Steve Herschbach Posted July 27, 2020 Share Posted July 27, 2020 There is more to it than just an add on single frequency option. Not that I’d know anything about this kind of stuff though. I think it’s best I just sit these kinds of threads out as they tend to baffle the hell out of me. 5 1 Link to comment Share on other sites More sharing options...
midalake Posted July 27, 2020 Share Posted July 27, 2020 52 minutes ago, Steve Herschbach said: The update adds a 4 kHz single frequency mode. The other modes are unchanged. Says so right in the update. Thanks for the clarification. That is the way it reads for me too. [kind of] However the feedback I am reading , seems many think this is an addition to Multi, and/or adding something to multi. . 1 Link to comment Share on other sites More sharing options...
Steve Herschbach Posted July 27, 2020 Share Posted July 27, 2020 Yes, there will be noticeable differences in multi. Nothing to do with the single frequency option. Commencing radio silence. Out. 4 2 Link to comment Share on other sites More sharing options...
mn90403 Posted July 27, 2020 Share Posted July 27, 2020 I have put on the other updates within 2 days of seeing them. I'll be putting this one on too but I have to crank up another computer besides this Chromebook to do it. I was HOPING someone that is using the new update now would tell me it is GREAT or not. I haven't gotten any takers. Link to comment Share on other sites More sharing options...
midalake Posted July 27, 2020 Share Posted July 27, 2020 20 minutes ago, mn90403 said: I have put on the other updates within 2 days of seeing them. I'll be putting this one on too but I have to crank up another computer besides this Chromebook to do it. I was HOPING someone that is using the new update now would tell me it is GREAT or not. I haven't gotten any takers. I am off my machine for a while yet so will not be of any help. For me personally, I will get back on the machine for a week. Then after being up to speed, put the install on. Should be easy to tell at that point. Link to comment Share on other sites More sharing options...
Joe D. Posted July 27, 2020 Share Posted July 27, 2020 What ever happened to "Don't look a gift horse in the mouth"!! Complaining about a download that's free, that you don't have to install, baffles the mind! Really?? 👎👎 7 Link to comment Share on other sites More sharing options...
Dances With Doves Posted July 27, 2020 Share Posted July 27, 2020 My take on it is it's a nice option.If you are hunting In MF for silver and emi is a problem.You can choose either 4 kz. or 5kz and which one handles emi better is the one you choose to get better performance.You get a extra choice that may make a difference. 2 Link to comment Share on other sites More sharing options...
mn90403 Posted July 27, 2020 Share Posted July 27, 2020 7 hours ago, mn90403 said: Ok, who has any use experience with the update? Other than adding a frequency I don't need I don't expect there to be a 'big' difference in performance at the user level but I hope someone proves me wrong. I had one of the original 800s and the off/on switch broke. The new one they sent as a replacement had the latest software with the F2 on it when I got it. I don't use either F ... haha Seven hours ago I finished reading this entire thread (until then) for the first time. I then put up this post. I didn't read what Minelab has said about their own update. That is on me. I was 'influenced' in my wording of my post by several who said that this was not really an 'Equinox' update. The update was really for another unnamed machine coming out in the future. There was talk about why this was the update chosen to add 4 when there were so many other things that could have been done. It's all there to read. I didn't say I wasn't going to put on the update. I will. I'm glad Minelab is keeping the platform current. It is a free upgrade and that has always been good from Minelab. Next update I'll just install it and not read any reviews about it or expect user input first. I remember several user comments when the update with the new bias came out that were helpful but not so far on this one. (Maybe I'm just digging a deeper hole here and there isn't a real target but I want to make sure.) After I put it on I'll give my opinion of it as I use it in a different thread. Mitchel Link to comment Share on other sites More sharing options...
Chase Goldman Posted July 27, 2020 Share Posted July 27, 2020 It really wasn't all that complicated - ML added a new single frequency setting - 4 khz and some unspecified "stability improvements". Certainly a lot less complicated than figuring out what F2 iron bias was all about. No one said it wasn't an Equinox update. The discussion centered around videos posted in this thread and first hand experiences that showed the new 4 khz setting behaved pretty differently (more stable and clear sounding) than 5 khz and folks were speculating why that would be the case. Testing a future platform signal processing algorithm, perhaps? That's what we do on this forum. If you read the posts in context, that can be helpful information but depends on how you use the machine, especially in regards to single frequency operation. The update may be less appealing from a general user sense than previous updates because it is focused on single frequency operation, and apparently may only apply to 4 khz. If SF 4 khz is something you would seldom use for example, as a wet salt sand beach hunter who stays mostly in the MF only Beach modes, then yes your benefit may be small or nill. A deep silver hunter may find he has a completely new capability. Over the last two updates (2.0 and 3.0) ML appears to be in a mode where new features are being added (yay!) and old features are either left alone or actually enhanced. Nothing existing seems to be worse off (that could be more hotly debated for update 1.75). Bottom line: ML has removed much of the risk of updating by accumulating new features, leaving old ones intact, and as always, giving you the ultimate control in being able to roll back if you desire. Only the individual Equinox user can make those decisions for themselves. PS: Mtichel - I see now that you have to jump through extra hoops to load the update because you are using a Chromebook as your daily driver, so I can better understand why you would want to know if it is worth the trip. Ted below pointed you towards ColonelDan's impression. As a fellow beach hunter, he might be your most relevant source on whether the update is worthwhile for you, he anecdotally noticed what he felt was improved stability across the board (including MF beach modes) as he was able to run sens a little higher than normal. Might be worth the trip even if it is just a placebo. Looks like they didn't break anything. Good luck. 4 1 Link to comment Share on other sites More sharing options...
Popular Post Gold Hound Posted July 27, 2020 Popular Post Share Posted July 27, 2020 Thanks for the update link and info. I installed it straight away, I have only ever had good experiences with all of minelabs updates in the past. Can't believe all the negative rhetoric! I for one am greatful for any free performance enhancing updates. Shows how minlab is continually developing even their existing products. 9 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now