amitchla Posted January 26, 2021 Author Share Posted January 26, 2021 Thanks for the responses, guys. @GotAU? - I'll def look into the classifieds, but i want to get this figured first. I currently have a 17x9 advantage, 8" mono and 11" mono. @phrunt - it was inconsistent the last time i took it out. I did experience some wonkyness wiggling the connection near the box at one point, and then it didn't do it after i disconnected/reconnected and re-wrapped the wire. I tend not to force my way into electronics if it's not meant to be opened, but if it's an easy disassembly that I could re-solder, then I'll take a look. 1 Link to comment Share on other sites More sharing options...
jasong Posted January 26, 2021 Share Posted January 26, 2021 The cables themselves go bad too, pretty frequently actually especially if you change them a lot and wrap/rewrap. Also where the cable connects to the coil can get an intermittent open circuit if you wrap tight and then push the coil up with your foot to pinpoint or detect vertical walls a lot. 3 Link to comment Share on other sites More sharing options...
amitchla Posted January 26, 2021 Author Share Posted January 26, 2021 @jasong- is this something that can be self repaired, or is it necessary to take to a dealer? @phrunt- I'm in LA (Studio City). As mentioned, I'm super new to this, so I'm not sure if there's a reputable dealer/agent around. Anyone have a recommendation? Link to comment Share on other sites More sharing options...
flakmagnet Posted January 26, 2021 Share Posted January 26, 2021 Years ago (staring in 2005 I think), we built coil cable stabilizers for the 3500-5000's. They attached to the upper rod and to the coil cable right up next to where it screwed into the box. They worked incredibly well for stopping the wobble at the attachment point that so many of those machines seemed to have. We even wondered at the time why ML couldn't incorporate one as a part of their detectors, but no answer. I tried to find the old forum articles but no luck, too far back for the forums storage capabilities. Link to comment Share on other sites More sharing options...
mn90403 Posted January 26, 2021 Share Posted January 26, 2021 I have one of those stabilizers on my 5000 now. There were several different types offered. Link to comment Share on other sites More sharing options...
Erik Oostra Posted January 27, 2021 Share Posted January 27, 2021 4 hours ago, phrunt said: to me it sounds like something is wrong with the detector G'day Prunt.. as you know i'm also a newby on the GPX 5000.. I bought a heavily used one last month and it came with a whole load of extras (most of which didn't work - including neither of the head phones and only 1 out of the 3 loudspeakers).. But me getting ripped off again is not what sparked my query.. What I would like to know is there anyway to test an old GPX to see if it's in good working order without taking it to a dealer? All the 4 coils my detector came with seem to be working alright, even after I re-wrapped them with electrical tape to cover the worn out lengths where the internal wires were poking through).. Link to comment Share on other sites More sharing options...
Redz Posted January 27, 2021 Share Posted January 27, 2021 21 minutes ago, Erik Oostra said: What I would like to know is there anyway to test an old GPX to see if it's in good working order without taking it to a dealer? Throw a small piece of gold on the ground and pass the detector above it with increasing distance away 1 Link to comment Share on other sites More sharing options...
nebulanoodle Posted January 27, 2021 Share Posted January 27, 2021 To the OP, I'm not extremely far from you if you're in LA. Maybe we can meet up if no one else is closer and willing and we can see if we could collaborate a better idea of what might be going on. Shoot me a PM if you're interested, though we do have some rain coming I believe... 2 Link to comment Share on other sites More sharing options...
Goldseeker5000 Posted January 27, 2021 Share Posted January 27, 2021 Hey amitchla, did you try rewinding the cable with less stress on the plug? If so did it help? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now