F350Platinum Posted October 6, 2021 Share Posted October 6, 2021 The corn is harvested here, time to get out in the fields. I've been wanting to search this particular field right next to an old farmhouse where I dug some silver coins. Right up next to it I dug one IHP and a colonial button, figured there might be more in the field. I'd say it's about a half acre, don't know why they bother but a field is a field I guess. Yesterday was one of the last hot and humid days we can expect here, so why not be miserable for a few hours? 😀 The end of the field the photo was taken from is where I dug the coin and button, as you get closer to the hunt club building it's mostly beer cans. They haven't tilled this field and they probably won't, most farming here is "no till". They may run a bush hog around the edges but that's it. Used the 10x5 coil as usual, it's especially good in corn stalks. I found that swinging it ahead of me on an angle is better than back and forth. I made a short video but don't see .MP4 uploads. In 4 hours I got some clad, one coin spill gave me a quarter, nickel, and Zincoln. The other quarter was up near the hunt club. On the "good" end of the field I dug a 1944 wheat. Near that I got a 25, thought I'd get another IHP but to my surprise I dug an old brass ring. I know it's a ring because of the crown on the metal, doubt it's a compression fitting ring. Sad there was no makers' mark or inscription, but I don't want to scrape all the crud off. As it is something put a nick in it. It does not bend. Here is a closeup of the ring: And here is the trash, one iron relic looked interesting, kind of a hook with a loop. I threw all the beer cans and slaw in the handy dumpster. The shell is a high power .17 caliber. Not sure how old the ring is, so I thought I'd post it. Link to comment Share on other sites More sharing options...
ROCKINGCM Posted October 6, 2021 Share Posted October 6, 2021 That looks like a terrible place to swing a coil. I can imagine falling and getting impaled by a cut stalk. Cool ring find! Link to comment Share on other sites More sharing options...
kac Posted October 6, 2021 Share Posted October 6, 2021 Not bad at all, personally I hate hunting around corn stocks LOL. I found a few brass and copper rings in areas that were busy in the 20's-30's. May have been plated at one time. Link to comment Share on other sites More sharing options...
Joe D. Posted October 6, 2021 Share Posted October 6, 2021 I just had to read up on "no-till" as I really had no clue! Where I go in Georgia, everything is still tilled! That's how we find arrowheads and pieces, usually every year! "Maybe" environmental sound, but sucks for detecting and sight hunting!!👍👍 Link to comment Share on other sites More sharing options...
F350Platinum Posted October 6, 2021 Author Share Posted October 6, 2021 1 hour ago, ROCKINGCM said: That looks like a terrible place to swing a coil. I can imagine falling and getting impaled by a cut stalk. Cool ring find! It's not too bad, got my balance down hunting over soybeans last year. Just can't swing much unless you're on a wheel track. Just giving y'all something to read while working! 😀 Link to comment Share on other sites More sharing options...
F350Platinum Posted October 6, 2021 Author Share Posted October 6, 2021 Junk Link to comment Share on other sites More sharing options...
F350Platinum Posted October 6, 2021 Author Share Posted October 6, 2021 Went out there this morning and found a 1916 D penny, it was on top of the ground. Really wish these people had lost more silver🤬 Link to comment Share on other sites More sharing options...
Joe D. Posted October 6, 2021 Share Posted October 6, 2021 They didn't "lose" it! It's all buried in Mason jars, too deep for your detector! And not being hit by plowing!!🤣👍👍 Link to comment Share on other sites More sharing options...
Old Line Paul Posted October 6, 2021 Share Posted October 6, 2021 4 hours ago, F350Platinum said: Sad there was no makers' mark or inscription, but I don't want to scrape all the crud off. As it is something put a nick in it Do you have an ultrasonic jewelry cleaner? I bought a $35 home model. I’ve had mixed results. I tested some worthless items first, and found if you zap them too long you can mar the finish of some coins and knock loose paint/plate finishes. I’d be afraid to use it on something truly valuable. And you definitely need warm water and some cleaning solution to get the best results. But if you zap things in short bursts and use a soft toothbrush between zaps, it can remove caked on grime in tight places. Link to comment Share on other sites More sharing options...
Joe D. Posted October 6, 2021 Share Posted October 6, 2021 Hey Paul, I just bought one recently too, and tried it on some coins this week! Same thing, mixed results! I cleaned my "good" coins first, separating the types, with a mix of distilled water, a few drops of liquid detergent, and some peroxide, for about ten minutes! Those were a "little" better! Then did clad, then pennies! Did not really do much for those! I think I will just use it on jewelry from now on! I've had better luck with other methods, just soaking!👍👍 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now