Jump to content

Tekkna For The Deus 2, First Impression (updated 3)


Recommended Posts

On 21.02.2024 at 05:03, F350Platinum said:

Недавно Гэри Блэквелл опубликовал два видеоролика, информирующих нас о программе, которую ему представил кто-то другой - "Tekkna".

Наверняка у него необычное название и несколько действительно странных параметров.

Вот первое видео:

Идея в том, что это должно помочь вам находить мелкие монеты в местах, зараженных железом. Позвольте мне сначала упомянуть, что ни одна программа или набор параметров для D2 не являются "волшебными", хотя, на мой взгляд, "Silver Slayer" от @Rattlehead был максимально приближен к версии 0.71. 🙂 Это было для стрельбы монетами.

Сегодня я вернулся, чтобы продолжить поиск по сетке того места, где был вчера, но быстро обнаружил, что там действительно больше ничего не было, я полагаю, что это было место, которое несколько раз использовалось для собраний в начале 1800-х годов, повсюду были устричные раковины и иногда попадались большие железные осколки, я откопал пару из них, и все они были осколками чайника.

Затем я переключился на рандомную охоту, нашел еще одно действительно дрянное место подальше, включил 9 " и попробовал Tekkna. Чисто по совпадению я несколько раз взмахнул детектором и получил 87 баллов по всему мусору, Tekkna действительно звучит нечетко, когда у вас цель из цветного металла. Между несколькими странными кусками сильно продавленного железа я откопал это:

20240220_193054.thumb.jpg.07dae15690b5c730fcfc312495dfb55e.jpg

Еще одна испанская монета, № 5 в этом году. 😎 Я полагаю, что это монета достоинством в половину реала. Реверс такой:

20240220_193107.thumb.jpg.c34af09aa073f2d10b667376bd0352c6.jpg

Не на что ориентироваться, кроме размера креста, он был бы намного больше, если бы его обрезали. Початки странной формы и срезаны.

Я искал еще два часа, используя эту программу, внес в нее пару настроек, сначала уменьшил громкость железа до 8, а затем увеличил звуковую отдачу до 5. Я также снизил реактивность до 2, а не до 3, и услышал намного больше целей, но с тех пор мне попадались только кусочки свинца. Я также поставил крышки для бутылок на 3, потому что при первом использовании здесь я откопал крышку для бутылки. Я мог бы изменить это на 5, если получу другое, это действительно ничего не испортит, я нашел золото на пляже с этим на 5.

Вот его второе видео, опубликованное сегодня, в котором даются четкие инструкции по его настройке на WS6:

 

И вот, в двух словах, мои заметки по настройке на радиоуправляемом устройстве, если просмотр первого видео не поможет:

Программа Tekkna

На основе чувствительных полных тонов

Диск 42

95 чувствительность

Максимальная частота 40

Железный том 10

Реактивность 3

Звуковой отклик 4

Смещение частоты 10

Крышки для бутылок 0

Отключить

Глушитель 0

У меня сложилось впечатление, что эта программа "интересная", она точно не для 13-дюймовой катушки. Вы собираетесь использовать ее в machine gun iron, надеясь выжать еще одну цель. 😅 Вам не нужны катушки большего размера, захватывающие предметы по краям, которые могут перегружать центр.

Я уменьшил громкость iron, потому что это действительно поражает, 8 довольно удобен. Я увеличил звуковую отдачу, потому что хотел, чтобы цели выпрыгивали немного больше, и снизил реактивность, потому что чувствовал, что слышу недостаточно.

Я не думаю, что программа действительно что-то "разоблачает", она просто дает вам больше шансов найти хорошее в плохом. Из других тестов, которые я проводил в полевых условиях, я еще не видел ни одного режима D2 "снятие маски", который кажется мне мифом.

Если вы похожи на Гэри (я такой) и хотите чувствовать, что слышите все, пусть и шепотом, пока не поймаете подходящую цель, для этого это довольно хорошо работает. В куче дерьма была найдена желанная монетка. Поймите, в моем районе страны есть много испанского серебра, вы не собираетесь просто взять и позволить ему появиться. 🤣

Я почти уверен, что Великобритания сильно отличается от моей мягкой почвы здесь, в Вирджинии, но Tekkna может стать еще одним инструментом для добавления. Я не копал никакого железа, и у меня не было экземпляра, где оно могло бы быть.

Проверьте это. Очень скоро я буду тестировать его гораздо чаще и дополню его любыми другими замечаниями, которые сделаю.

GL, HH 🍀 

20240220_160755.thumb.jpg.c7374d20e8e2ca1db1001b71a2c9ff2d.jpg

Tekkna Super

20240306_101604.jpg

  • Like 2
Link to comment
Share on other sites


On 3/5/2024 at 5:26 PM, Zord said:

I think Tekkna is useless in iron infested sites. This program is based on prog. 3, which uses more agressive silencer settings, even at 0.  Why not use prog. 4 Fast? Fast is based on silencer filters from 0.71 version and is great for unmasking and separation.

The disc is set to 42 and now everything below that value is controlled by Iron Volume setting which is 10. That's major problem, because everything: ground, iron, ceramics and low nonferrous conductors -all sound at the same high level of volume 10.

That's overkill for human ear, same problem was with fulltones in D1 when hunting in heavy iron.

The reason why Tekkna was created is simple: minimal iron falsing.

People love minimal iron falsing, but nothing comes for free.

I agree with you I wrote it even before, I was skeptical but you have to try it in a real site and not in a test garden.... Adjust your discrimination and reactivity based on the location and you'll see that it works.... And I'm talking about European targets, thin medieval coins that have tid 37-38-40 in heavy iron, you will be able to unmask with this program that has as its base the number 3 that I have never used before precisely because it uses the silencer too aggressive, but you have to try it!

 

 

  • Like 2
Link to comment
Share on other sites

Well, i agree with some critic words about Tekkna.
I know about wonderful prog. 3 silenser and unmask coins in iron. But pitch square/high square will be always my № 1 in thats places and conditions.
Full tones in my opinion always lose in nails. But i love FT in modern trash sites and beach. Full tones great with high square and audio filter, but not with iron.

So i can try Tekkna in iron with pitch. I know thats discrim 30-40 great for foil infested places, for old one i prefer low disc 6-7.
The older the search location, the less discrim you need to use.
I dont need disc 42 for good sound, coz all signals with t.id >7 sounds good with pitch 🙂

Anyway all options are usable. I am always change settings and sound and try to get my best 👍

  • Like 3
Link to comment
Share on other sites

F350, I took Tekkna out for a short spin this morning. The first time I used it a couple of weeks ago, I found it "interesting", but wasn't really sold on it.  But your review and today's short hunt convinced me there is more to it then just a catchy name. I didn't find anything special but the fact that I dug 5 or 6 copper items in this worn out location really got my attention. I used Gary's stock program and only made changes to Ground Stabilty (set it to 1), and after a few minutes of detecting I lowered the Iron Volume to 8. It's a chatty program but the iron falsing is not bad. I varied the Reactivity between 2 and 4 depending on the iron but used 2.5 or 3 most of the time. The tones were pretty smooth and usually very easy to to sniff out falsing iron with a quick turn of the coil. A couple of times the tone was a bit choppy but consistant for 360 degrees. Both cases there was iron in the hole with the good target. I also left several mid tones in the ground as my time was short. I had the feeling if I had more time I would have sniffed out a nice keeper.

Just out of curiosity, I hunted with the Offset at 40 for a while. of course it made every target above the Disc sound like a silver. 😁 But that got me thinking there maybe a use for a 40 Offset in some conditions. I won't be happy until I understand why this program works as well as it does. Gary's explanation of "witchcraft" just doesn't cut it for me. 

Lodge

 

Warnik 20240309_193750.jpg

  • Like 2
Link to comment
Share on other sites

26 minutes ago, Lodge Scent said:

Just out of curiosity, I hunted with the Offset at 40 for a while. of course it made every target above the Disc sound like a silver.

Hey Lodge,

I'm going with witchcraft 😁

I turn iron volume as low as 6 depending upon how much "big iron" there is. Relic is worse with big iron. 😵

I've put disc as low as 35, haven't seen a need to change it. You'll get mid tones on most things below it anyway, I think they picked that number for a very good reason, hope someone who documents IDs will come up with it. 🤔

The only problem with Tekkna is searching a place with lots of non ferrous junk, as you see a lot of it looks good, I turn audio filter up to 5 to identify most aluminum, and lift to ignore large objects.

  • Like 3
Link to comment
Share on other sites

11 hours ago, Lodge Scent said:

F350, I took Tekkna out for a short spin this morning. The first time I used it a couple of weeks ago, I found it "interesting", but wasn't really sold on it.  But your review and today's short hunt convinced me there is more to it then just a catchy name. I didn't find anything special but the fact that I dug 5 or 6 copper items in this worn out location really got my attention. I used Gary's stock program and only made changes to Ground Stabilty (set it to 1), and after a few minutes of detecting I lowered the Iron Volume to 8. It's a chatty program but the iron falsing is not bad. I varied the Reactivity between 2 and 4 depending on the iron but used 2.5 or 3 most of the time. The tones were pretty smooth and usually very easy to to sniff out falsing iron with a quick turn of the coil. A couple of times the tone was a bit choppy but consistant for 360 degrees. Both cases there was iron in the hole with the good target. I also left several mid tones in the ground as my time was short. I had the feeling if I had more time I would have sniffed out a nice keeper.

Just out of curiosity, I hunted with the Offset at 40 for a while. of course it made every target above the Disc sound like a silver. 😁 But that got me thinking there maybe a use for a 40 Offset in some conditions. I won't be happy until I understand why this program works as well as it does. Gary's explanation of "witchcraft" just doesn't cut it for me. 

Lodge

 

Warnik 20240309_193750.jpg

I will bet that XP makes adjustments to this feature in the next update.

 

Link to comment
Share on other sites

6 hours ago, Mark Gillespie said:

I will bet that XP makes adjustments to this feature in the next update.

 

Tekkna is not really a feature, it's just a custom program utilizing an existing D2 target signal processing base program (Sensi FT in this case) and settings.  Unless you were specifically referring to one of the settings or features used by Tekkna and I misunderstood what you referring to.

Link to comment
Share on other sites

27 minutes ago, Chase Goldman said:

Tekkna is not really a feature, it's just a custom program utilizing an existing D2 target signal processing base program (Sensi FT in this case) and settings.  Unless you were specifically referring to one of the settings or features used by Tekkna and I misunderstood what you referring to.

I noticed that Gary says in one of his videos "XP don't fix it!". I see on a different YT vid by IffySignals that unmasking is not very good with Tekkna - at least if based on Sensitive FT prog 3.

I think that one of the reasons people like these settings is perhaps simply because it makes it easier to 'see the wood for the trees' in an otherwise 'busy' (audio) environment - psychoacoustics?

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...