Jump to content

Recommended Posts


 Did you find that area we were going to look for?  Nice nuggets! Congrats!

Share this post

Link to post
Share on other sites

That's some nice, course looking gold.

Quartz, iron all the right ingredients.

What state are you in if you don't mind me asking?

Share this post

Link to post
Share on other sites

Thanks everyone for the congrats. I appreciate it.

I've been marking every find with the 7000 gps. Some patterns are starting to develop. Pulled out another 11 grams of smalls. But nothing outside the original 1st day patch area. I have a feeling as the ground dries,some deeper targets to be found. The ground is variable to saturable according to the paper Steve just posted. But just a hunch on the ground being drier theory to find deeper targets. Thinking that their might be some halo effect going on with the ground being half wet and dry. I turned down my sensitivity to 9 and was able to pick up more shallow targets with less ground noise.

  • Like 1

Share this post

Link to post
Share on other sites

Suggestion for patch, try Bogenes settings. Adjust sensitivity to full bore and turn down threshold to what you can handle, say 10 or bit less. Got some amazing results on a couple of such patches here, many deep subgrammers. Unconventional but productive but maybe not for that ground.

  • Like 2

Share this post

Link to post
Share on other sites


Hey great shooting and putting your boots and coil to the ground! Due Diligence, does payoff...WTG


  • Like 1

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By kiwijw
      Hi guys, I guess the jet boating was a bit out of place so I will give it a miss. I can actually do without the video editing of a clip I was going to put up. So skipping ahead to sunday just gone. I was going to go jet boating up the Dart River at the top end of Lake Wakatipu as the New Zealand Jet Boating Association had its annual general meeting in Queenstown over the weekend & the Otago branch was celebrating its 50th anniversary on Saturday night, of which I am a member. So Mrs JW & I went along to that.

      They were following up with a jet boat run up the Dart River on sunday. Ironically Mrs JW & I did the Dart River on Saturday as the commercial operation was having a half price locals day which we had booked in advance. I was still keen to go in our boat on sunday but Mrs JW wasn't.  The river was very low & there has been bad fog. so all that could have ended up in a few groundings. I think Mrs JW is still getting over the pushing we had to do the other weekend on the West Coast.
      So come sunday I decided to go for an afternoon detect to a local area. I grabbed the Gold Monster with its 5" coil & relented in taking the Nox or the GB2. Just the GM. Many of you will recognise the area from photos of previous posts of gold finds that I have made here. It is where I very first used my Nox 800 & the success I had there with it & also many times with the Gold Monster & GB2. No one knows better than me that you never get all the gold from a good producing spot. Ever. No matter how many times you go over it. No matter how very slow & thorough you have been each & every time.  I have given up being surprised at getting more gold on different days at various location. Ok... it is very small gold, hence taking the GM 1000 & 5" coil. The Zed just can't cut it here anymore, but who knows...maybe one day it will. The thing I was banking on this day was how damp the ground was & how deep the dampness had penetrated into the ground due to a few recent snow falls that had melted away. But the cold winter days & frosts hadn't allowed the ground to dry out. I know I bang on about how this helps with better sensitivity & ground depth penetration, but it just seems to be a fact.
      So I get to the spot. Fire up the GM. Let it cycle through its start up tuning. Deep All Metal Mode, Full max sensitivity on 10 & just using the detectors internal speaker backed off a couple of notches from full max & into it. Despite the damp ground it is running sweet in our insanely mild ground. Due to getting many small bits of gold here I am in absolutely no hurry with my coil sweep speed. Coil kissing the ground. Not even a couple of minutes into it I get my first signal. I said to myself that I should video this from start to recovery. I didn't....but I went through the whole procedure as if I was videoing it. Even talking it out. I went through all the settings. Auto sensitivity, Auto + sensitivity. Backed off to 9, 8 ,7 All metal mode & Iron reject. First off in 10 sensitivity & deep all metal when I first got the signal it was a very positive hit with the gold chance indicator saying non ferrous most of the time, but the occasional flicker to the dark side. Push the detect mode button to iron reject & still a very strong positive hit & audio signal. If it was ferrous it would have been silent in the audio & the gold chance indicator would have favoured the left side. So I was of no doubt that it was non ferrous. But was it going to be gold? I went back into deep all metal & backed off the sensitivity to 9, still a strong good hit & the gold chance indicator flicking to the right but being a bit eratic, 8 still a hit but a lot weaker. Would have pulled ME up but there was no movement on the gold chance indicator at all. Ok...time to dig. More of a scrape really. Signal was still in there so bit more of a scrape until the signal had moved.  

      Ah.... now had it in the scoop in that clump of dirt.

      I see it. Ye Ha a bit of the good stuff.

      Off to a good start. Slowly scanning about & not two feet away another sweet little signal. Went through the same procedure with settings as before & knew it was non ferrous.
      It was on a schist face dropping down to a tailing race which is down in among those bushes to the left.


      Another small bit of gold

      Then another signal

      Another bit of gold

      Not even a bit of junk yet.
      Moved on a little bit & was pulled up by another positive signal

      This was a bit deeper

      But gold again

      Not two feet away I got another signal. This had me digging down to the schist bed rock & even smashing into it.

      This was very promising, peeling out schist bedrock & the signal still in there. Non ferrous all the way. Then the signal was in my dug out pile but seemed a lot more mellow. MMmm... thats strange. It should be screaming. Isolated the target in my hand down to a bit of ferrous crap. WHAT....no way. Scanned back over the smashed out bedrock hole

      & bingo....screamer signal. That's more what I expected. And here is why.

      You beaut. 👍
      Then things went quiet for a wee while so I did my mountain goat thing scrambling on the edge. A 6 foot section of this drop off face has already succumbed to the river below & from where I got a bit of gold in the past with the Zed before it broke away. That was a bit of a wake up call. But I got a signal with the GM & couldn't help myself.

      Looking down to the left you will see the smooth slicken schist face from where the rock face peeled away & the ruble way down at the rivers edge.

      But gold it was for the GM

      But oh so small 
      Back away from the edge a bit I got another sweet little positive hit.

      Smashing into the schist bedrock again to move the signal.

      Another bit of gold

      It was starting to get dark so I took a pic out in the field of what I had so far. 7

      What are my chances of getting 10 bits before I call it quits or get driven out by the dark? I made 10 my goal, then I would leave.
      Carrying on from my last bit, I got a signal between two raised edges of schist bedrock.

      Scraped away into it until the signal was out.

      Gold bit number 8.
      Playing mountain goat again I got a faint faint signal. This glacial deposit area is prone to hot rocks but they are a distinct sound & the rare earth magnet soon sorts them out. This signal was better than that.

      Still plenty of battery. Auto+ Sensitivity, deep all metal mode & volume down a couple of notches.

      Gold bit number 9

      One more to go. Come on.....
      A few minutes later & it came

      Number 10. Cool. Time to go.
      Couldn't help myself & kept detecting as I walked out. Got another signal & gold bit number 11. Somehow when I got home to wash & weigh I lost a piece. Bugger.
      So 10 bits here for the Gold Monster

      .53 of a gram 

      First swing of the Gold monster for quite a while & it didn't fail to produce on absolutely flogged ground. Loved the damp conditions & although I am not too much of a fan of this tiny gold & all the effort that goes into it, it is a bit of a novelty & a fun way to fill in a few hours close to home on a nice cool wintery but sunny afternoon. Cheers
      Good luck out there
    • By oneguy
      Been about a month since I've found any but this little guy gave me some redemption...finally!!!!!
      Supposed to rain hard all weekend so I aborted a trip.  Don't get too wet Reese and good luck over there!!!!!

    • By kiwijw
      Hi guys, It had been three weekends since I last swung the Zed. Last Wednesday we had another fall of snow down to low levels. I didn't even get to work. Not that I minded as I would have been working outside in it.  Bugger that. Total carnage on the roads as people tried driving in the conditions totally unprepared for it. Saturday came & the weather wasn't supposed to be overly good but I was hanging out for a detect so I went for it. Bit of a late start but I was at my destination & swinging by about midday. It was to an area I have absolutely thrashed over the years but it still on occasions coughs up gold for me. It is where I very first tried the Gold Monster, snagging two bits.
      It was also the exact area where with the 4500 & my then new 11" Coiltek Elite coil I got on to a small pocket of reef gold. It was more just a small rich little quartz leader or stringer that soon dried up on me. I really thought I was on to something good back then. I had to back fill the hole as dark got the better of me & I had to wait until the next weekend to get back to it. Boy was I fizzing.
      As you can see it is very rough reefy gold with quartz still attached. I was hoping that due to the snow, which would have melted away from this area, the ground would be moist & hopefully for some depth. It was & I was hoping to latch on to some more of this reef gold as the damp ground conditions always gives me better depth & sensitivity. So I got to the spot & rigged up the Zed. I got far enough away from my truck so it wouldn't interfere with the detector before firing it up. Checked my settings. High Yield/Normal & full max sensitivity at 20. Settings as of my last mission. Auto tuned. Ground balanced over the ferrite ring & I was into it. Straight away I was hit with noisy ground. I don't usually get such a bad reaction in damp ground. Maybe it was this particular location on top of the damp ground. I backed the sensitivity to 18. It wasn't as bad but still more noisy than I usually get. I forced myself to put up with it & tried my best to tame it with very slow coil sweeps, as I knew there had been gold here in the past so I was in no rush, & I managed very careful coil control keeping it very smooth & avoided any slight lifting. Keeping the coil as flat to the ground as I could & a consistent height. Which was a low as I could get. Otherwise I was plagued with moans & groans & the Zed warble.
      I was into it about two minutes fighting the ground noise when I thought I heard a target signal. Gosh.... I wasn't overly sure with the noises going on but it did appear to always be in that one spot ever so slight. A couple of scrapes & it had moved. Bugger.... probably a shotgun pellet.
         You can hardly even see the scrape mark but a small bit of gold it was. 
      .21 of a gram
      Then not even three feet away another very faint target like signal among the noise.
      Another bit of gold but this was tiny for that big coil.
      .04 of a gram. 
      Then believe it or not but another signal about three feet away. Another very shallow scrape.
      But tiny gold again. .07 of a gram.
      Gosh my first three signals & three bits of gold. I was on a roll.... or was I? No that was where it ended for hours. The ground noise was doing my head in so I flicked into High Yield/Difficult. That made things a lot more bearable, I was able to crank the sensitivity back up to 20 & felt I had to to get back some sensitivity but knew It was no match for High Yield/Normal. It was also when the gold dried up for me. I did get a few pellets & on an old patch area I got a signal that had me down 10" on to the rotten schist bedrock where all the gold from my old patch was on. I was 100% sure that this was going to be a good bit of gold. Finally got the target in my hand & it was a flat bit of lead. Bugger. I ended up with a few of those & it was starting to get dark & I was just hoping for one more bit of gold to end the day on. The weather had been ok for the day but the wind had really picked up & was most unpleasant. I got a signal that again was just a shallow scrape but it was onto bedrock after about 2 inches when the signal was out.
      Ye Ha. A bit of gold to finish the day on.
      .16 of a gram
      So all up 4 pieces for just .49 of a gram 
      And the associated rubbish
      Got back home in time to watch the All Blacks, our national rugby team, play France & beat them 52-11 
      Good luck out there
    • By mlgdave
      All from 1 pocket actually 140 feet underground

    • By phoenix
      And I mean little.      The 2300 could just barely hear it and I had it the scoop 4 or 5 times before I could hear it in the scoop 😯  I`d say it`s a 0.05 g max. Dave

    • By Lunk
      So I headed to the hills yesterday to get acquainted with the Gold Mode of the EQX 800. Equipped with ear buds and the WM08, I used Gold 2, and only deviated from the factory presets by adjusting the volume to 5, the tone volume to 5, and notched in the 0 segment on the discrimination scale. The ground mineralization was a little too hot to run max sensitivity; backing it down to 20 quieted the ground nicely, but still allowed the targets to really pop. I chose an old thrashed patch that I’ve worked with many detectors in the past, including the Gold Monster last summer. Seems someone had been detecting the area recently , as they left their excavations open. I powered up the EQX, and performed a noise cancel and auto ground balance. Not 5 minutes into it, and the Nox got a nice hit in the bottom of one of the shallow dig holes; scraping out an inch or two revealed a bright little nugglet.

      Just a few feet away I got another good response, this time in virgin ground. After removing the overlying carpet of moss, the target was still in the ground and much stronger. Digging another inch or two into the weathered quartzite bedrock, and the target was out: another golden bit.😉

      After hitting a small patch of tiny foil bits, the ground yielded one more yellow goodie.

      During most of the hunt, I was running in all metal, unless I got into a healthy patch of hot rocks. They read a consistent -7,-8,-9 on the EQX display, whereas the nugglets were at 1 or 2. Iron falsing on square nails and such was much higher at anywhere from 11 to 35, and was easy to identify because the numbers weren’t consistent and wouldn’t pinpoint.
      All up, 0.25 of a gram.