Jump to content

Equinox, Micro Nuggets


Condor

Recommended Posts

I've been laid up for over a week with the friggin flu, but JW's finds with the Equinox inspired me today.  A sunny 78 degrees in the Desert Southwest, so I decided some fresh air and detecting were in order.  I picked a spot for easy access and easy walking, not wanting too many challenges to my recovery.  An old hillside placer that we had found a number of tiny nuggets with the 7000 seemed like a good prospect.  I plugged my earphones directly into the the Nox and ran the Gold 2 program with no discrimination.  I jacked the sens to max and just puttered along, low and slow.  I picked up these 4 micro nuggets for about 2 hrs effort.  None of them registered a VID, just a barely repeatable tone.  The biggest was down maybe 2 inches and gave a nice steady hum.  The others were less than an inch, just a squeak of a tone.  The hillside was fairly flat, so I was able to manage some decent coil control, otherwise the Nox at full power will false with every bump. 

You'd have to be pretty bored to make this kind of detecting a habit, but it served its purpose today. 

007.jpg

Link to comment
Share on other sites


Good job there precious.....:biggrin:

I went back to the beach today---- Zequinox is deadly on quarters, dimes, nickels and pennies---- oh thats about all of them....man i dug one quarter that was over a foot deep-- i have a video of the hole i will add later.....

I am glad to hear that it is hitting on that small gold--- i will take it to australia this year instead of the Monster and see if i can get some time in on some steep washes... (the 7000 kills me on those wash walls)

Oh yeah---there isnt a bottle cap the Zequinox doesnt love!!!!!!! Man it hit like crazy on them.

So was the 800 pretty stable out there today??? How's EMI?? Have you notice any at all???

TTYL tater..

29_VID_DEEP.mp4

Link to comment
Share on other sites

1 hour ago, vanursepaul said:

Good job there precious.....:biggrin:

I went back to the beach today---- Zequinox is deadly on quarters, dimes, nickels and pennies---- oh thats about all of them....man i dug one quarter that was over a foot deep-- i have a video of the hole i will add later.....

I am glad to hear that it is hitting on that small gold--- i will take it to australia this year instead of the Monster and see if i can get some time in on some steep washes... (the 7000 kills me on those wash walls)

Oh yeah---there isnt a bottle cap the Zequinox doesnt love!!!!!!! Man it hit like crazy on them.

So was the 800 pretty stable out there today??? How's EMI?? Have you notice any at all???

TTYL tater..

Go ahead and take the equinox to oz. Just leave the 7000 here with me and ill make sure it finds enough to finally be paid off. Lol. After im done i will forward it to oz thru Fedex. Lol

Link to comment
Share on other sites

Not yet Fred-- they are a 14 just like gold rings

detectorcomparisons had a youtube on the CTX and the Zeequinox side by side-yesterday----- he showed the separation issue by using a gold ring and a bottle cap--- the Zeke would hit hard on 14 for both----the CTX would separate them by a few points--- i cant remember the numbers exactly ..but you know how easy it got to predict a bottle cap with the CTX---not so with the Zeke--- 14 is 14!----

But..... the quarters and 50 cent pieces had a bigger separation in the Equinox than did the CTX---so there's  where i would grab more scale real estate if I could...

I posited that maybe the gurus at ML could do a software update that would stretch out the readings of the bottle caps and gold---

if there is a only a certain amount of room on the scale--say 0-40 then i would gladly give up  some of the scale in the 25- 40 range--I am digging ALL of those targets anyway.  If it is over 25 it is dug!

Fred,

I know this is an over simplistic view of the VDI spectrum scale but that's how my mind works--- overly simple--- (shut up Scott)

By the way i sold the CTX last week,,, so now I have the exclusive  ability to clean the beach of bottle caps...lolol.

https://photos.app.goo.gl/BemvFxLDmzMOHFh02

3-6-ZEKE.thumb.jpg.c54ba97586aec679875c1356b2b4058e.jpg

 

Link to comment
Share on other sites

The machine with these high settings is very bump sensitive.  From my previous tests with test nuggets, if you were concentrating on 1/2 gram and larger nuggets you could turn down the threshold to near silence.  It will cut out about half of the bump falsing and still hit the nuggets pretty clearly.  You can certainly turn down the Sens and achieve less falsing, but over test nuggets the depth drops off dramatically.  Real world results on undug targets may differ.  Bear in mind this is basically my 3rd time out with this detector, so don't count my word as gospel.  I like the machine, and I want to like it even more because of its weight and ease of use. 

Paul:  No problems with EMI 10 miles outside of sunny Yuma.  The Marine F22's fly  here everyday and they play havoc at times with the GPZ, but no issues with the Nox.  I detected directly under power lines and there was a noticeable hum, but no real problem.  

Edit 3/10 - See follow up post.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...