Steve Herschbach Posted May 18, 2018 Author Share Posted May 18, 2018 People who use detectors in the water have been converting from S shafts to straight shafts for years. If the Equinox was a S shaft you would have just as many complaints if not more. Go figure. So four pages and a few more complaints, but not a single person has been able to name just one waterproof detector of comparable performance that has better ergonomics. Apparently and as usual Minelab takes heat for not being better than they are when everyone else is at a minimum no better and in most cases are demonstrably much worse. And no, detectors that are not waterproof do not count because removing the waterproof requirement removes a major engineering obstacle as regards ergonomics. 4 Link to comment Share on other sites More sharing options...
EL NINO77 Posted May 18, 2018 Share Posted May 18, 2018 ...the direct rod if it is well balanced - it can not make a problem when it detects .. on the contrary - it can make the detector simple,solid, light and compact..-mi personal carbon tuning my detectors...-better balanced,solid and smaller weight.. Link to comment Share on other sites More sharing options...
Tom Slick Posted May 18, 2018 Share Posted May 18, 2018 For me personally I prefer the ergos of my Multi Kruzer over my Nox 800, but that's because I mostly use a 5X9.5" or 7" round concentric on it. I'm pretty sure that the 800 will feel better in 2019 when the smaller coil becomes available for it. ? 2 Link to comment Share on other sites More sharing options...
Nuke em Posted May 18, 2018 Share Posted May 18, 2018 Nothing wrong with the Nox at all i think , in terms of the ergonomics . 1 Link to comment Share on other sites More sharing options...
flakmagnet Posted May 19, 2018 Share Posted May 19, 2018 I don't care if the Equinox tips over when I lay it down. I just don't. Link to comment Share on other sites More sharing options...
relicmeister Posted May 19, 2018 Share Posted May 19, 2018 Most if not all of my criticisms of the equinox, including the ergos, really are more related to my obsessive nature, and not errors of design. After I added the folding modification, I for a time used it with the shaft in a "6:35"position, which mimicks to an extent the ergonomics of an s-shaft. I did conclude the swing felt a little better than straight, but not that much so, and I'm back to the regular straight position.( however, if I find myself wearing certain hiking boots with metal eyelets, I will use the "6:35" position to keep from falsing on my shoes with the closer in swing of the straight shaft. If I do get tired I have the simple bungee /hook setup shown to give an essentially weightless swing. Link to comment Share on other sites More sharing options...
sillllvar Posted May 20, 2018 Share Posted May 20, 2018 No Complaints from me on the ergonomics, I think its the Dogs Bollocks ? Translation = Awesome. HH Sillllvar 1 Link to comment Share on other sites More sharing options...
Belgy1972 Posted May 20, 2018 Share Posted May 20, 2018 Personally I think the straight shaft was the perfect choice for the Nox but as stated if they would have used an s shaft people would be complaining and asking for a straight one. The design, ergonomics and most of all the power of the Nox 600,800 are all great. After all its the overall machine and its capabilities that we all bought it for. 1 Link to comment Share on other sites More sharing options...
Norm S Posted May 20, 2018 Share Posted May 20, 2018 The Equinox is fine the way it is. I adjusted the shaft length and the cuff and no issues at all. I have seen guys say the Equinox is lighter than the At Pro and less tiring.. Who is going to notice .04 pounds when most likely they carry a lesche and a pointer and probably a pouch.. You want a detector that will wear you out try the Etrac.. Even after 4 days with the Etrac I was used to it and not sore... Most people that complain are loyal to other brands but bought an Equinox because if the didn't they would be missing out and they would be missing out if they didn't buy an Equinox. I have seen guys spend over $100 on modifications only to go back to the standard shaft and cuff. I have seen counter weights near the cuff.. I am 73 yrs old and have arthritis and move like an old man. I can hunt for two hours everyday and dropping to the ground to dig a target as much as 50 times but swinging the detector don't wear me out it's digging targets that does. All around feature for feature and dollar for dollar there is no better detector on the market. 6 Link to comment Share on other sites More sharing options...
pikens Posted January 22, 2020 Share Posted January 22, 2020 For the IN water use i get it on a straight shaft. For all beach and land S rod is much better i think. Swing a S rod detector then a straight rod. If you have to left the coil to keep it off the ground in front of you when you swing then that will put a stain on your arm is no time at all. I love the Nox. Just wish it had a s shaft. It would make a great detector much more user friendly. Just me. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now