Jump to content
Gold Hound

First Nugget 4 19in Coil

Recommended Posts

12 hours ago, Gold Hound said:

My pinpointer is a minelab one it dose not interfere with the detector when off.

Interesting.  Another member just told me about wrapping once with thick foil (in the sheath).  Worked like a charm :)

Share this post


Link to post
Share on other sites

55 minutes ago, Andyy said:

Interesting.  Another member just told me about wrapping once with thick foil (in the sheath).  Worked like a charm :)

I think that was for a Garrett pin pointer.

 

JW :)

  • Like 1

Share this post


Link to post
Share on other sites

Dale Re ( My pinpointer is a minelab one it dose not interfere with the detector when off.)

I have a Ml PP and have probably lost faith in it after digging a deep hole with the Z14, the PP could not find the signal and asked my wife to change over her ML4500 coil to a small Mono and so found the signal on the side of the hole 2/3 way down. ( Asking Wife/Partner to change down coils while she is detecting, is not a recommended way to keep a relationship on a happy footing specially if only a rusty nail is found.)

  • Like 3

Share this post


Link to post
Share on other sites
On 12/3/2016 at 4:31 AM, Gold Hound said:

Hi JW

If you saw the crazy stuff I do every day ya wouldn't be worried about my shoulder. ................ you'd be wondering whether I'll make it to that age¿¿¿¿¿

A couple of months ago I got a 350 ktm so this may shorten my life expectancy considerably LoL

Is the KTM replacing the little guy with fat tires or will
you still have both to choose between..?

Swamp

Share this post


Link to post
Share on other sites
On 12/4/2016 at 10:24 AM, PeterInSa said:

Dale Re ( My pinpointer is a minelab one it dose not interfere with the detector when off.)

I have a Ml PP and have probably lost faith in it after digging a deep hole with the Z14, the PP could not find the signal and asked my wife to change over her ML4500 coil to a small Mono and so found the signal on the side of the hole 2/3 way down. ( Asking Wife/Partner to change down coils while she is detecting, is not a recommended way to keep a relationship on a happy footing specially if only a rusty nail is found.)

Yeah I wouldn't be doing that too often¡¡¡¡

The ml pinponter is next to usless on nuggets under 5g.

  • Like 1

Share this post


Link to post
Share on other sites
12 hours ago, Swampstomper Al said:

Is the KTM replacing the little guy with fat tires or will
you still have both to choose between..?

Swamp

Im replacing it with the ktm but still currently have it. As the ktm runs the full size wheel and weighs 5kg less even though it is a 350 vs a 150 and it handles like a trials bike because it has trials ergonomics and the gearing is set low in the first 3 gears to aid in rough technical riding but the other gears are set for speed. I also installed a rekluse auto clutch which makes it handle even better.

Its the model called ktm 350 freeride but mine is the rare racing model with a worked motor and changeable map settings

20161003_171921.jpg

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By phrunt
      I have ordered a new size X-coil, it's a 12x8" X-Coil,  It's already in the post however it's delayed in shipping due to international shipping delays the world over.  Hopefully this coil arrives soon. I am very excited about it as I think it will be the perfect size for NZ.
      It's even in NZ's black and white colours.

      This should be good in our rocky terrain on small gold.
       
    • By phrunt
      I haven't had a chance to go prospecting since our lock down ended a few weeks ago, once lock down ended I was busy catching up on everything that couldn't be done in lock down 🙂 NZ has done a stellar job in eradicating the virus so our lives are essentially back to normal now except for no International tourists which in our part of the country are a big part of our economy.  We haven't had any new cases in some time and there is now only one person left in the entire country that is in quarantine with the virus. 

      The one case left is on the North Island, so no problem for me down the bottom of the South Island 🙂  Every morning lately has been a heavy frost so I was intending to do my gold hunt in the afternoon once the ground thaws out.

      This was my yard before I left.  A bit chilly 🙂
      It was good to get out prospecting again, my wife and daughter wanted to tag along as they were going to ride their bikes along the cycle trails in the area so my day was limited, I only had a couple of hours.  We parked up and I walked to my usual spot and showed them where I'd be so they could come back and find me.  My first target was a shotgun pellet, damn it, I'd forgotten they existed, I had a hard enough time remembering how to use my detector it's been so long 🙂
      I was then walking across to the spot I wanted to have a snoop around and on my walk there I got a signal, it wasn't a booming target and it sounded too good to be a shotgun pellet.  I dug the surface away and the signal was still there, looking positive, it was at this point I took a quick video in case I was lucky enough that after only about 15 minutes I had my first nugget.
      I wasn't too sure on this one as the spot where it was located didn't really feel right, not the usual place we'd been finding gold around this spot so I turned the video off and started the recovery, possibly expecting a deep old bullet shell or something.    It was a really scrubby area too, lots of prickle bushes and old sticks everywhere.  In all of my excitement of my first find of the day I didn't even get a photo of the area, but the video shows it.  I had to dig a fair way down to get to my target, It was stuck in some layers of the rock which I had to smash out to get to it.

      A decent size too! woohooo, what a start.  I like when they're big enough my Carrot narrows them down.

      Just after I'd found the nugget I was rechecking the area and heard a bike pull up, it was JW, we hadn't seen each other in some time due to the lock down but he'd been coming to this spot again the last few weeks once lock down ended.  We had a chat then got stuck back into it, he went to his usual spot where he's been doing very well, and I went back exploring the side I've been attacking.
      No good targets for about 40 minutes now then in between some bedrock I had another nice sounding target that survived a few scrapes of the pick, always promising.

      These small coils are just brilliant for our hunting grounds here, the smaller the coil the better, the small 10" X-coil has brought this old hunted out area back to life as you can get into all these little tight spots and it paid off again, the coil only just fit between these rocks too, there is still a lot of ground the 10" is too big for but it does get a majority of it.

      I'm no photographer 🙂 but in the shadow in front of my coil is the dig hole, right between the two rocks.  A bigger coil would have missed this gold.

      The bedrock is shallow here but I have done this ground with the Equinox a few times and missed this piece.  If you look hard you'll see the crack in the bedrock where it was.

      And the nugget, typical sort of nugget for this area, all water worn looking smooth bits even though none of the rocks around the area are rounded water worn rocks.  
      A few more junk targets and my phone dinged, it was my wife saying shes done bike riding and was on her way back to collect me so I walked over to see how JW was doing.  I had heard him banging away at the rock for ages while I was detecting around so I assumed he'd done well.  When I arrived he was digging out a big hole in the bedrock cliff face, all the soil was out of the crack and he was breaking apart the rock with his screw driver and hammer. So far he had one bit of gold but another signal was in there, so we tried to use my Carrot to narrow it down, no luck so he kept smashing away.

      He had created that big hole, the big bit of rock at the bottom of the photo was from the hole, the rest were thrown down the side off the cliff.

      After smashing some more up and trying to find it he still had no luck so we tried the Carrot again,  this time it picked it up, real good. It sure helped speed up the recovery.

      A big one too! Carrot detectable size again.  Unusual to get biggish ones and now we've both got one!
      He checked the hole again, and another signal

      A tiny one!, Rechecked again...... another signal, unbelievable.  A lot more smashing out of the rock and out it pops

      The hole was getting bigger and bigger

      And more kept popping out.  My wife and daughter arrived on their bikes now to collect me so I called them over to see the hole that keeps giving, it still had a signal in it now that we were working on recovering, each target as needing more rock smashed out


      This 10" Coil can really pick up some incredibly small nuggets.
      And they just kept coming, my family were watching on with interest.  More nuggets kept coming out then JW checked the soil and crumbled up rocks that came out of the hole and more signals, all over the place

      Absolutely nuts, what a hole!

      All from that one hole,all were in the rock needing smashed out.  I had a ball helping with that recovery, 13 nuggets at 1.8 grams total weight.  JW said yesterday he found a similar hole on the same cliff face with 10 pieces in it.

      And my total, sorry for the glary photo, was taken at night once I got home, and the houses LED lights mess up photos.  0.865 grams for 2 nuggets, 0.76 of that is the big one.
      I really love the small GPZ X-coils, I can not wait for my 12x8" X-coil to arrive as it may get into the spots the 10" coil can't.
    • By Steve Herschbach
      U.S. dealers are including the 19” coil free with GPZ 7000 purchases for a limited time. I’m not sure if this is being offered in Australia.

    • By klunker
      I'm not shy about it. Yup. I have big clumsy feet. The good news is it gives me stabilizing ballast should sobriety forsake me. The bad news is it's hell on GPZ 7000 lower shafts. I have broken several. To make matters worse, the lines of communication between my big feet and my small command and control center often get disrupted somewhere between my gullet and my gizzard which allows my big feet to proceed on a different heading than the rest of me. Oops, there goes another GPZ 7000 lower shaft. But I don't take full responsibility for all of these broken lower shafts. I don't recall ever breaking the good ol' GPX lower shaft and they fit at least 10 different detectors and cost less than half of a GPZ lower shaft. So I lay most of the blame at the feet of Minelab and not because of the feet of Klunker. The shaft is just plain flimsy. 
       Being a "tight wad" by nature I have tried numerous times to repair a broken lower shaft using glues, epoxies, tape, splints and every flavor of bubble gum you can imagine. Nothing worked. I finally came up with the idea of totally replacing the lower end of the shaft and it work splendidly.
       This was made from an inch and a quarter by 1 inch pvc plastic pipe tee, a fine toothed saw, a drill, a round file, a sander, a heat gun and a bit of good epoxy. 
      This repair has held up for a couple of dozen trips and survived the icy conditions of early spring detecting, which is when my big feet are at their worst. If anyone is interested I will post instructions

    • By flakmagnet
      Why oh why does the WM12 take such an unusually long time to recharge when the GPZ battery charges in a couple of hours, and other electronic equipment charges in (much) less time than that? I am not actually complaining but I am very curious why this is so.
      Anyone?
    • By mn90403
      Today I took a short beach swing and didn't find much but it was good to just get out in a sea breeze if you know what I mean.  I used the Equinox 800.  About midway through my 2+ hours I checked my settings and noticed I had recovery speed on 5.  I changed it to 6 and then the thought came to my mind, "What would I do or could I do with the Zed to immulate changing the recovery speed?"
      I've used the 800 in many different settings so far but mostly the beach.  I've seen the videos of nails next to good targets.
      How do YOU tease the good targets out of trash like the 800?
×
×
  • Create New...