Silver And Gold & Diamond Spinner Ring...

[cuniagau]

Ok, I need a little help on this one.  I recently dug a spinner ring on a beach.  It appears to be a very wide (about 1/2 inch wide) silver inner ring with a gold outer ring with about 28 diamonds on it.  There is a marking on the silver ring on the outside beneath the gold ring that says 925A2.  It rang high on the Equinox when I found it so I assumed it was just a silver ring.  But then I tested the diamonds and they tested positive.  I have an AuRacle AGT1 Plus electronic gold/platinum tester that has been spot on testing 10K, 14K,18K as well as silver, SS, Tungsten, and other rings as NA.  

The tester keeps saying the silver ring is 18K and the spinner ring is 14K.  I think that because the two rings are touching, it is giving me the wrong reading on the silver ring.  There are no hallmarks on the inside of the silver ring be it does have a potential makers mark that looks sorta like a clover leaf and an inscription that appears to say Be Lovziends.  I am attaching pics in the hopes that someone can tell me about this ring.  The next to the last pic shows the 925A2 but is a bit blurry.  

Thanks for looking and any info would be greatly appreciated,

Joe

PS  It air test 35 on the Equinox one way and 20 holding the ring the other.  Again, I think that the two rings together are giving off mixed signals.  

[GB_Amateur]

3 hours ago, cuniagau said:

The tester keeps saying the silver ring is 18K and the spinner ring is 14K.  I think that because the two rings are touching, it is giving me the wrong reading on the silver ring.

Can't you slide a piece of paper between them to prevent conductive contact?

Nice find!  The inside of the inner ring -- showing the hallmark, etc. -- sure looks gold to my eye, and quality at that.  But others here are way more experienced than I.  You should be hearing from them shortly.

 

[Slimpickuns]

Here ya go! 

 

https://kukkadesign.com/gb/17-be-lovriends

[cuniagau]

27 minutes ago, Slimpickuns said:

Here ya go! 

 

https://kukkadesign.com/gb/17-be-lovriends

Slimpickuns,

I don't know how you found that site but I really appreciate it.  I have Googled, Binged, Yahooed and several other browsers and had come up empty handed.   The white Rhodium explains part of why the electronic tester wasn't reading it correctly too.  White Created Sapphires I guess read as diamonds too.  Interesting! 

I will toss it into the silver pile now that I know it only has gold plating on part of it.  12.8g of silver is still a pretty good haul for a silver ring!

Thanks again,

Joe 

[Joe D.]

Cool find! Haven't seen any quite like that before! 👍👍

[cuniagau]

1 hour ago, Joe D. said:

Cool find! Haven't seen any quite like that before! 👍👍

I have never seen one before either.  That is what so much fun about this hobby, something new all the time!

[Joe Beechnut OBN]

On 7/23/2020 at 9:18 PM, cuniagau said:

Slimpickuns,

I don't know how you found that site but I really appreciate it.  I have Googled, Binged, Yahooed and several other browsers and had come up empty handed.   The white Rhodium explains part of why the electronic tester wasn't reading it correctly too.  White Created Sapphires I guess read as diamonds too.  Interesting! 

I will toss it into the silver pile now that I know it only has gold plating on part of it.  12.8g of silver is still a pretty good haul for a silver ring!

Thanks again,

Joe 

Beautiful Gold ring cuniagau! And I agree on finding that ad for the ring..I looked also, said they can't be to hard to find...Well I never did...Nice find Slim!

[Skull diver]

This tendancy to make modern rings with "alternative"plated metals and fake stones is disgusting me😨.

How misappointing can be to find that beauty, to discover later it is next to a costume jewelry piece?

Still a good find for you in the USA 😉

The silver price here is ridiculous.