Jump to content
Steve Herschbach

Amazon #1 Bestseller In Metal Detectors

Recommended Posts

It changes constantly but right now that would be the Bounty Hunter TK4 Tracker IV Metal Detector

Only $91 and actually pretty highly rated. We always tend to obsess over power on the forums but sometimes it is good to realize the bulk of the market is made up of people with fewer ambitions than most of us. I assume a lot of these are just something to put in a box as a gift for a child.

Before people laugh and say this is a toy, the fact is the Tracker IV completely blows away my very first detector (1972 White’s Coinmaster 4) for power and features and about a third of what I paid decades ago. 

3BB453BC-7957-42D0-95CC-E8F0C530B7F4.jpeg

  • Rugged metal detector ideal for detecting treasure in extreme ground conditions
  • Motion All-Metal mode, Discrimination mode, and 2-Tone audio mode
  • Preset ground balance neutralizes response to mineral content in the ground
  • Disc/notch control distinguishes between targets and unwanted metals
  • Rugged metal detector ideal for detecting treasure in extreme ground conditions
  • Motion All-Metal mode, Discrimination mode, and 2-Tone audio mode
  • Preset ground balance neutralizes response to mineral content in the ground
  • Disc/notch control distinguishes between targets and unwanted metals
  • Ships in Certified Frustration-Free Packaging

B8C0F4AE-86AF-41DF-8D88-E91E5E6EEDFA.jpeg40EEA7A0-FCF2-45CE-B66E-2A1A033D90A5.jpeg

  • Like 3

Share this post


Link to post
Share on other sites

Now if the people who buy that detector had some Proper training in regards to detector and target recovery etiquette .......

 

  • Like 3
  • Thanks 1

Share this post


Link to post
Share on other sites

My first detector was a White's Alaskan TR chest mount... It came with 2 coils... I forget what I paid for it ..

https://www.whiteselectronics.com/wp-content/uploads/2016/07/gm_alaskan_disc._instruction_manual.pdf?lang=us

Share this post


Link to post
Share on other sites
53 minutes ago, johnedoe said:

White's Alaskan TR chest mount

Believe it or not I still have one of those - with two coils! I will post pictures one of these days. I have actually been meaning on taking it out for a spin. It is not my original but one I picked up courtesy of my old White's rep, Mary Gladding.

  • Like 1

Share this post


Link to post
Share on other sites

Ha ha.....I have a Tracker IV. Was the 2nd detector I ever got, & the first one brand new. Still got it. Found me many items on the beaches. I actually got the tiny little "gold" coil for it but have never used it for gold. Only gold rings on the beaches. :biggrin:

JW :smile:

Share this post


Link to post
Share on other sites

The Tracker IV was my first metal detector.    I still like it.    Sometimes a low gain unit is very helpful.

Mine found this ring earlier in the year.

Mike

TIVGOLDRINGe.jpg

  • Like 7

Share this post


Link to post
Share on other sites

I have to give props to the Bounty Hunter... the Discovery 2200 was purchased for my son as a gift, and it got me hooked on detecting.  We found some nice targets with that "beginners' detector.  :)

Share this post


Link to post
Share on other sites

Steve, I think I've got you beat on the lowest common denominator detector. 

I had a radio shack orange detector when I was maybe 7 years old. This isn't mine - just a pic from the web. The only setting that detector had was a volume knob. It worked and I caught the bug that I've never been able to shake.

IMG_0016.JPG

  • Like 3

Share this post


Link to post
Share on other sites

I still have an old radio shack detector I got as a gift and I won't part with it. Once I learned to use it I found over $300 in clad with it then I bought an Ace250 that paid for it's self in a month.. After that I was hooked

Share this post


Link to post
Share on other sites

haha, i have that exact same detector it's orange and all, it was from Dick Smith in Melbourne (Australia), I got it on a holiday there when I was about 9 years old.  It's out in my garage, in fact it's what inspired me to get into metal detecting about 6 months ago as my daughter lost her toy metal thomas the tank engine train in the schools sandpit and they spent about an hour trying to find it, I said i've got a metal detector out in the garage somewhere, lets try that to find it, we dusted it off, put in a 9v battery and off we went to the sandpit.  It found the train in about 2 minutes.  It saved a lot of tears!

It's a piece of crap but I love that old detector, it's one of the few "toys" I have left from my childhood.

 

 

 

 

 

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Tnsharpshooter
      http://www.dankowskidetectors.com/discussions/read.php?2,149502
      This data below was posted by same gent who responded above on Apr 22 2018.
      LE.JAG Wrote:
      -------------------------------------------------------
      > Hello,

      > some news on Fisher Manta
      > after using, the most powerful pulsepower
      > deepstar, SSV3, Aquastar, Goldscan 5c

      > I can tell you that Fisher Manta is deeper
      > and more sensitive with its 7us delay

      > the total weight should not exceed 1.5 kg
      > the Fisher team is currently working on the mechan
      > ical part
      > new box, cane, new coil....

      > the high sensitivity of the 7us requires materials
      > accordingly
      > solid disc with specific resin
      > winding and shielding of very high quality
      > high-end cable also for shielding ....

      > all this add to a waterproof version
      > requires more time for mass production than a conv
      > entional detector

      > once the mechanical part is fully operational
      > the first pre-series will not be long
      > and here I guarantee you the greatest depth
      > that you will never have seen on a ring at the be
      > ach

      > if you hunt in the hard, look for a very solid gam
      > ate !!!!  (:P)

      > will follow the Terra version for the nugget
      > and this is just the beginning, Alexandre and the
      > research team
      > is already working on other technologies
      > who will revolutionize the world of gold diggers
    • By Steve Herschbach
      My VLF detectors are rapidly sorting themselves out and I am satisfied I am doing about as good in that regard as can be done. There really is only one area of metal detecting left that is bugging me.
      The Garrett Infinium was the first waterproof ground balancing PI and not a bad first effort. White's TDI might have improved on it but White's never did a waterproof TDI. Surprisingly, Minelab has never done what I would consider to be a true waterproof saltwater beach hunting PI. The SDC 2300 really is a prospecting detector first and second. I finally ended up with the Garrett ATX, which currently sets the bar for a waterproof ground balancing beach and water detector.
      Yet the ATX housing was designed more for military use than beach detecting. The coils are overly expensive due to an integrated rod design. Worse, the detector weighs in at 6.9 lbs and cannot be hip or chest mounted.
      In a sign of faith I am going to sell my ATX and wait on whatever First Texas has in the works. As Rick Kempf posted here previously, First Texas hired Alexandre Tartar and purchased the rights to produce a version of his Manta PI Project. And to quote First Texas engineer Carl Moreland from this thread "Yes, we've hired Alexandre. Yes, we are working on PI. I was personally working on PI before hiring Alexandre, but now we are seriously working on PI."
      Another thread with Fisher Manta details
      Fisher has not made a PI since the Fisher Impulse was discontinued back around 2013. This collaboration with Alexandre Tartar gives me hope that First Texas can get something out in the next year or two. My bar is low - a waterproof ground balancing PI at least as good as the ATX in a more ergonomic package. Seems fairly doable. Another company that may come out of nowhere all the sudden is Nokta/Makro as we know they are working on a PI. I don't know, but I think this is First Texas' game to lose at this point. So there you go, ATX going up for sale and a spot held open for whatever company can meet the challenge. Good luck First Texas - I am rooting for you!
      https://youtu.be/G8sdp4RG73g
    • By Tnsharpshooter
      The following is a compilation from my Rutus testing and useage.
      Very long, but anyone wanting some info, this here may help folks.
      Btw to my knowledge currently no dealers for this detector line in USA.
      They can be purchased from abroad.
      The Rutus Alter 71 may not be very well known, but make no mistake a very good detector for what they cost.
      There is some comparison info too with other detector models.
      Enjoy
      Overall weight and feel of unit is IMO nice,,not heavy feeling.
      Both coils.
      Btw. Concentric measures 8.125" outside to outside diameter.
      Supposed 11" dd measures 11".
      I even with little time I have run this unit,,this unit designed to be a Deus killer for the $$$.  Question is, is it??
      Using concentric coil user likely not to dig steel bottle caps, hodograph paints a good pic of junk target,,a backwards C in the meter. Haven't tried DD coil yet to see what happens here.
      Depth is dependent on mask setting,,meaning for fringe depth the lower the better.
      Interesting how they gave a user options here to have their targets ID in the meter.
      Three choices real-- ID is directly reflective of frequency run and conductivity of target.
      Then 2 other options,,you can select either 6khz or 12khz for target ID normalization.
      So with saying all this here is some data using each of the above selections for target ID.
      I should say the Rutus uses a different scale when comparing to most other detectors-- 0-120.
      Some data
      Real ID option selected and frequency selected on detector at max 18.4khz
      Nickel....79
      Clad dime..110
      Zincoln penny..103
      Copper penny..110
      Clad quarter..114
      Normalized setting of 6khz selected,,detector still set to 18.4khz
      Nickel..52
      Clad dime..94
      Zincoln penny..80
      Copper penny..94
      Clad quarter..105
      Normalized setting of 12kh selected,,detector still set to 18.4khz
      Nickel..66
      Clad dime..105
      Zincoln penny..95
      Copper penny..105
      Clad quarter..112
      Frequency changed on detector to 7khz,,real ID option selected
      Nickel..55
      Clad dime..99
      Zincoln penny..86
      Copper penny..99
      Clad quarter..107
      Frequency still at 7khz,,6khz normalization selected
      Nickle..54
      Clad dime..98
      zincoln penny..85
      Copper penny..98
      Clad quarter..107
      Frequency still at 7khz,,12 khz normalization selected
      Nickel..68
      Clad dime..108
      zincoln penny..99
      Copper penny..107
      Clad quarter..112
      Preliminary test using 3D test with coin and nails,,detector seems above average with what I see,,,Deus like results,,,not giving either detector yet no advantage,,with time maybe.
      Audio,,,Rutus audio not as smooth as Xp Deus,,not as blendy sounding,,leans more toward what I call beeps.  This is not meant to say Rutus audio is terrible or anything.
      I am still trying to nail down how I want my tones set up using the user programs,,,not there yet.
      Does take time though,,user must select each number TID wise and singularly adjust,,,no blocking of groups of tones to adjust.
      I do reserve the right here to correct anything I say about this detector in the future.
      From what I can tell right now,,Rutus will retain settings when turned off.
      Turn back on,,user will need to ground balance though.
      Also what ever you have selected,,this is where the cursor will be when you go back in and open menu-- not sure if this happens if you turn detector off though.
      Now,,here is where other manufacturers like White's should be paying attention,,Xp as well.
      I have read countless Internet forum threads and post associated with just when does the White's V3i and even the Vx3 model need to be ground balanced.
      Rutus depending on what you change setting wise will give you ground balance prompt.
      This is exactly what White's should have done on the 2 models I mention here.
      Xp Deus,,you change freqs,,ground balance doesn't carry over,,should be a prompt..
      Now detector companies,,if they do this for future models,,,they could offer a way to override the prompt,,so it doesn't appear in screen.  This might be more handy for someone say who is more experience with the detector in question.
      Emi,,this detector ranks right up there as being one of the quietest I have run for Vlf,,,even runs as quiet IMO as CTX and etrac,,and DST Fisher units.
      Now this from judging in 2 different places with loads of light wires,,and a few transformers.
      I should also say,,this concentric coil I received with Rutus is the very first one I have ever owned,,I did run a gents White's XLT with concentric some 6 years ago for around 15 minutes.
      Navigating around using Rutus is different,,but not hard,,just gotta get used to it.
      Unit seems to ground balance nicely here in my soil.  
      More to come.

    • By phrunt
      So I was watching the first episode of the new Season 3 of Aussie Gold Hunters, my favourite gold prospecting TV show and the Gold Gypsies on it appear to be using some odd looking new detector, last season they were using GPX 4500/5000's I believe but this season it's some detector I don't recognise, It sounds like a GPX that's sucked on a helium balloon 
      It doesn't appear to be a Minelab as Minelab tends to put their branding all over things, I can't see any branding on this detector, is it some sort of QED? Even the coils have no branding.  It looks like you can adjust the balance on the coil by sliding it back or forwards before tightening the nut.
      I really like his pick too that you'll see in the photos, It's nice and sharp up the front but goes extremely wide at the back for good scraping, I wonder what that pick is, I would like one.
      Any ideas?
      --- Update, it's been cleared up already, its a Garrett ATX 🙂  Thanks AU_Solitude  

       
       
    • By Reg Wilson
      Lanny, there is a super light weight PI built here in Australia, at a good price. I use one and love it. Unfortunately it is not yet available in the USA. It is called the QED. It is being constantly improved by the dedicated inventor. Hope one day you will be able to get one.
    • By eftihis09
      Does anyone have information about the Goldseekers VLF 12000 metal detector? Manual, spare parts...
       


×