mn90403 Posted August 21, 2018 Share Posted August 21, 2018 Dave, Jim and his friend have a plan to show a few people what caused gold to be in the Randsburg area. It is a geology field trip of sorts, kinda like Ray Mills does in Redding. (I hope Ray is ok. I haven't heard from him after the fire. I left a message.) You don't take a detector or a dry washer with you. I'm hoping I'll be one of the lucky ones that is invited but many more requests have been made than time they have available to them. Mitchel Link to comment Share on other sites More sharing options...
Lunk Posted August 21, 2018 Author Share Posted August 21, 2018 4 hours ago, mn90403 said: I'd like to know more about your settings before I try to 'detail' my experiences. Mitchel, I haven’t strayed too far from the stock settings of Gold 1. I hunt in the all-metal “horseshoe “ mode unless the hot rocks get too plentiful, in which case I changed the discrimination pattern to reject only -7, -8 and -9, while accepting everything else. I’ve also set both Iron Bias and Threshold Level to zero. Hopefully you’ll break your dry spell soon. Link to comment Share on other sites More sharing options...
DolanDave Posted August 22, 2018 Share Posted August 22, 2018 22 hours ago, mn90403 said: Dave, Jim and his friend have a plan to show a few people what caused gold to be in the Randsburg area. It is a geology field trip of sorts, kinda like Ray Mills does in Redding. (I hope Ray is ok. I haven't heard from him after the fire. I left a message.) You don't take a detector or a dry washer with you. I'm hoping I'll be one of the lucky ones that is invited but many more requests have been made than time they have available to them. Mitchel Jim knows exactly where the Mojave Nugget was found out there.... hope he gives the pointy finger to someone ? Link to comment Share on other sites More sharing options...
Lunk Posted August 22, 2018 Author Share Posted August 22, 2018 21 hours ago, kiwijw said: Hi there Lunk, Did you try Gold 2 mode at all? I haven't, but will next time out with it. Cheers Good luck out there. Or should that be, Good Lunk out there. JW JW, I do have Gold 2 on my user button with, the same settings as Gold 1, so that I can toggle back and forth for comparisons on targets. Perhaps it’s just the ground I’m hunting in, but I haven’t noticed much difference between the two modes so far. Link to comment Share on other sites More sharing options...
geof_junk Posted August 22, 2018 Share Posted August 22, 2018 Now that is the type of answer I like to see, well set out and all the details. Well done phrunt Link to comment Share on other sites More sharing options...
Lunk Posted August 22, 2018 Author Share Posted August 22, 2018 Yes, good point Simon; no wonder I wasn’t noticing a difference between the two.? Link to comment Share on other sites More sharing options...
Lunk Posted August 25, 2018 Author Share Posted August 25, 2018 On 8/21/2018 at 9:47 PM, phrunt said: The only difference between Gold 1 and Gold 2 is the recovery speed, everything else is exactly the same. My understanding is the lower recovery speed may give more depth but sweep speed would need to be slower too. I'm going to try it out next time I'm gold hunting. If you've made them the same settings Lunk, they'll be the same mode if you changed the recovery speed of Gold 2 to match Gold 1. Currently being discussed here Was just looking at the same page in my users manual, and it shows all settings - even the recovery speed - are exactly the same between Gold 1 & Gold 2; perhaps it’s been updated since I downloaded it? Link to comment Share on other sites More sharing options...
Steve Herschbach Posted August 25, 2018 Share Posted August 25, 2018 On 8/25/2018 at 7:35 AM, Lunk said: Was just looking at the same page in my users manual, and it shows all settings - even the recovery speed - are exactly the same between Gold 1 & Gold 2; perhaps it’s been updated since I downloaded it? That’s correct - the early manual has misprints that are being corrected as they are found. Another reason not to print the manual immediately. Latest Equinox Owner’s Manual Page 62... Link to comment Share on other sites More sharing options...
fredmason Posted August 25, 2018 Share Posted August 25, 2018 I was wondering about that...But, assumed you knew better than the Printer... thanks, fred Link to comment Share on other sites More sharing options...
Northeast Posted August 25, 2018 Share Posted August 25, 2018 So, the only difference between Gold 1 and 2 is the weighting that is applied between the 20 and 40 kHz frequencies in the electronics? Assuming that mode 2 is more weighted to 40 kHz and therefore hotter on small gold? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now