oneguy Posted June 24, 2021 Share Posted June 24, 2021 Phrunt... My 6 is headed my way on the big brown truck and the heat will have me sidelined for at least a week. So with the 6 showing up during the heat wave I'll be sitting out I've decided to shorten up the Monster like you did and retire it temporally as a PP'er for the 6. Question is this....does all the wire wrapping that close to the 5" coil cause you any problems or make the Monster react any different? Thanks!!!! Link to comment Share on other sites More sharing options...
phrunt Posted June 25, 2021 Share Posted June 25, 2021 I've noticed no ill effects from having the coil so close to the control box, nor the cable causing any issues, I have my cable tightly wrapped as far from the coil as I could along with a Velcro to hold it in place. I haven't noticed any sensitivity drop from having the metal near the coil, it still appears to work just as it would normally. I used a kids broomstick handle from the hardware shop which was only about $3 and I spray painted it black. It's been doing the job well, I have a webbing strap that I run through the handle that has a easy to unclip plastic clip on it so I hang the Monster over my shoulder on my back so it's easy to take off and use. I've taken that off and can't find it at the moment, it must be somewhere in among my gear 🙂 I'm very happy with the Mini Monster, I originally got the idea from Norvic who did the first Mini Monster I'd seen. It's a great use for a detector I don't really use much anymore for anything else, and it's quick to put it back on the normal shaft if I ever want to. Link to comment Share on other sites More sharing options...
geof_junk Posted June 25, 2021 Share Posted June 25, 2021 Simon thanks for getting the topic back on track. If a pin pointer is required then you should get the best, and that look great. Link to comment Share on other sites More sharing options...
oneguy Posted June 25, 2021 Author Share Posted June 25, 2021 Thanks Phrunt...!!! That's what I needed to know. Been chasing down my PI targets 80% of the time with "full sized" Monster already and find that between the disc and ease of PP,ing it saves me valuable time. Now to shorten it up and and add a strap..... jmo Got it done and used my "detector buddy" off my etrac with the quick release do-hickey strap and that'll work for now. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now