RickUK

A very nice find for sure,like yourself the identity of the ring is a bit of a mysterious one for sure....in theory as it has no hall marks it should be old but not always the case as it could have been a special commission,also older rings like posy or for nobility would and usually have a inscription inside but that is not the case here.....is it medieval ?? pure gut feeling is telling me no as it looks like a modernist design. It will be interesting to hear back from the FLO and see what they say about it,it certainly is a fabulous find and well done on connecting your detector with it and saving it.I seriously hope its a very old ring but gut feeling tells me otherwise.

In 'theory' a very good idea,but how many twin boxes units are sold around the world as it is a specialised piece of equipment,they do what they are supposed to do and not your everyday type of detector so my personal opinion is they may have not as many sales as what they think they will get......this add on twin coil set up on top of the original high cost of buying a Deus2 has to be a crazy amount over say a normal Deus 9'' or 11'' coil,so they will sell some but certainly not in high volumes.......not for me alas i will stick with my Fisher TW-5 twin box which i brought almost new for sub £200 that will do the same as this new Deus hoard coil.

Still own my DFX that was in the 1st batch that came here in the UK,wont ever part with this machine has done me proud over the years,also have a decent condition IDX Pro but dont use it as much as i thought i would and then my as new off the production line TDI Pro these are getting harder to find these days and still in my opinion terrific Pulse machines.....although i still own these Whites machines and also alot more modern machines still my all time favourite detector is my original green T2 that has found me more gold and silver milled and hammered coins than all my other machines put together.

I always carry a spare set of the Blue XP wired headphones with me when ever i go out,they are very cheap,lightweight,fold down into a very small space and the audio quality from such a cheap backup set is absolutely amazing and of course very good during the hot summer months as well.

Not been able to login for a long time,not loosing any sleep over it either 🙂

In situations like that i would tend to use a much smaller coil,so you dont get the ground coverage but when you have so much junk you have the high probability of target masking ie 2 targets under the coil at the same time but the discrimination is knocking out both targets,so this why my personal opinion a small 6 coil could well be the best way forward.

The main thing is as long as you are happy with this new wonder machine and it works for you and you are Happy spending that amount of money then that is the main thing,but everyone else on this forum knows different and that is why they wont be buying one. Good luck and hope you find the Holy Grail of finds.

In theory it sounds interesting,but in reality would not be the best way forward as single freq machines are not the best option for wet beach sand,so in my mind it would be a total waste of time....the best way forward if you want to do your own coils would surely do a PI kit which can be purchased pretty cheap infact very cheap and then make the coil which is pretty easy and alot easier than VLF coil designs. All ready that has been suggested is the Geotech1 forum,some serious electronic boffins on that forum,regarding the Gold Bug2 i personally think it would be a total waste of time going down that route.

A very interesting piece of kit from the advert Blurb,i am very very sceptical about all these claims,it may do exactly what it says on the tin,and i seriously hope it does for you because of the massive outlay. I am trying to be very diplomatic about this,if as the advert states it will find amazing treasures and also at amazing depths etc,why dont you see normal everyday folks using them and finding the Holy Grail of finds,thats a easy answer they dont work that good as if they had been good they would become a best seller almost over night irrespective of the high price. Hope that you do find out how to get the best out of this machine but i seriously think you will struggle,just hope that i am wrong and you are right.

Some very good videos,my 2 favourite coils for the Nexus MP are the small 8x6 DD coil which stays on the machine 85% of the time and also the 11.5'' Concentric coil,the latter coil is very good for trashy roman sites and especially silver hammered coins as well.

These screens dont still have the clear protection still on the control box do they and need peeling off,as that is what i have found over the years they give the same appearance as air bubbles under the screen.

Newer is not always better 😉

Joe,a massive welcome to the forum.

Welcome to the forum.

That Viccy 1/2 Sov is a fabulous looking coin,have found both fully and 1/2 Sovs here in the UK,very well done and hope you find some more near by.

As i all ready had the ML 15x12 coil i could see no reason to buy the CT one as basically i would be doubling up and also heavier into the bargain,so glad that i did not purchase the 15'' round coil. Must admit although i have had my Nox for may be 4 years or so,have never really liked it,it just does not do anything for me,although i wont sell it as it could come in handy for the odd days beach detecting etc,but decided to put the 15x12 ML coil back on it and run it in 4khz for when i am on pasture sites and i get a gut a gut feeling that items could be slighly deeper and also the ground coverage especially when i am on a club dig and we only have say 8 hours to hit the site then that is when the larger coil earns its keep.

Folks i have had my Nox a for maybe 4 years,i rarely use it if i am honest,but one that i have still not fathomed out yet is what difference does the 1 khz do on the frequencies ?? I am totally aware that lower freq's go deeper and the Nox originally came with the 5khz as the lowest freq and when coupled with the larger 15x12 that would give you greater depth,but when the update was available the lower freq was reduced to 4khz which i installed that update,but still cannot fathom out why or how just 1 khz can make a massive difference or am i missing something here. As i dont use this detector as a everday machine,i am plan on using it with the 15x12 coil for deeper larger artefacts.

I brought my Compadre Control box almost brand new and that had just had the 5 pin connector conversion and the price was crazy low so snapped that up about 5 years back,mounted it on a spare Tesoro shaft and added the 4'' concentric coil to it,not a great amount of depth with that coil but its target separation and getting around tight spaces what this combination is all about.....must admit its getting used less and less this coil as i am using the 5'' coil on my T2 for the same type of use but its alot deeper.

As Tesoro has been closed for a few years,i would say that dealers who had them in stock have or nearly sold out,best bet would be do a search for one on Ebay as that would be about your best bet.I still use mine but not as a everyday coil more of a specific use coil and it basically stays on my Compadre which i had converted to a 5 min detachable coil rather than a hard wired one,also these small 4'' coil can make decent pinpointers as well on a cut down shaft.

I personally think you are over thinking about pinpointers,they just help you locate a find when just say a inch or 2 away from the pinpointer,i have never had any issues regarding ground with high mineral content.....my original Black Garrett still keeps working after many many years of hard use and never let me down,i brought a new XP Mi-6 probe about 12 month back and never used it,if my current Garrett one finally dies i will get another one the same.

That is a neat bit of kit,never seen one before but that off road ability looks amazing,well done on getting it all fixed and back on the road again.

If you find a larger piece of this meteorite then the 'sky is the limit' price wise,the lucky finder would be over the moon and out of this world 🤣🤣🤣

Steve,i seriously think this is a wise move,and will eliminate all the potential spammer,all the genuine folks who apply to join the forum wont mind at all,but the initial hurdle that will be in place should eliminate the majority of spammer.....so yes this suggestion from you gets my approval.

The T2 is my all time favourite detector and have had it many many years,its a shame that they have not brought out a MF machine....i would have thought that if they had something special in the pipe line to go head to head with say the Nox or Deus or any other of the MF manufactures they would have done so before know. This is just my personal opinion and pure gut feeling but i dont the Fisher/First Texas garden is rosy at the moment and unless they bring out something that will blow the opposition out of the water they could well struggle to stay afloat....of course this is just my opinion but my gut tells me i am right.

Never had any issues with my original Garrett pinpointer,out every week and it still keeps going,when this one finally gives up the ghost i will certainly buy another new Garrett but saying that i do have a brand new XP mI-6 pinpointer which i have never used but have had it as a backup for nearly 12 months. Not worried about the XP probe as i brought it half price bran new so could still sell it for much more than i paid for it,but have tried it out on my Deus and it does work well so will keep it.