Carolina Posted March 17, 2022 Share Posted March 17, 2022 22 minutes ago, midalake said: Thanks Chase, I am going to plug in directly alright. However it will be with my Black Widows or a pair of Eisenhower's........... I bought a ip 68 connector and cord for my pro golds. Not a big fan of wireless but do have a set of Quest phones for the WS6.. I stand corrected on the 11” coil. I also moded my antenna wire thru the shaft. I coiled it similar to the CTX so I can open and close for transport. I also have a CF straight shaft on the way. We shall see how that works out. Link to comment Share on other sites More sharing options...
midalake Posted March 17, 2022 Share Posted March 17, 2022 2 hours ago, Carolina said: I bought a ip 68 connector and cord for my pro golds. Not a big fan of wireless VERY NICE work!!! Like the rubber grommet on top. Do you have a rubber grommet on the bottom too? Can you share where you got the ip68 at??? Tony said there are supply issues. Link to comment Share on other sites More sharing options...
Carolina Posted March 17, 2022 Author Share Posted March 17, 2022 2 hours ago, midalake said: VERY NICE work!!! Like the rubber grommet on top. Do you have a rubber grommet on the bottom too? Can you share where you got the ip68 at??? Tony said there are supply issues. Thank you DigiKey Electronics. Stock opening of shaft needs no grommet. Link to comment Share on other sites More sharing options...
Carolina Posted March 17, 2022 Author Share Posted March 17, 2022 1 minute ago, Carolina said: 2 hours ago, midalake said: VERY NICE work!!! Like the rubber grommet on top. Do you have a rubber grommet on the bottom too? Can you share where you got the ip68 at??? Tony said there are supply issues. Thank you DigiKey Electronics. Stock opening of shaft needs no grommet. Coiled antenna wire. Link to comment Share on other sites More sharing options...
Skull diver Posted March 17, 2022 Share Posted March 17, 2022 12 hours ago, Carolina said: We shall see how that works out Nice and clean setup.. I'm waiting for a straight shaft too, so for now I'll keep the original one like it is to avoid it soon as I can... For water and underwater use, I tested this morning with success the beach P11 with minor tweaks. Even if salt sensitivity was the right proposed factor to tune, I soon realized that higher reactivity up to 2.5 is mandatory to don't get crazy among noise. With 95 general sens., 9 salt sens. and 5.9 disc I was fine with it. Beach Sensitive in the water is just unusable, neither Beach P, unluckily. Link to comment Share on other sites More sharing options...
Bill (S. CA) Posted March 23, 2022 Share Posted March 23, 2022 Love this mod, perhaps XP will incorporate something similar. Makes total sense. Well done. Link to comment Share on other sites More sharing options...
Welwood470 Posted March 24, 2022 Share Posted March 24, 2022 On 3/17/2022 at 2:10 AM, Carolina said: Coiled antenna wire. Just curious, what did you use to coil the antenna wire? Looks like maybe a wooden dowel? Link to comment Share on other sites More sharing options...
Carolina Posted March 24, 2022 Author Share Posted March 24, 2022 14 hours ago, Welwood470 said: Just curious, what did you use to coil the antenna wire? Looks like maybe a wooden dowel? It is a small wooden dowel. You must heat the antenna with a heat gun ( like pvc heat gun or Wagner paint stripper ) not sure if a hair dryer will work. Being careful not to burn. Heat wire and then place in freezer for 15 min. Repeat this 3 times total. Then remove from dowel. Link to comment Share on other sites More sharing options...
Welwood470 Posted March 24, 2022 Share Posted March 24, 2022 6 minutes ago, Carolina said: It is a small wooden dowel. You must heat the antenna with a heat gun ( like pvc heat gun or Wagner paint stripper ) not sure if a hair dryer will work. Thanks Carolina, my D2 will be in next week. Looks like a good plan to me. Link to comment Share on other sites More sharing options...
Carolina Posted March 25, 2022 Author Share Posted March 25, 2022 Made these MSA left/RIGHT phones for my friend John. Dang muffs nearly doubled in price from several years ago. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now