Jump to content
californiagold

Detecting With The Gold Racer 5x7" Eliptical

Recommended Posts

Well I'm mostly healed from knee surgeries and decided it was time to get back at it. Despite all the smoke in the air in siskiyou county from the gap fire,  it was not too bad outside. I headed out to an area that is one of many areas that ill be detecting this winter. it is not a well documented gold area, but it has good coarse gold.  Most of the diggings in the area are shallow, but there is some good deep ground for pi detector work.  For today I brought along my trusty friend Makro Gold Racer with the new 5x7 eliptical coil.  I ran it about the same as other coils. in all metal and some isat adjustment. The place is plagued with alot of small iron and the little coil did a great job of sniping good signals out of the junk. it is extremely sensitive to micro sized targets and fits nicely under the bushes and between the rocks. it has a really nice sensitive tip for pinpointing.  . all in all the 5x7 eliptical performed very well and would be a great accessory to hunt especially in the iron areas. well I ended up finding 16 pcs and 2.5 dwt for the little coils debut. I cant wait to try it out some more.Good luck

2016090595211026.jpg

20160905_172414.jpg

20160905_172406.jpg

20160905_172325.jpg

20160905_172313.jpg

  • Like 8

Share this post


Link to post
Share on other sites

Great finds and thank you for the pictures. Good to hear you'll be like a new man in no time and can get out to do what one likes best.

Chuck

  • Like 1

Share this post


Link to post
Share on other sites

Great work! My little coil is permanently attached to the Gold Racer. Seems to be a perfect match. I think it maintains a steady threshold even with a slightly higher Sensitivity setting, which helps in hearing those faint Zip Zips, which sound more like (say it really faint) "seup - seup" :biggrin:

  • Like 2

Share this post


Link to post
Share on other sites

Pretty gold...nice to see your back in the saddle again. Thanks for sharing...

strick

  • Like 1

Share this post


Link to post
Share on other sites

Good to hear your out again....nice job on the gold with the Makro.....

 

  • Like 1

Share this post


Link to post
Share on other sites

Im sending my top detector agent Nurse Paul back to the scene of the gold to see what he can dig up. lol. hope he dont get lost. 

  • Like 1

Share this post


Link to post
Share on other sites

Thanks for the new posts and pictures of gold.

Lost is a condition for Paul not an event.  Life is simpler that way.

Now, if you need some medical help ... stand back and let him do his work!

He might even come back with some gold if you didn't get it all.

Mitchel

  • Like 1

Share this post


Link to post
Share on other sites

Always enjoy your posts! Glad to see ya back. Nice nuggs!

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By strick
      Something I've been wanting to do for a while now..I got another x ray  generator couple weeks ago and wanted to try it out on my DR System.. Heres most but not all of the coils I have. 
      1. CTX 6"
      2. TDI Pro 12" double mono 
      3. CTX 17' 
      4. XP Deus 9" 
      5. Miner John 8x12" mono
      6. x cal 8" 
      7. Gold Monster 6" 
      8. Fisher Gold Bug two  6" 
      9. Nox 6" 
      10. Nox 11" 
      11-14 GPZ 7000 stock coil 














    • By mn90403
      Several people have them.  What is your favorite X Coil and why?
    • By Norvic
      Out early this morn. to a shallow patch that produced nuggets up to 3 grams, the very first patch I found with the Z when it was less then a month old. 4 hours of detecting with the new 10" X coil, like both the 15 & 12 I found I could run the Z in normal on some fairly hot ground. Gold...…………. WOW it gets them small and that`s all it got small scraps, 10 to the gram stuff.  Now the 10 " runs a little noisier then the 12 & 15, thus I dropped the sensitivity to 8, no knock sensitivity at all, I was amongst rocks and tall grass. 
      The patch I run this on, was the initial patch I run my modded SDC with the 11" Coiltek Extreme, by doing so I thought I`d be able to perhaps see some difference in the ability of the Zs 10" X coil vs SDCs 11" Extreme coil, not so, both are top small gold coils.
      Whilst retrieving a nugget, the Zs threshold disappeared, I found the machine had turned itself off. I took the battery off and put it back, restarted the Z and no further troubles. Whether this was caused by a bad battery conx, or is related to the X coil I don`t know. I have never experienced an unexplained turn off before, thus will be keeping a eye on this should it occur again, I was using my sons Z as mine has the 12"X on it, back in the ute.
      Am I impressed with the 10" X coil, I sure am, it is a top addition to my coil armoury, will see much use amongst rock and narrow gullies where the larger coils will not go, although I do prefer the 15" X which has replaced the ML14 as my go to coil on the Z, I love nothing better then new patch hunting, just haven`t the patience for the clean up of patches, although they are there for the days my legs can`t do the yards.
    • By Norvic
      Have now got many hours of swinging, but I still am getting surprised at their performance, they`ve both put some weight in the pocket. Stability does not suffer at all from swinging against rocks or grass and importantly they are an advancement on the 2 ML coils in their depth and sensitivity capabilities. They have nice flat areas on top for pushing soil around with finger to isolate nugget. Also surprisingly they act a wee like mono coils (they aren`t) in that you can push any side, front or back vertically into hole or dug out soil to centre and retrieve the nugget which helps a lot in time it takes to retrieve signal. I`ve found I am using them both in normal much like I found one could with the ML19 but not so with the ML 14" which I found I had to use in difficult most the time on the ground conditions in my area.
      I run general/normal/10-15 sensitivity/semi-auto/ 7 volume/24-25 threshold which both X coils maintain nice and steady except for the odd wet tree root, hot rock, charcoal or ant hill as per norm. All pros no cons at all so far, have become so confident and pleased in their ability have a 10" in the mail, should be here next week. They have lifted my Z game, I place results way ahead of warranty concerns, had no trouble making the patch leads for my & my sons Z. I have no affiliation with our dealer or the Russian manufacturer, just am a very happy user of these quality coils.
    • By Condor
      Dave took 5 hrs out of his prospecting day to meet me and check my coil and Patch Lead.  It turns out the Patch Lead was faulty, Minelab Chip probably fried.  After talking with Dave, I probably used too much heat on the soldering iron and damaged the chip.  My philosophy of more power, faster results may have been misguided.  
      Fortunately, I didn't sacrifice a $900.00 coil since I had already sacrificed the coil when I inadvertently drug it behind the Rokon for several miles.  So,  I sent my working coil off to have it professionally done for a new Patch Lead.  More delays, but a cautionary note to all considering this route.
      Some interesting insight from Dave that might be helpful for those waiting for more testing.  Dave has a years worth of Anecdotal Evidence on the effectiveness of these X-Coils.  He shared some of his observations and it's quite impressive.  He's more than satisfied with the results but has no interest in engaging in internet claims, debate or justification.  The demand exceeds supply already.  
      The coils are now available in the US, drop shipped from Russia and he's set up to accept PayPal.  They're produced in small batches, so a wait list is already starting.  
      I believe Jasong is due to receive his coils soon, if he has not already.  I look forward to hearing what Jasong has to say after his own testing and observations.  
       
       
    • By Trent King
      We have had one here for a month now and have been unable to use it 🤷‍♂️.  Tried the patch cable made by Steve first, zed says coil not connected 🤔, checked points with a multimeter all seemed correct.  Decided there had to be something wrong with our patch lead so sent it off to the mob in kalgoorlie to make a ‘proper’ one,  finally got it back and tried again, same problem 🤦‍♂️
      I’m a bit disappointed as we wanted to run it over some ground on the ugly nugget patch where we have got several multi oz pieces, but the mines department here only let you keep a certain amount of ground open so we are forced to rehabilitate it without getting to test as we need to move areas.  Hopefully Yank 2 can get a replacement before his trip is over so I can try it on some other ground we have.
×
×
  • Create New...