www.minelab.com/anz/customer-care/product-notices/discontinued-products Even though the GP 3500 is on that list I would encourage you to contact Minelab first before you do anything else. Shipping to Australia and back by itself will not be cheap so a free call to Minelab first is worth a shot. Minelab Americas 1938 A University Lane Lisle, IL 60532 Service Centre: 1-877-SOS-MLAB (1-877-767-6522) Email: service@minelabamericas.com I and others here would be extremely interested in what you hear from Minelab. The only outfit I know of in the US that I would call is Keith Willis at East Texas Metal Detectors http://www.brokendetector.com/prodserv.htm I am not sure he can help you but they have been repairing detectors a long time so are worth trying. Link to comment Share on other sites More sharing options...
vanursepaul Posted September 13, 2015 Share Posted September 13, 2015 I have 90.00 to get mine shipped back...can't remember what it cost to send Link to comment Share on other sites More sharing options...
Swegin Posted September 14, 2015 Share Posted September 14, 2015 I read on one of the forums that Minelab Aus. may still service the older machines. A quick email wouldn't hurt. Link to comment Share on other sites More sharing options...
brogansown Posted September 14, 2015 Author Share Posted September 14, 2015 Thanks guys for the help. I'll get the addresses to my brother and report back when and if it is resolved. Gary Link to comment Share on other sites More sharing options...
Rick K - First Member Posted September 14, 2015 Share Posted September 14, 2015 Check with Kellyco. When I inquired about whether my SD-2100 could be repaired if it broke I was told that subject to spare parts availability, they could repair it. On another forum it was said that they are doing CTX repairs for MINELAB now, so their connection must be good. As far as Keith Willis, I was NOT satisfied with my repair dealings with him a couple of years ago. Sorry. Link to comment Share on other sites More sharing options...
fredmason Posted September 14, 2015 Share Posted September 14, 2015 If Minelab fails you, contact Ishmeal. I have never read an unhappy comment about him...however, for factory repairs on my 3500 he suggested Minelab Australia as a first resort and him as a backup. That was two or three years ago. The shipping there was @ $60. The repairs and shipping back was @ $600. fred Link to comment Share on other sites More sharing options...
tvanwho Posted September 15, 2015 Share Posted September 15, 2015 Hmm, I only live about 10 miles from Lisle, Illinois...should I go check the Minelab place out for you guys? What questions should I ask ? I thought Minelab had a repair shop in Nevada? -Tom V. Link to comment Share on other sites More sharing options...
Rick K - First Member Posted September 16, 2015 Share Posted September 16, 2015 According to a thread, on the Friendly forum, Minelab in Chicago no longer does their own repairs, but outsources them to Kellyco in Fla. and to someplace in Chandler AZ for the gold machines. The guy who,posted the info is a Sponsor, so I guess he's a dealer and should know. Kellyco's repair service generally gets good customer feedback. I have no Idea who or what the Chandler AZ facility is. I checked a bit more and the address was MineLab Asc West 3863 E Sawtooth Dr Chandler, AZ 852 That is a residence however Another address was Minelab West ASC 4960 S Gilbert Rd suite 1-134 Chandler, AZ. 85249 That is a strip mall and google street view doesn't show anything like ML there. So - I don't know. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now