Norm S Posted June 7, 2018 Share Posted June 7, 2018 I sent my F-Pulse back for a full refund. It had to be defective and I just didn't like it. Not knocking something that didn't work because I have read many positive reviews and if Steve H says it's good I am sure it is. I am just not going to risk waiting for another one. Profind 35 here we come Link to comment Share on other sites More sharing options...
Johnnysalami1957 Posted June 20, 2018 Share Posted June 20, 2018 Got it! Loved it! It broke after 4 hrs. Intermittent shutdowns. Sending to Fisher for a new one. I am oddly missing it..... Link to comment Share on other sites More sharing options...
Dubious Posted June 23, 2018 Share Posted June 23, 2018 I have been trying out the F-Pulse, but having a lot of trouble with falsing, to the point that I wonder if the unit is defective. When it begins falsing, I do the touch-to-earth-and-hit-button to re-balance, but often 15 seconds later the falsing is back. Link to comment Share on other sites More sharing options...
relicmeister Posted July 1, 2018 Share Posted July 1, 2018 After using my F-pulse for a couple months, I just can't seem to get through a couple of successive detecting outings without some annoying issue. The issues I have had lately are 1. Unit will make semmingly random loud beeps while using inside a hole and I've wondered if it is the alarm it makes when you forget to turn it off. 2. Unit will beep slowly all the while when seeking a target in a hole. I havnt tried a retune while touching bare ground enough to see if it's a fix. 3. It seems to freeze up about once per time out with it, so that's as annoying as changing batteries with each use. All considered, I'm about ready to put it up on eBay. I'm just not accustomed to so many issues as compared to the Garrett carrot, pp11 or original pp. Link to comment Share on other sites More sharing options...
Steve Herschbach Posted July 2, 2018 Share Posted July 2, 2018 I have to admit I am feeling a bit lucky after reading some of the issues people are having, especially since my F-Pulse was an early one. Sounds like there have been upgrades since. Two software versions. I am in bad ground and if I do not put tip to ground when firing the unit up it will slowly beep in the hole. A quick tap on the button with tip to the ground will also tune the ground out if I forget. Everything else however sounds like bugs or bad units. I am sorry you folks are having problems. It is a shame so many new detector’s and pinpointers bite people in the butt in the early months, especially when it is the most loyal customers/early adopters that get bit. Link to comment Share on other sites More sharing options...
☠ Cipher Posted July 7, 2018 Share Posted July 7, 2018 I have a later model Tek-Point, and I love it. I prefer a powerful, sensitive pinpointer just like I prefer a powerful, sensitive machine. With great power come more quirks. I've become accustomed to those quirks after using the TRX for so long. Different technologies, but same principle. The more power you put out and take in the more response you'll receive from your environment, wanted and unwanted. Coming from a carrot to a Tek-Point or F-Pulse is like going from an AT-Pro to an early F75 LTD. Some people were not able to harness the high gain and sensitivity after coming from such a well behaved machine like the AT-Pro. Also high EMI environments caused instability. The later DST brought more stability to the F75 in high EMI environments, but also sacrificed some depth and sensitivity. It could be that some of what people are experiencing is the natural consequence of maxing out a powerful pinpointer and scaling it down to a lower level will make it more stable. The power is still there if you can use it elsewhere. I don't know this to be the case for those having issues, but just a thought. I'm absolutely loving mine. Link to comment Share on other sites More sharing options...
“Spartan800” Posted August 9, 2018 Share Posted August 9, 2018 It sucks that detectorist are experiencing these glitches with the f-pulse. I did a bit of testing on underground plumbing areas and found that the pulse induction HITS HARD on bigger metal objects from at further distances. Case and point: if there’s a treasure chest in the ground the PI from f-pulse will most likely hit on it because of how large it is. But most people won’t dig the first foot of dirt thinking it was just falsing the whole time. when I’m next to metal picnic tables the f-pulse starts sensing it from 5ft away. Link to comment Share on other sites More sharing options...
Skeleton Coast Hunter Posted August 10, 2018 Share Posted August 10, 2018 Have to concur with Cipher... beach conditions round my parts of the big pond are very challenging... Recently switched over from the Carrot to the Tek Point and in my specific conditions the Tek beats the Carrot hands-down.. Very stable....no issues...no fuss...finds the sweet spot quick ? Link to comment Share on other sites More sharing options...
Johnnysalami1957 Posted August 25, 2018 Share Posted August 25, 2018 On 6/20/2018 at 7:06 PM, Johnnysalami1957 said: Got it! Loved it! It broke after 4 hrs. Intermittent shutdowns. Sending to Fisher for a new one. I am oddly missing it..... Got a new one with the latest software. Staying on now and seems fine. Pretty fast turnaround and I hope it stays good because I like it. Link to comment Share on other sites More sharing options...
GB_Amateur Posted August 28, 2018 Share Posted August 28, 2018 On 7/2/2018 at 12:48 PM, Steve Herschbach said: Sounds like there have been upgrades since. Two software versions. If buying now, how do you know you're getting the 2nd version? Is it simply trusting the dealer to know when you ask? (Guess that argues for finding a knowledgeable dealer, and then sticking with him/her.) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now