Jump to content

Recommended Posts


Mind boggling, how the hell!!!! Reminds me many years back last century an old partner (moved on) was visiting the rest rooms in a pub at Townsville NQ OZ on our way home from a Charters Towers detect mission, he came back to the bar with a 3grammer he`d picked up by eye in the toilet cubicle, coz I gave him heaps about it falling out of his pocket but as he was as honest as, someone else dropped it obviously.

  • Like 2
Link to post
Share on other sites

Amazing. I always suspected gold is also growing on trees in Au.

  • Like 1
  • Haha 2
Link to post
Share on other sites

Amazing story! I always liked the smell of eucalypts oil. Now I know why!

  • Like 1
  • Haha 1
Link to post
Share on other sites

Crikey, GC you are overdue for a trip downunder, eucalyptus oil and gold is calling you.

Edited by Norvic
pressed enter unintentionally
  • Like 2
Link to post
Share on other sites
7 hours ago, Norvic said:

Crikey, GC you are overdue for a trip downunder, eucalyptus oil and gold is calling you.

And I will bring good espresso 😁

  • Haha 1
Link to post
Share on other sites

GC maybe, but you might develop a taste for some FNQ OZ Expresso Jaques Australian Coffee (jaquescoffee.com.au).  I would be a sad host if I didn`t ensure you`d tried some of our home grown should you come downunder and why not before? I am sure they could have some heading towards you in the mail.

JP, Jaques cater for all us coffee addicts, with pods for your machine. There is no better way to start a golden detecting  day, the FNQ way.

  • Like 2
  • Confused 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Gerry in Idaho
      I've read a few posts from those who have both and their input is pretty much what I expected.
      Having fun (especially with others) is the majority of why I enjoy detecting.  Only a select few actually do it for a living and do well.  The rest of us (me included), enjoy the hunt, adventures, comradery with like minded friends, and getting some gold on occasion. It's looking like the GPX-6000 is getting the majority of gold better than the GPZ-7000.  So, is the extra weight worth the rare occasional big nugget?  Lets go a step farther.  Say the ZED hits a 4 ounce nugget at 34".  Will the 6000 hit that same nugget at 30", 32" 33" or 34".  Say it's 2" less and only gets the chunk at 32".  It's still near 3' deep which is deeper than most folks enjoy digging and or most other detectors out there.  
      So the reality for most folks, the GPX-6000 at a cost savings of $2000 and over 2 pounds lighter, better ergonomics, no more tethered into a harness, more user friendly, real wireless Bluetooth phones, is the best option for most.
      Like I said in another post.  There should be a convoy of GPZ users heading down the highway to get the new GPX-6000 and having more fun, more gold more often.  I can help make that smile happen.
      Anyone have a point I am missing or totally off, please chime in.
      Pic of the nugget will probably only be a few inches in depth difference between the 6 and 7.  But the majority of us would probably hear if with both machines at 30 or more.

    • By Purplehays69
      I totally understand that our Aussie brother's n sisters always get the jumpstart on the newest Minelab gold detector but our wait in the USA is getting totally ridiculous......
    • By Condor
      My personal observations only, quick testing with no appreciable methodology.  Make no conclusions based on my limited time with the machine.
      I had Steve's 6000 for a couple hours this morning.  At sunup I detected up a swale where Jason had found a couple nuggets yesterday.  I gridded a section 6 ft wide and about 25 yds long.  I marked 7 undug targets, 4 definite dig me signals and 3 iffy threshold warbles with the 6000 and 11" coil.  I then covered the same ground with my 7000 and 15x10 Xcoil.  The 7000 had no trouble with any of the 4 dig me targets and found no new targets.  Nothing but Ground and Salt noise over the questionable targets.  I dug the clear targets, first 2 were micro nuggets in the .2 gram range.  Third was a shallow hot rock and the 4th was surface trash.  I ran the 6000 back over the questionable targets and couldn't get anything repeatable.  
      I wish I had known JP's thing about the speaker/EMI because I was noise cancelling often, especially if I set the machine down for any length of time.
      Jason's summary from yesterday sums up our limited joint testing quite well.  My feeling after this limited time is that if I were 5 years younger, I would stick to the 7000 with the array of X-Coils to suit the conditions.  But, I'll turn 67 years young next month and my detecting shoulder has been nagging me for several years.  I have fashioned a hipstick that transfers the detector weight into the frame of an archery fanny pack with shoulder straps.  I thought it was great until I swung the 6000 with 11" coil.  Regrettably, I decided to run the 6000 with the 17" coil with no bungee this morning.  45 minutes and I was done, hence my abbreviated time on the 6000.  I'm  gonna want a bungee for the 14" DD or the 17" coils.  
      N. Nevada at this time of year is tough to hunt.  The weather is great, but the ground has enough moisture to make the salt darn near unbearable in many places.  The 6000 with 11" coil tames it some, but there's no magic absent the DD coil.  Hot rocks are about the same as the 7000, although I found the Auto + with nearly silent threshold chops the tailing edge of a hotrock signal.  You'd still have to dig them, but without enthusiasm.  
      Am I buying one, probably.  But I'm not rich and doubt I can justify $13k worth of detectors.  I'm going to need to make an either or decision.  
    • By Steve Herschbach
      Has Minelab not given dealers a price list yet? What are the accessory prices for the 6K? They are delivering around the world (except the U.S.) so somebody must have accessory pricing. Or it’s out there and I’ve been too busy to find it. A lot of people are not going to buy until after they know the accessory pricing,  and decide it’s acceptable.
    • By Skozzy99
      Still very new to the gpx. I go through the routine of EMI reduction and then GB, but even when absolutely motion less, every 5 seconds I get a warbling sound that lasts for about a second or so. When I start to swing a bit, it still does that warbling at the same interval. This is with the 11 commander DD. I haven’t tried this with the mono yet. I do have a single phase 7200V line about 200’ away. All settings are at factory presets. I have tried adjusting RX gain and stabilizer without success. The only thing that smooths it out is the cancel switch. Is this a common occurrence? I’ve searched 25 pages of Minelab forum pages (here) to root out the answer, but no luck yet.
      Thank you
    • By Steve Herschbach
      ....... is that they lack any Geosense!  Sorry, could not resist, just having too much fun with this.

×
×
  • Create New...